FSX Beechcraft T-34 N134HC

Beechcraft T-34 N134HC. Textures and new IFR panel for the Carenedo T-34. This depects a real world livery of N134HC. Tested with FSX SP2 Acceleration. Repaint by John Detrick.

SP2 Accel. Textures and new panel for Carenedo's T-34. This is painted to represent a real world liveryof N134HC owned by Harold Cannonof Owensboro KY. I don't know what his panel looks like, so I decided that this aircraft was due an avionics overhaul. Now this bird is fully IFR equipped. Just place the textures.N134HC and panel.new file into your Mentor Navy file. Place the N134HC jpg into your Mentor Navy file as well.

Copy and paste the following into your aircraft cfg:

[fltsim.x]
title=T-34 Mentor N134HC
sim=mentor
model=
panel=new
sound=
texture=N134HC
kb_checklists=mentorcheck
kb_reference=mentor_ref
ui_manufacturer=Beechcraft
ui_type=Mentor T-34
ui_typerole="Single Engine Prop trainer"
ui_createdby="Carenado"
ui_variation=N134HC
description=...If you forgot ADF navigation it's a good time for you, to refresh your memory...If you don't know how to fly with ADF, it is time for you to learn how to.....Set realism to full and enjoy this bird!!!/ Wing Span 32.8 feet Length 25. 9 feet Height( at rest) / 9. 6 feetTread 9. 6 feet / GROSS WEIGHT: 2950 pounds. / © Carenado\www.carenado.com Repaint by John Detrick
atc_heavy=0
atc_id=140688
atc_airline=
atc_flight_number=
atc_id_color=0000000000
visual_damage=1
ui_thumbnailfile=N134HC.jpg

Cut and paste this new Radio section into your aircraft cfg:

[Radios]
// Radio Type=availiable, standby frequency, has glide slope
Audio.1=1
Com.1=1, 1
Com.2=1, 1
Nav.1=1, 1, 1
Nav.2=1, 1, 0
Adf.1=1
Transponder.1=1
Marker.1=1

Remember to delete the old section.

Cut and paste this into your aircraft cfg to enable the autopilot and flight director:

[autopilot]
autopilot_available=1
flight_director_available=1
default_vertical_speed=700.000000
autothrottle_available=0
pitch_takeoff_ga=8.000000
use_no_default_pitch=1
use_no_default_bank=1
default_pitch_mode=0
default_bank_mode=0
max_pitch=10.000000
max_pitch_acceleration=1.000000
max_pitch_velocity_lo_alt=2.000000
max_pitch_velocity_hi_alt=1.500000
max_pitch_velocity_lo_alt_breakpoint=20000.000000
max_pitch_velocity_hi_alt_breakpoint=28000.000000
max_bank=20.000000
max_bank_acceleration=1.800000
max_bank_velocity=3.000000
max_throttle_rate=0.100000
nav_proportional_control=9.000000
nav_integrator_control=0.250000
nav_derivative_control=0.000000
nav_integrator_boundary=2.500000
nav_derivative_boundary=0.000000
gs_proportional_control=9.520000
gs_integrator_control=0.260000
gs_derivative_control=0.000000
gs_integrator_boundary=0.700000
gs_derivative_boundary=0.000000
yaw_damper_gain=0.000000

Remember to remove the old entries.

Place the New Mentor Cab file into your gauges folder.
This cab file is compiled from default gauges. With the exception of the Landing GearIndicator. This modified from the P-3cab used with the Team KBT P3. The airspeed indicator has been modified to correctly reflect the limiting airspeeds per the FAA Type Certificate Data Sheet.

Finally, copy and paste the Mentor gauge and cab files from your panel file into the panel.new folder. This puts the default Mentor gauges into the new panel.

That should do it.

John Detrick