Skip to content
Microsoft Flight Simulator 6 min read

How do I improve night lighting in MSFS 2020?

Ian Stephens
In short

Improve night lighting in MSFS 2020 with sharper city and runway lights, correct graphics settings, HDR fixes and cockpit brightness tips.

To improve night lighting in MSFS 2020, use native display resolution, start at 100 per cent render scaling, choose TAA if an upscaler smears distant lights, adjust Bloom for halo size, keep terrain and object detail high enough to limit pop-in, calibrate HDR properly, and dim an over-bright cockpit.

Most rendering controls below apply to the PC version. Xbox uses largely fixed graphics settings, so display calibration, HDR, cockpit brightness and scenery troubleshooting are the useful adjustments there. MSFS 2020 has no single night brightness or lighting-quality slider.

Which graphics settings improve MSFS 2020 night lighting?

Resolution, render scaling, anti-aliasing, Bloom and Level of Detail have the greatest visible effect on night lights.

  1. Create a controlled comparison. Use clear weather, a default aircraft and the same airport, viewpoint and local time. Fog, low cloud and rain deliberately scatter light, making it impossible to judge a graphics change fairly.
  2. Use the display's native resolution. Set render scaling to 100 as a baseline. Lower values make distant road and city lights soft or unstable; values above 100 can improve definition but carry a substantial GPU cost.
  3. Test TAA before using an upscaler. At native resolution, TAA often gives MSFS 2020 the most stable distant lights. DLSS or another temporal upscaler can recover performance, but aggressive performance modes may create trails, pulsing or smearing around tiny light sources. Use a quality mode if upscaling is necessary.
  4. Adjust Bloom to preference. Bloom gives lamps a visible glow, but excessive Bloom can turn runway and street lights into large fuzzy discs. Switch it off temporarily: if the underlying points become sharp, the problem is glow rather than resolution.
  5. Raise Terrain and Objects Level of Detail carefully. These settings can reduce early disappearance of buildings, airport objects and associated lights. Stop increasing them if the simulator becomes limited by the main thread or starts stuttering.
  6. Leave decorative effects in perspective. Light Shafts and Lens Flare change particular atmospheric or camera effects; they do not repair missing ground lights. Switching between DX11 and DX12 is not, by itself, a night-lighting upgrade.
  7. Apply one change at a time. Save the graphics settings and repeat the same scene before changing another option. This reveals whether a sharper image came from anti-aliasing, Bloom or simply different weather.

For a wider performance-quality balance, use our recommended MSFS graphics baseline rather than increasing every setting. Night scenes can look clearer at a steady frame rate than with higher settings and persistent stutter.

Why are night lights blurry, smeared or flickering?

Blurry or flickering lights usually point to low internal resolution, temporal upscaling, excessive Bloom or atmospheric scattering.

  • The entire scene is soft: confirm that MSFS matches the monitor's native resolution and that render scaling has not fallen below 100.
  • Lights leave trails while the camera moves: change from an upscaler's performance mode to its quality mode, or compare it with TAA.
  • Lights look like oversized glowing balls: reduce display brightness, test with Bloom off and check HDR calibration.
  • Edges crawl or lights pulse in the distance: avoid disabling anti-aliasing, restore native resolution and reduce sharpening applied by the monitor or graphics driver.
  • The problem appears only in fog or rain: test in clear weather. Some glow is the intended result of light scattering through moisture.

Why do city lights pop in or disappear?

City-light pop-in usually comes from Level of Detail limits, missing streamed scenery data or a conflicting scenery add-on.

On PC, confirm that Online Functionality and Bing Data World Graphics are enabled if entire cities or scenery tiles look unusually sparse. Also check that the connection has not entered offline mode. Raising Level of Detail may extend the visible underlying objects, but it cannot create lighting absent from the scenery data.

If the fault affects one location, remove local scenery add-ons temporarily and load the area again. Test with an otherwise empty Community folder before deleting caches or reinstalling the simulator. Rebuilding the rolling cache is sensible only when scenery tiles are also corrupt or repeatedly fail to update; it is not a routine fix for every dim road.

How do I fix weak or missing runway lights?

When city lighting looks normal but one airport has weak, misplaced or missing lights, treat it as an airport-specific problem rather than changing global graphics settings.

Compare the affected airport with a default airport, then disable any airport enhancement or overlapping scenery package. Airport lighting can be limited by the source scenery or by duplicated add-ons, and Bloom cannot restore fixtures that are not present. Our airport-light troubleshooting steps cover runway, taxiway, approach-light and flickering problems in detail.

Can cockpit lighting make the outside scene look too dark?

An over-bright cockpit can make the outside scene appear darker through both visual contrast and the simulator's exposure response.

Reduce dome and flood lighting, then set instrument backlighting only high enough to read the panel. Avoid running every interior light at maximum intensity. Controls differ by aircraft, so use the correct pedestal, overhead, display and panel knobs; our guide to aircraft-specific cockpit lighting controls explains where to start.

Landing and taxi lights illuminate nearby surfaces but do not brighten cities or distant terrain. If only one aircraft has a weak beam, test another aircraft before altering the simulator's global settings.

Should I use HDR for night flying?

Use HDR only with a genuinely HDR-capable, correctly calibrated display; poorly configured HDR often crushes shadow detail or washes the night sky grey.

On PC, configure Windows HDR and the display before enabling HDR in MSFS 2020. On Xbox, use the console's HDR calibration and the display's appropriate game mode. Set black level and peak brightness carefully, and disable conflicting features such as dynamic contrast, artificial black enhancement or a simulated HDR effect.

Compare HDR and SDR after restarting the display mode, using the same scene. SDR is the better choice when HDR produces grey blacks, clipped lamps or a cockpit with no shadow detail. Raising overall brightness until the sky turns grey is not a fix for realistic darkness.

Will lighting mods improve night scenes?

A compatible lighting or scenery add-on can improve particular cities, roads or airports, but it should be installed only after the base simulator is configured correctly.

Use one global lighting replacement at a time and avoid stacking it with airport packages that alter the same light placements. After a simulator update, test without the add-on if lights disappear, double up or change colour unexpectedly. Our overview of useful MSFS graphics and lighting add-ons explains the available options and their trade-offs.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members