FSX / P3D Repaint for Payware Model

FSX Messerschmitt Bf108 Taifun Polish Pack

Messerschmitt Bf 108 Taifun receives three historically based Polish post-war repaints for FSX, covering civil SP-AIO and two 9th Independent Liaison Squadron schemes flown from 1947 to 1952. Version 3 refines markings and tones using the original paint kit, and requires the payware Classics Hangar Bf108.

No ratings yet Rate 490 downloads since 2013 24.73 MB Scanned clean · Jul 2026 Added
Flight Simulator X Prepar3D
Repaint — payware base required

Final v3 version of the skinpack dedicated to Bf108 Taifun in Polish post-WW2 service. This version fixes several mistakes in the description and changes the color of one of the planes a little bit. The skin pack was created for the payware Messerschmitt Bf108 Taifun by Classics Hangar and was done using the original paint kit. The pack consists of three repaints: civil registered SP-AIO and two military skins of the 9th Independent Liaison Squadron. All the Taifuns served between 1947 and 1952. By Lukasz Kubacki.

Screenshot of Messerschmitt Bf 108 SP-AIO on the ground.

Screenshot of Messerschmitt Bf 108 SP-AIO on the ground.

This pack contains three repaints for the payware Messerschmitt Bf108 Taifun by Classics Hangar. First, wk.no. 5226 with the reg.number SP-AIO used by the Central Staff of Aviation League, second, the same plane after being put to 9th Independent Liaison Squadron service, and third, wk.no. 2278 which served in the 9th Liaision Squadron, too.

This is a V.3 version of the skinpack. If you have the old one, simply overwrite the old folders texture.SPAIO and texture.SPAIO2 and replace the two old entries in the aircraft.cfg by the three new ones provided below.

Installation:

  • Copy "texture.SPAIO", "texture.SPAIO2" and "texture.9ILS" folders into FSX/SimObjects/Airplanes/Classics_Hangar_Bf108B.
  • Open aircraft.cfg with your notepad and paste the following section under the last [flightsim.xx] entry:

[fltsim.xx]
title = Messerschmitt Bf 108 SP-AIO
sim = CH_Bf108B
model =
panel =
sound =
texture = SPAIO
kb_checklists = CH_Bf108B_check
kb_reference = CH_Bf108B_ref
ui_typerole = Single Engine Prop
ui_createdby = Classics Hangar
ui_manufacturer = Messerschmitt
ui_type = Bf108B Taifun
ui_variation = Central Staff of Aviation League
atc_id = SP-AIO
description = A former Luftwaffe Taifun which was reconstructed in the PZL-1 Mielec factory in Poland and brought to airworthy conditions. The plane served in the Central Staff of Aviation League between 1947 and 1948.

[fltsim.xx]
title = Messerschmitt Bf 108 SP-AIO v2
sim = CH_Bf108B
model =
panel =
sound =
texture = SPAIO2
kb_checklists = CH_Bf108B_check
kb_reference = CH_Bf108B_ref
ui_typerole = Single Engine Prop
ui_createdby = Classics Hangar
ui_manufacturer = Messerschmitt
ui_type = Bf108B Taifun
ui_variation = 9th Independent Liaison Squadron
atc_id = 5226
description = A former Luftwaffe Taifun which was reconstructed in the PZL-1 Mielec factory in Poland and brought to airworthy conditions. The plane served in the Central Staff of Aviation League between 1947 and 1948 and later was repainted and served in the 9th Independent Liaison Squadron together with green-painted Bf108 Taifun no.2278

[fltsim.xx]
title = Messerschmitt Bf 108 9th ILS
sim = CH_Bf108B
model =
panel =
sound =
texture = 9ILS
kb_checklists = CH_Bf108B_check
kb_reference = CH_Bf108B_ref
ui_typerole = Single Engine Prop
ui_createdby = Classics Hangar
ui_manufacturer = Messerschmitt
ui_type = Bf108B Taifun
ui_variation = 9th Independent Liaison Squadron
atc_id = 2278
description = A former Luftwaffe Taifun which was reconstructed in the PZL-1 Mielec factory in Poland and brought to airworthy conditions. The plane received dark green cammo and chessboards and served in the 9th Independent Liaison Squadron together with the Bf108 no 5226.

  • Save the aircraft.cfg and you are done!

Happy flying!

Ready to download Messerschmitt Bf108 Taifun Polish Pack?

Free for all simmers · 24.73 MB · Scanned clean Jul 2026

File information

Filename
bf_108_polish_pack_v3.zip
File size
24.73 MB
Added
Virus scan
Clean ClamAV · Jul 2026
Access
Freeware
Content rating
Everyone

Download speed: Free tier is capped at 0.5 Mbps (this file takes approximately 7 mins at the cap). PRO members download at full line speed.

How to install this mod

FSX / P3D Repaint for Payware Model
  1. Extract the downloaded archive

    Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
  2. Add livery to base aircraft folder

    Place the texture folder (typically texture.{airline}) inside FSX\SimObjects\Airplanes\{base-aircraft}\.
  3. Update aircraft.cfg

    Open the base aircraft.cfg in Notepad. Add a new [fltsim.X] section per the readme.
  4. Always read the included readme

    Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.

What’s inside this archive

The archive bf_108_polish_pack_v3.zip has 51 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory File Date File Size
1.jpg06.12.1191.62 kB
2.jpg06.12.1190.01 kB
3.jpg06.12.1188.47 kB
readme.txt06.12.113.19 kB
texture.9ILS06.12.110 B
bf108_c_2_t.dds06.10.115.33 MB
bf108_decals_t.dds06.10.111.33 MB
ch_bf108_1_bump.dds05.23.115.31 MB
ch_bf108_1_spec.dds06.09.115.33 MB
ch_bf108_1_t.dds06.10.115.33 MB
ch_bf108_2_bump.dds05.24.111.33 MB
ch_bf108_2_spec.dds06.09.115.33 MB
ch_bf108_2_t.dds06.10.115.33 MB
ch_prop_german.dds05.21.1184.12 kB
ch_prop_german_disk.dds05.20.1184.12 kB
pilot_1_spec.dds04.06.111.33 MB
pilot_1_t.dds05.26.111.33 MB
texture.cfg06.07.11327 B
thumbnail.jpg06.12.1119.93 kB
texture.SPAIO06.12.110 B
texture.SPAIO206.12.110 B
bf108_c_2_t.dds06.12.115.33 MB
bf108_decals_t.dds06.12.111.33 MB
ch_bf108_1_bump.dds05.23.115.31 MB
ch_bf108_1_spec.dds06.09.115.33 MB
ch_bf108_1_t.dds06.12.115.33 MB
ch_bf108_2_bump.dds05.24.111.33 MB
ch_bf108_2_spec.dds06.09.115.33 MB
ch_bf108_2_t.dds06.12.115.33 MB
ch_prop_german.dds05.21.1184.12 kB
ch_prop_german_disk.dds05.20.1184.12 kB
pilot_1_spec.dds04.06.111.33 MB
pilot_1_t.dds05.26.111.33 MB
texture.cfg06.07.11327 B
thumbnail.jpg06.12.1120.49 kB
bf108_c_2_t.dds06.12.115.33 MB
bf108_decals_t.dds06.12.111.33 MB
ch_bf108_1_bump.dds05.23.115.31 MB
ch_bf108_1_spec.dds06.07.115.33 MB
ch_bf108_1_t.dds06.12.115.33 MB
ch_bf108_2_bump.dds05.24.111.33 MB
ch_bf108_2_spec.dds06.07.115.33 MB
ch_bf108_2_t.dds06.12.115.33 MB
ch_prop_german.dds05.21.1184.12 kB
ch_prop_german_disk.dds05.20.1184.12 kB
pilot_1_spec.dds04.06.111.33 MB
pilot_1_t.dds05.26.111.33 MB
texture.cfg06.07.11327 B
thumbnail.jpg06.12.1120.87 kB
flyawaysimulation.txt10.29.13959 B
Go to Fly Away Simulation.url01.22.1652 B

Rate this add-on

PRO perk

Only PRO members can place votes.

1 comment

Read what other simmers think, or add your own.

Leave a comment
Comments below are opinions of individual posters and don’t always reflect Fly Away Simulation’s views. Every comment is manually moderated before publication.
  1. david_wi PRO

    By me the textures are not complete

    Link

Leave a comment

Replying to

Used only for your Gravatar avatar — never shown publicly or shared.

Minimum 30 characters 0
Your comment is reviewed by a moderator before publication. Spam, abuse and self-promotion are removed.