Skip to content
X-Plane 4 min read

What are the default keyboard controls in X-Plane 11?

Ian Stephens
In short

See the default X-Plane 11 keyboard controls for flying, engines, brakes, views and simulator functions, plus how to change or fix bindings.

X-Plane 11's default keyboard controls use the numeric keypad for pitch, roll and yaw, F1-F8 for engine controls, 1-4 for flaps and speed brakes, G for landing gear, B and V for braking, and Shift+1 through Shift+9 for views. Assignments can be searched or changed under Settings > Keyboard.

Essential X-Plane 11 keyboard controls

The factory mapping provides keyboard commands for basic flight, aircraft systems, camera views and simulator functions. X-Plane has hundreds of additional commands, including radio and navigation functions; our downloadable X-Plane 11 keyboard-command reference provides the broader list.

These are stock assignments. Migrated preferences, previous edits, plug-ins and custom aircraft can make the active controls differ, so the Keyboard settings screen remains authoritative.

Flight controls, flaps, gear and brakes

KeyDefault command
Numpad 8Pitch down
Numpad 2Pitch up
Numpad 4Roll left
Numpad 6Roll right
Numpad 1Yaw left
Numpad 3Yaw right
Numpad 5Centre keyboard flight controls
[Nose-down pitch trim
]Nose-up pitch trim
1Retract flaps one step
2Extend flaps one step
3Retract speed brakes one step
4Extend speed brakes one step
GToggle landing gear
BToggle regular braking effort
VToggle maximum braking effort

The flap and speed-brake numbers are on the main number row, while pitch, roll and yaw use the numeric keypad. Fixed-gear aircraft and aircraft with custom system logic may ignore commands that do not apply.

Engine controls

KeyDefault command
F1Decrease throttle
F2Increase throttle
F3Decrease propeller RPM
F4Increase propeller RPM
F5Lean mixture
F6Enrich mixture
F7Carburettor heat off
F8Carburettor heat on
Ctrl+Shift+EAutomatically start the engines

These commands affect applicable engines and controls. A turbine aircraft with FADEC, for example, may show no response to propeller, mixture or carburettor-heat keys because it does not use those controls in the same way.

Default view controls

KeyDefault view
WForward view with 2-D panel, where available
Shift+1Linear spot view
Shift+2Still spot view
Shift+3Runway view
Shift+4Circle view
Shift+5Tower view
Shift+6Ride-along view
Shift+7Weapon view
Shift+8Chase view
Shift+93-D cockpit view
=Zoom in
-Zoom out

Shift+9 is the quickest way back inside after using an external camera. Our explanation of returning to the cockpit view also covers cases where an aircraft loads into an unexpected camera position.

Simulator and ground-operation commands

KeyDefault command
PPause or resume the simulation
MOpen the map
EnterOpen the ATC window
Shift+PStart or stop pushback

Pushback can be affected by brake state and aircraft steering. The X-Plane 11 pushback instructions explain how Shift+P, braking and direction control work together.

How do I view or change X-Plane 11 key bindings?

X-Plane 11 displays the active assignment for every keyboard command under Settings > Keyboard.

  1. Open the Keyboard screen. Select Settings, then Keyboard, either from the main screen or while a flight is loaded.
  2. Search for the command. Use terms such as landing gear, pitch trim, brakes or 3-D cockpit.
  3. Select the required command. Press the key or key combination you want to assign.
  4. Check for conflicts. Remove or replace another assignment if the same key triggers an unwanted command.
  5. Finish and test it. Return to the aircraft and confirm that the command works in the expected operating state.

Use the reset-to-defaults control on this screen if you want the factory layout back. That reset replaces customised keyboard assignments, so record any bindings you want to recreate first.

Why are the default X-Plane 11 keys not responding?

Unresponsive shortcuts usually result from keypad mode, laptop function-key behaviour, keyboard focus, changed assignments or aircraft-specific systems.

  • Numeric keypad: the top-row numbers do not replace the numpad flight controls. Toggle Num Lock if the keypad is sending navigation keys rather than keypad commands.
  • Laptop F-keys: media and brightness functions may intercept F1-F8. Hold the laptop's Fn key or change its function-key mode.
  • Keyboard focus: close text-entry boxes, plug-in windows or search fields, then click back into the simulator.
  • Modified bindings: search for the command in Settings > Keyboard instead of assuming the factory key is still assigned.
  • Aircraft logic: autopilot servos, FADEC, gear interlocks and custom plug-ins can prevent an otherwise valid command from producing visible movement.

A mistake we see often is repeatedly resetting every preference when only one key has been reassigned. Work through our X-Plane keyboard troubleshooting checks before removing preferences or plug-ins.

Can X-Plane 11 be flown with a keyboard alone?

X-Plane 11 can be flown using only the keyboard, but the controls move in discrete steps rather than providing the smooth analogue input of a joystick, yoke or pedals. Tap the numpad controls, centre them with Numpad 5, and trim frequently to avoid overcontrolling the aircraft.

Keyboard-only control is adequate for learning systems, operating views or repositioning an aircraft. For take-off, landing, formation flying and crosswind work, an analogue flight-control axis gives much finer pitch, roll and yaw control.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members