FSX / P3D scenery

FSX King George Airpark Scenery

King George Airpark (CSK8) in Surrey, British Columbia brings a missing ultralight-friendly strip to life near Vancouver, aligned to local ground references along the river with RWY 07/33 procedures in mind. Designed for FSX, it adds practical parking spots and clear VFR-focused layout detail for tight, low-level flying.

216 downloads 1.02 MB Scanned clean

Canada

Flight Simulator X Prepar3D

Images & Screenshots

6 total

A small white and blue aircraft with floats is parked on grass near a farmhouse and a green hangar, with trees behind.

A small single-engine aircraft is parked on grass near a stone fence, with a blue bus and several buildings in the background.

A small white single-engine aircraft is parked on a taxiway surrounded by orange cones near a hangar and a red car.

A small single-engine aircraft is parked on a grass field near rustic hangars, orange cones, and a windsock sign.

A small single-engine aircraft is parked on grass near orange cones, with a red barn and silo in the background.

Aerial view shows a small airpark with a single runway, adjacent farmland, winding river, and several buildings near a main road.

King George Airpark (CSK8), Surrey, British Columbia, Canada. A small airport for ultralight fans, missing from the default scenery. By Daniel Louvet.

King George Airpark Scenery.

King George Airpark is home of Ultralight aviation fan. It is located in Surrey,BC, only few miles south of YVR. FSX did not take care of this airpark.I replaced both of airstrip accordingly with the visual ground reference of the River and RWy07, bare in mind 50Ft obstacle procedure in effect for Rwy 07 and Rwy 33. Thanks FSX. VFR only when visiting CSK8. Parking spots available. Watch out for traffic on the ground, no much space to taxi freely though. Hope you'll enjoy your stop in awesome King George Airpark!

Feedbacks welcome!
Have fun!

Installation:
Drop the .bgl file in your FSX/Addon scenery/scenery folder.

ONLY!

Airports also available:
-CZBB Boundary Bay
-CYCD Nanaimo
-CYQQ Comox Valley + Update
-CYCZ Fairmont Hot Springs
-CYBA Banff airfield
-CYAZ Tofino
-CAK3 Delta Heritage Airpark
-CyCW Chilliwack Municipal
-CYYB North Bay
-CYPK Pitt Meadows
-CBQ2 Fort Langley

These airports are not designed for A.I traffic yet, although FSX did link all parking spot and did not modified them.
I will update them accordingly in a near future.

Thanks!

Dan

King George Airpark Scenery.

Ready to download King George Airpark Scenery?

Free for all simmers · 1.02 MB · Scanned clean

File information

Filename

csk8.zip

File size

1.02 MB

Virus scan

Clean (scanned with ClamAV)

Access

Freeware

Content rating

Everyone

Download speed: Free tier is capped at 0.5 Mbps. PRO members download at full line speed.

This is a freeware file — use is subject to our freeware copyright terms.

How to install this mod

FSX / P3D scenery

Extract the downloaded archive

Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
Place scenery in Addon Scenery

Create a folder under FSX\Addon Scenery\ containing scenery and texture sub-folders.
Activate in Scenery Library

In FSX, go to Settings → Scenery Library → Add Area. Higher priority means it overrides lower entries for the same location.
Always read the included readme

Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.

Finding the scenery

Use these coordinates to fly directly to this location once the mod is installed.

FSX / Prepar3D coordinates (or generate a flight plan)

49.06000000,-122.76000000

Decimal degrees

49.060000°, -122.760000°

Degrees, minutes, seconds

49° 03' 36.000" N 122° 45' 36.000" W

Launch FSX or Prepar3D and use Flights → Load to open the downloaded .pln file. Your aircraft will be positioned at this location.

What’s inside this archive

The archive csk8.zip has 11 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory	File Date	File Size
Read me.txt	04.03.09	1.25 kB
CSK8.BGL	04.03.09	20.39 kB
001.jpg	04.03.09	176.64 kB
002.jpg	04.03.09	181.07 kB
003.jpg	04.03.09	188.19 kB
004.jpg	04.03.09	177.05 kB
005.jpg	04.03.09	184.66 kB
006.gif	04.03.09	8.21 kB
007.jpg	04.03.09	142.98 kB
flyawaysimulation.txt	10.29.13	959 B
Go to Fly Away Simulation.url	01.22.16	52 B