Skip to content
Microsoft Flight Simulator 6 min read

How do I set up a WinWing MCDU for PMDG 777 in MSFS?

Ian Stephens
In short

Set up a WinWing MCDU with the PMDG 777 in MSFS, select the right SimAppPro profile, then fix blank screens, dead keys and wrong CDU mapping.

To set up a WinWing MCDU with the PMDG 777 in Microsoft Flight Simulator, connect it to the PC, update it in SimAppPro, select the PMDG 777 profile for the correct simulator, assign the desired CDU position, and keep SimAppPro running while the powered aircraft is loaded. Do not create ordinary MSFS key bindings.

This is a Windows PC setup. SimAppPro provides the aircraft integration, so the MCDU cannot be configured this way on Xbox Series or PlayStation consoles.

Set up the WinWing MCDU step by step

  1. Complete the basic hardware installation. Connect the MCDU directly to the PC for the first setup rather than through an unpowered USB hub. Install SimAppPro and confirm that it detects the correct device. Our WinWing installation and duplicate-binding checklist covers the underlying software, firmware and USB checks.
  2. Update SimAppPro and the MCDU firmware together. Restart the device after any firmware update and verify that its display and controls appear normally inside SimAppPro before opening Microsoft Flight Simulator.
  3. Select the correct simulator. Choose Microsoft Flight Simulator 2020 or Microsoft Flight Simulator 2024 as appropriate. These are separate integrations; selecting the 2020 profile will not reliably control an aircraft loaded in MSFS 2024.
  4. Load the PMDG 777 profile. Select the PMDG 777 and the installed variant if SimAppPro separates them. PMDG calls the cockpit unit a CDU rather than an MCDU, so the profile may be listed under CDU hardware or aircraft integration. Do not substitute an Airbus, default Boeing or PMDG 737 profile.
  5. Choose the CDU position. Assign a single unit to the left CDU first, which is the most useful position for normal captain-side operation. Apply or save the profile. If SimAppPro offers an aircraft integration component or data-output option, install the one specifically identified for the PMDG 777 and restart the simulator.
  6. Remove conflicting MSFS assignments. If the MCDU appears in the MSFS Controls Options screen, clear any automatic flight-control, camera or keyboard assignments attached to it. SimAppPro should send the CDU events; duplicate bindings often produce double presses or unrelated cockpit commands.
  7. Load and power the aircraft. Leave SimAppPro running, load the PMDG 777, and provide electrical power to the avionics. A cold-and-dark aircraft will not generate an active CDU display until it is powered; use our PMDG 777 electrical power and startup sequence if both cockpit CDUs are blank.
  8. Test input and output separately. Open the mapped MENU page, type a few letters into the scratchpad, clear them, and press a line-select key. The external display should follow the cockpit CDU without delayed or repeated input. The PMDG POS INIT and IRS alignment procedure provides a practical test of the keypad, scratchpad and line-select keys.

Do I need to bind every MCDU button in MSFS?

No. A supported PMDG 777 profile uses SimAppPro to handle both the CDU display and aircraft-specific button events. Ordinary MSFS bindings cannot reproduce the complete CDU interface and can conflict with the profile.

The WinWing MCDU has an Airbus-style faceplate, while the PMDG 777 uses a Boeing CDU. The alphanumeric keypad and line-select keys are familiar, but several printed function labels do not match their Boeing functions. Follow the positional mapping shown in SimAppPro rather than assuming every faceplate label describes the PMDG command it sends.

If the PMDG 777 is absent from the available aircraft list, update SimAppPro and reconnect the device. Do not force another aircraft's profile. If it remains absent, that combination of SimAppPro, MCDU model and simulator is not providing full PMDG 777 integration; manual MSFS assignments will not solve the missing display-data connection.

Why is the WinWing MCDU blank or not responding?

A blank or unresponsive MCDU normally points to aircraft power, the wrong profile, a failed integration component or a USB communication problem.

SymptomLikely cause and fix
SimAppPro does not detect the MCDUReconnect it directly to another PC USB port, check its power and data connection, then restart SimAppPro. Avoid an unpowered hub during diagnosis.
Both the cockpit CDU and WinWing screen are blankPower the PMDG 777 electrical and avionics systems. Also check the cockpit CDU and hardware display brightness.
The cockpit CDU works but the WinWing screen is blankConfirm that the PMDG 777 profile, correct simulator and intended left, centre or right CDU are selected. Reinstall any SimAppPro integration component offered for that aircraft.
Keys work but the display is frozenThe input path is active but aircraft data is not reaching the hardware. Restart SimAppPro and MSFS, verify the PMDG-specific integration, and remove obsolete duplicate connector components.
The screen updates but keys do nothingReapply the aircraft profile and run SimAppPro and MSFS with the same Windows permission level. Normally both should run without administrator mode.
One press produces two charactersClear duplicate MSFS bindings and close any second program sending the same CDU event.
Airbus pages or incorrect commands appearThe generic Airbus profile is active. Switch to the PMDG 777 profile; the Airbus-style printed labels on the hardware itself will not change.
The device disconnects during a flightTry a direct motherboard USB port and check Windows USB power-saving settings. Repeated random disconnects are usually a USB issue rather than a PMDG fault.

If SimAppPro's PMDG profile specifically instructs you to enable PMDG SDK or data broadcasting, follow the instructions displayed for the installed 777 package. Do not copy a PMDG 737 options file or package path, because the aircraft and simulator installations use different components.

Can one WinWing MCDU control all three PMDG 777 CDUs?

One WinWing unit is normally assigned to one PMDG 777 CDU position at a time. The left CDU is the sensible default; select the centre or right CDU in SimAppPro when a profile exposes those targets.

Not every profile supports changing positions during a live flight. For three independent, simultaneous CDU displays, the software must support all three positions and each position requires its own hardware unit. Test one left-side installation fully before adding another device.

Does the setup differ between MSFS 2020 and MSFS 2024?

The hardware procedure is similar, but each simulator needs its own SimAppPro selection and compatible PMDG 777 integration. After changing simulator versions, reselect the simulator and aircraft profile instead of reusing an old configuration blindly.

If the MCDU works in MSFS 2020 but not MSFS 2024, first check the selected simulator profile and the installed integration component. The aircraft can be powered and functioning perfectly while SimAppPro is still listening for the other simulator.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members