Import a SimBrief flight plan into X-Plane 12 with the correct .fms file and folder, plus fixes for missing routes, navdata errors and FMS issues.
To import a SimBrief flight plan into X-Plane 12, generate the plan in SimBrief, download the X-Plane 11/12 .fms export, and save it in X-Plane 12/Output/FMS plans. Load that file through the aircraft's GPS or FMS, then check procedures, discontinuities and the active leg before departure.
How to import a SimBrief flight plan into X-Plane 12
Use the standard X-Plane .fms route unless the aircraft's documentation specifies its own SimBrief integration or company-route format.
- Generate the operational flight plan: In SimBrief, select the correct aircraft profile, departure, destination and route. If that stage is unfamiliar, follow our SimBrief planning and export walkthrough.
- Download the X-Plane export: Choose the X-Plane 11/12
.fmsoption. X-Plane 12 uses the same standard route-file format; an MSFS.plnfile or an aircraft-specific file will not work in the normal X-Plane loader. - Save it in the correct folder: Place the file directly in
X-Plane 12/Output/FMS plans. If using an automatic downloader, confirm that its export path points to the active X-Plane 12 installation rather than an older X-Plane copy. - Load the stored route: Power the aircraft's avionics and open its flight-plan, route or company-route page. Select the exported plan, or enter its base filename without
.fmsif the unit requests a route name. - Inspect the route before activating it: Check the origin, destination, first active leg, SID, STAR, approach and every discontinuity. Re-select procedures when required by the runway, weather or ATC clearance.
A common mistake is adding the SID or STAR again when it is already present in the imported route. That can create duplicate fixes, route loops or an unexpected return to an earlier waypoint.
Which X-Plane 12 loader should I use?
The correct loading method depends on the avionics fitted to the aircraft, not just the simulator version.
| Avionics | Where to load the plan | Main limitation |
|---|---|---|
| Laminar GPS or X1000 | Stored flight-plan catalogue or flight-plan menu | A custom G1000 implementation may use a different loader |
| Default-style airliner FMS | Route or company-route function | Some units request the filename without its extension |
| Third-party airliner | Aircraft EFB, SimBrief function or custom FMS page | It may ignore Output/FMS plans entirely |
For a conventional airliner CDU, our aircraft-specific X-Plane FMS loading guidance covers company routes, procedure checks and discontinuities. Aircraft using Garmin-style avionics need the separate G1000 import and activation procedure.
Why is my SimBrief plan not appearing?
Most missing SimBrief plans are caused by the wrong folder, wrong file type or an aircraft that uses custom avionics.
- Check the installation root: The correct location is inside the X-Plane 12 copy you actually launch. Multiple installations are easily confused.
- Check the extension: The filename must end in
.fms, not.fms.txt. Keep a simple filename without unusual punctuation if the FMS rejects it. - Check for nested folders: The file should sit directly inside
Output/FMS plans, not in an extra folder created during extraction. - Refresh the avionics: Close and reopen the flight-plan catalogue. If it still does not update, reload the aircraft after confirming the file path.
- Check the aircraft manual: A custom FMS may require a pilot identifier, its own route folder or a built-in SimBrief request instead of a local
.fmsfile.
If the plan appears but waypoints or airways are rejected, compare the AIRAC cycle used by SimBrief with the navigation database available to X-Plane and the aircraft. A cycle mismatch can produce missing fixes, invalid airways or procedures that differ from the dispatch plan.
Does the .fms import include fuel, payload and ATC?
No; a standard .fms import primarily transfers the lateral route and does not configure the entire flight.
Fuel, payload, performance figures, winds and take-off data normally require separate entry. Aircraft with direct SimBrief integration may retrieve some of that information, but the capability varies by add-on. Loading the route into the cockpit FMS also does not guarantee that X-Plane's built-in ATC has received the same flight plan.
How do I make the autopilot follow the imported route?
An imported route must be active and the correct navigation source selected before the autopilot can follow it.
Confirm that the aircraft shows GPS or FMS guidance rather than VOR or localiser guidance, activate the intended first leg, and inspect the magenta course. Then use the aircraft's NAV or LNAV mode as appropriate. If the aeroplane turns towards an old waypoint, cancel any direct-to instruction and activate the correct leg instead.