United States of America

Page 2

Sort

Reset

Oil Platforms

Injects three Gulf of Mexico offshore oil-rig helipads—KLFO Lafayette, KGLO Galveston, KNGO Corpus Christi—into FSX, each offering GPS fixes, ADF/NDB beacons, VORs and 100 NM coverage, plus reworked ADE geometry, corrected deck elevation and accurate lighting for steady helicopter, turboprop or STOL navigation within this United States coastal scenery add-on.

: 1.6 MB
: 537

Miami International Airport

This FSX-specific refresh of Florida’s KMIA uses ADEX to rework taxiway geometry, align Terminal D gates, activate cross-wind operations, embed accurate signage, add designated parking and extra fuel-truck circuits—yielding a contemporary airport layout that dovetails with current FAA charts inside the sim’s default scenery framework.

: 3.13 MB
: 7.2K
: 5/5

Utah Complete

Covering Utah’s terrain extremes from the Bonneville Salt Flats to the Uinta summits, this FSX scenery add-on refines Salt Lake City International plus fifteen regional airfields through corrected AFCAD coding, richer landclass, photoreal mesh and custom structures, while bundled v1.1–1.2 updates address additional airport data, taxiway, terrain and approach tweaks.

: 4.25 MB
: 6.5K
: 5/5
: 14

Colorado Photoreal

High-resolution 1 m/px orthoimagery spans Colorado’s full footprint, layering 16 GB of photoreal tiles over a 10 m elevation mesh so FSX, FSX:SE and P3D v4-v5 flyers see Denver, Boulder, Aspen and the Front Range rendered with accurate DEM relief, VFR-friendly ground textures and true-to-chart city placement.

: 16.09 GB
: 5.6K
: 5/5
: 45
: 1

Phoenix Sky Harbor International

Covering KPHX in Arizona’s desert basin, this FSX SP2 package overlays high-resolution orthoimagery, FSX-native animated jetways, vehicular traffic and autogen foliage, revises taxiway geometry and signage, and incorporates the new ATC tower, ASR-9 radar, 3-D PAPI fixtures, blast fencing, and a Terminal 3 rooftop helipad beacon.

: 19.98 MB
: 5.2K
: 4/5
: 25

New Orleans International Airport

This HD update for FSX refreshes Louis Armstrong New Orleans International (KMSY) in Louisiana with photoreal, georeferenced ground polys, custom Google SketchUp terminals including the 2012 Concourse D extension, 2013 car-rental garage, corrected gate signage, precise ADE-aligned taxiways, and proper ATC logic for 01/19 departures, giving United States flyers accurate ramp layouts.

: 26.41 MB
: 4.9K
: 7

McCarran International Airport

KLAS—McCarran International for Microsoft Flight Simulator X refreshes the Las Vegas hub with current taxiway geometry, correct runway lighting, curved base-leg ILS paths, and gate assignments tuned for AI traffic packs, giving sim pilots a procedural layout that mirrors updated FAA charts while respecting desert autogen and Strip proximity.

: 2.76 MB
: 4.5K
: 5/5
: 6

KSEA Updated

Seattle–Tacoma International Airport (KSEA) AFCAD for FSX revises the stock airfield to current Jeppesen charts, inserting the new 16R/34L strip, realigned taxiways, precise ILS and RNAV approaches, coded gates matching Alaska Airlines, Horizon and FedEx operations, enlarged cargo stands, updated landclass, custom road traffic and vehicle networks to minimise AI hold-ups.

: 472.58 KB
: 3.9K
: 4/5
: 2

Denver Int'l Airport

Built for Microsoft Flight Simulator X, this Colorado scenery file overhauls Denver International Airport by expanding Concourse B and its commuter gates, inserting animated jetways, additional fuel bowsers, corrected service roads, activated crosswind runway logic and precise AFCAD-based stands that reflect current FAA diagrams.

: 3.49 MB
: 3.7K
: 5/5
: 1

O'Hare International Airport (KORD)

FSX KORD O’Hare scenery refresh brings updated runway geometry, chart-correct taxiway labels, expanded gates, and optional crosswind operation for smoother AI sequencing. Built with ADE by Ray Smith, this freeware mod for Microsoft Flight Simulator X aligns Chicago’s flagship hub with current FAA data and ground service routing.

: 128.1 KB
: 3.5K
: 5/5

Atlanta Hartsfield Airport

Atlanta’s KATL scenery overhaul for Microsoft Flight Simulator X updates runway lengths—including the remote 9,000-ft 10/28—adjusts NAV data, reshapes taxiway links, allocates realistic Delta, AirTran and cargo gates, and expands ramp parking, yielding smoother AI sequencing and chart-matched procedures across this high-density U.S. hub.

: 5.29 MB
: 3.4K
: 5/5
: 23

Meigs Field

Chicago’s historic Meigs Field KCGX is reinstated for Microsoft Flight Simulator X in this United States scenery add-on, recreating the lakefront peninsula with a 3,900-foot asphalt runway, four helipads and custom terminals built from high-resolution orthoimagery. The bundled AFCAD supplies runway lighting, correct Chicago Approach/Departure and ASOS frequencies, AI schedules, realistic taxiway signage and photoreal ground textures.

: 2.75 MB
: 3.3K
: 3/5
: 2

Fort Lauderdale Hollywood

Fort Lauderdale–Hollywood International Airport KFLL gains a targeted FSX overhaul featuring extended taxiway C, realistic cross-wind runway logic through selectable BGLs, refreshed service roads, extra GA and airline stands, a relocated tower viewpoint, helipad support and optimized ATIS integration for smoother AI traffic sequencing across Broward County’s primary air hub.

: 4.16 MB
: 2.8K
: 5/5
: 20

PANC

Anchorage’s subarctic hub comes updated for FSX with an ADE-built AFCAD featuring corrected runway 15/33 approaches, extended 7R/25L slab, functional crosswind logic, revised taxiway geometry, accurate signage, expanded GA and cargo stands, rebuilt service roads, extra fuel point callouts and authentic tower sight-line preset; ideal for busy AI schedules.

: 568.06 KB
: 2.5K
: 5/5
: 3

Western Kansas Airfields Scenery (Over 133 Airfields)

More than 133 western Kansas general-aviation strips are reworked here for FSX and every Prepar3D version; Steve Ziegler has updated runway geometry, aprons, parking stands and NDB entries with default library assets, ensuring smooth frame rates. Drawn from Wichita Sectional and state aeronautics data, each rural airport blends naturally into the Great Plains.

: 5.59 MB
: 2.2K
: 5/5
: 20

Albuquerque International (KABQ)

FSX Albuquerque International Sunport (KABQ) scenery refresh brings high-resolution terminal textures, updated AFCAD gate layout, dynamic tarmac lighting (fsx_lts.zip required), accurate airline parking codes, cargo stands, two RWY 08 hangars, Wyndham hotel model, refined Rio Grande valley landclass and native FSX animated jetways, supporting smooth VFR and IFR operations at New Mexico’s high-altitude hub.

: 1.26 MB
: 2.2K
: 5/5
: 1

Salt Lake City International Airport 2020

This Flight Simulator X scenery by Ray Smith redraws KSLC Salt Lake City International for the 2020 master plan, adding South Terminal A, North Concourse B, realigned runway 17/35, optional crosswind 14/32 operations, updated ILS/NAVAIDs, revised AFCAD parking for the Delta hub, rebuilt service roads, helipads, de-icing bays and an enlarged cargo apron.

: 4.91 MB
: 2.2K
: 5/5
: 15

Tucson Arizona International Airport

Tucson International (KTUS) for Microsoft Flight Simulator X provides a re-worked layout of this U.S. Southwest field with custom Gmax terminals, revised aprons and taxiways, current Jeppesen approach coding, gate designations for airline, general aviation and ANG traffic, optional crosswind runway functionality, AFCAD refinements, native night lighting and blended terrain.

: 1.72 MB
: 2.1K
: 5/5
: 1

NAS Corpus Christi

Naval Air Station Corpus Christi for Microsoft Flight Simulator X SP2/Acceleration delivers a detailed Gulf Coast military flight line: VT-27/28 T-34 Mentor ramps, VT-31/35 T-44 Pegasus and UC-12 Huron aprons, Coast Guard seawall base, Army rotorcraft depot and Homeland Security surveillance outpost, with native GMax objects, photoreal ground masks and optional car/rotor BGLs for frame-rate control.

: 44.02 MB
: 1.9K
: 4

San Antonio International Airport TX

FSX rendition of Texas’ San Antonio International Airport (KSAT) mirrors the mid-2000s field, keeping both Terminal 1 and the retired Terminal 2 satellite active, adds renovated cargo ramps, correct gate coding via AFCAD, ancillary hangars, fire station and Citation maintenance bays, suiting dense World-of-AI traffic and domestic hub operations.

: 4.41 MB
: 1.7K
: 5/5
: 1