Skip to content
Microsoft Flight Simulator 5 min read

How is landing smoothness scored in MSFS 2024 Career Mode?

Ian Stephens
In short

Learn how MSFS 2024 Career Mode scores landing smoothness, what lowers the rating, why a gentle touchdown can score poorly and how to improve it.

In MSFS 2024 Career Mode, landing smoothness is scored mainly from the aircraft’s vertical impact at touchdown: a low, controlled sink rate earns more than a firm arrival. It is not simply a displayed feet-per-minute value, and the final mission grade also reflects landing precision, procedure compliance, handling and rollout control.

What does the landing smoothness score measure?

The score measures how gently the aircraft transitions from flight to weight on its landing gear. Vertical speed and impact at wheel contact are the main influences, while bouncing, dropping the nosewheel or arriving with significant lateral movement can turn an apparently acceptable landing into a poor one.

Microsoft Flight Simulator 2024 does not expose a dependable universal formula or a set of feet-per-minute thresholds for Career Mode. Claims that one particular touchdown rate always produces a perfect score should therefore be treated cautiously. Simulator updates, aircraft contact points and the way each landing develops can all affect the recorded event.

Landing factorLikely scoring effect
Low, controlled vertical speedImproves landing smoothness when the aircraft settles without floating or stalling onto the runway.
Firm first wheel contactLowers smoothness even if the aircraft subsequently settles gently.
Bounce or porpoiseUsually produces a poor result because one of the contacts is likely to have a high impact.
Excess approach speedIndirectly hurts the result by causing a long float, late touchdown or forced nose-down input.
Centreline and touchdown-zone accuracyPrimarily affects precision and the wider mission assessment rather than replacing the vertical-impact score.
Braking and directional controlAffects rollout and overall mission performance after the initial touchdown.

Is landing smoothness the same as landing rate?

No. Landing rate is a useful indicator, but the Career Mode score is a simulator assessment rather than a universal raw feet-per-minute reading. The cockpit vertical-speed indicator is also damped and may not show the exact descent rate at the instant the wheels make contact.

For ways to inspect the touchdown more closely, see our explanation of how to check landing rate and interpret the available measurements. Do not judge a landing from one number alone: aircraft attitude, bounce, side load and nosewheel handling all matter.

Why did a gentle touchdown still score poorly?

A gentle-looking flare can still hide a firm first contact or other errors that reduce the score. The outside view may show the aircraft settling smoothly after one wheel has already struck the runway harder than expected.

  • You floated beyond the touchdown zone: the vertical contact may have been soft, but landing precision and the final mission grade can still suffer.
  • One main wheel touched first: this is normal in a crosswind, but excessive bank or lateral drift can create a harder individual contact.
  • The aircraft bounced: the first contact may feel light while the second is much firmer.
  • You forced the nosewheel down: a soft main-gear touchdown does not cancel rough handling immediately afterwards.
  • Another mission category was weak: procedure violations, missed objectives or poor rollout control can lower the final grade even when landing smoothness itself is good.

This distinction is clearer in our breakdown of smoothness, precision and ground-roll scoring. Landing Challenges and Career Mode do not necessarily use identical weightings, but they demonstrate why a “buttered” landing is not automatically a high-quality landing.

How do you improve landing smoothness in Career Mode?

  1. Stabilise the final approach. Establish the aircraft’s appropriate landing configuration, target speed and descent path before the flare. Large late corrections create vertical and lateral movement at touchdown.
  2. Avoid carrying excess speed. Too much speed encourages floating. Trying to rescue the landing near the runway’s end often produces a forced, flat touchdown.
  3. Flare progressively. Reduce the descent rate without pulling abruptly or attempting to hold the aircraft above the runway indefinitely.
  4. Let the main gear accept the weight. Hold the landing attitude briefly after contact and lower the nosewheel under control rather than pushing it onto the runway.
  5. Manage crosswinds properly. Remove drift before touchdown while retaining enough into-wind control to prevent the upwind wing from lifting.
  6. Control the rollout. Maintain the centreline and apply braking, spoilers and reverse thrust progressively where the aircraft provides them.

A mistake we see constantly is chasing an extremely low touchdown rate at the expense of runway remaining. Aim for a controlled touchdown in the correct zone, not the softest possible contact at any cost. Our practical MSFS 2024 landing techniques cover approach speed, flare timing and rollout in more detail.

What about helicopter missions?

For helicopters, the same broad principle applies: arrest the descent before ground contact and touch down with minimal vertical and lateral movement. Avoid dropping the collective abruptly near the surface or allowing the skids or wheels to contact while the helicopter is still drifting.

Does landing smoothness determine the whole mission grade?

No. Landing smoothness is only one part of Career Mode’s wider evaluation. The simulator can also consider mission objectives, procedural compliance, aircraft handling and other phases of the flight, so a good touchdown cannot erase earlier mistakes. Our guide to the Career Mode structure and debrief explains how those elements fit together.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members