Skip to content
Microsoft Flight Simulator 6 min read

MSFS 2020 settings not saving: how do I fix them?

Ian Stephens
In short

Fix MSFS 2020 settings not saving by checking Apply & Save, UserCfg.opt permissions, cloud sync, VR profiles and control presets.

MSFS 2020 settings usually fail to save because Apply & Save was skipped, the simulator was force-closed, UserCfg.opt is read-only or blocked, a cloud profile restores older values, or a protected control preset is being edited. Save normally first, then troubleshoot the affected category: graphics, controls, VR or account-synchronised options.

The UserCfg.opt checks below apply only to PC. On Xbox Series X|S, concentrate on the active Xbox profile, cloud synchronisation and fully quitting the simulator rather than leaving it in Quick Resume.

Which MSFS 2020 settings are failing to save?

The type of setting that reverts usually identifies the fault faster than reinstalling the simulator.

What revertsMost likely causeFirst action
Graphics settingsUserCfg.opt cannot be written, or an optimisation utility replaces itCheck the file and its modified time
VR graphics onlyThe separate PC or VR graphics profile was editedEnter VR before changing the VR profile
Controller bindingsA locked default preset or the wrong device profile is selectedCreate a custom preset for that device
Assistance or general optionsCloud-profile conflict or an interrupted shutdownSave, quit normally and check the signed-in account
Everything after each restartPermissions, security software or stale cloud dataTest one obvious setting and trace when it reverts

How do I make MSFS 2020 save settings properly?

Use Apply & Save and close Microsoft Flight Simulator normally before changing files or resetting data.

  1. Confirm the active profile. Make sure you are signed into the intended Microsoft/Xbox account. For graphics, check whether you are editing the PC or VR profile.
  2. Change one obvious setting. Alter a setting that is easy to recognise after restarting, rather than changing a whole page at once.
  3. Select Apply & Save. Do not simply press Back or close the window.
  4. Return to the main menu. Give the simulator time to finish writing its configuration and synchronising the profile.
  5. Quit normally. Use the simulator's Quit to Desktop command on PC. On Xbox, close the application with Quit from the dashboard instead of relying on Quick Resume.
  6. Restart and check. If the test setting remains changed, repeat the process for the other options.

Our explanation of the correct Apply & Save and shutdown workflow covers settings that require a restart and the mistakes that make changes appear to have been lost.

Why do my graphics settings reset after restarting?

Graphics settings that survive the menu but revert at the next launch usually point to an unwritable or replaced UserCfg.opt file.

Check whether UserCfg.opt is writable

UserCfg.opt stores the PC graphics configuration and the installed-packages path; it does not contain controller profiles. Steam and Microsoft Store installations keep it in different locations, so use our verified UserCfg.opt locations and file guide rather than searching random MSFS folders.

  1. Close MSFS 2020 completely. Also close any utility that applies recommended graphics settings.
  2. Back up the file. Copy UserCfg.opt somewhere safe before altering it.
  3. Inspect its properties. Clear Read-only if it is enabled and confirm your Windows account can write to the containing folder.
  4. Check security blocks. If Windows security or antivirus protection reports blocked access, allow the simulator rather than permanently disabling protection.
  5. Test the modified time. Launch MSFS, change one graphics option, use Apply & Save and quit normally. The file's modified time should update.

A GPU optimisation utility can also reapply its own preset whenever the simulator starts. Disable automatic optimisation for one test; if the setting then persists, adjust or remove the utility's MSFS profile. Our targeted graphics-reset checks cover cloud conflicts, presets and separate VR configurations in more detail.

Can I regenerate UserCfg.opt?

Yes, but regenerate UserCfg.opt only after backing it up and recording its InstalledPackagesPath entry. With MSFS closed, rename the file and relaunch the simulator so it creates a clean configuration.

This resets local graphics options, not cloud-synchronised controls. The launcher may also ask where the packages are installed; point it to the existing package location instead of starting an unnecessary content download. If the fresh file saves correctly, the original was damaged or contained an invalid setting.

Why will my MSFS 2020 control profile not save?

Control changes usually fail because the built-in default preset is protected or the binding was applied to a different device profile.

  1. Select the actual device. Choose the correct joystick, throttle, pedals, yoke or controller at the top of Controls Options.
  2. Create a custom preset. Duplicate the default preset or create a named profile instead of attempting to overwrite the protected original.
  3. Apply the binding. Confirm the assignment, resolve any validation warning and save the custom preset.
  4. Check the same device after restarting. Profiles are device-specific. A changed USB connection or device identity can make the saved preset appear to be missing.

If graphics save but bindings do not, leave UserCfg.opt alone and follow the separate control-profile saving checks.

How do I fix an MSFS cloud-sync conflict?

A cloud conflict can restore an older profile after MSFS has successfully saved newer settings locally.

  • Close MSFS on every other PC or Xbox using the same account before making another change.
  • Confirm that the simulator is signed into the intended Microsoft/Xbox profile, including when the PC edition was purchased through Steam.
  • Allow synchronisation to finish before entering the menus. If the platform presents a conflict, select the copy with the known-good device and timestamp rather than automatically choosing local or cloud data.
  • On Xbox, fully quit MSFS and restart the console if Quick Resume repeatedly restores the old session.
  • Do not delete cloud saves as an early troubleshooting step. If a local Xbox cache must be rebuilt, remove only the local console copy and let it resynchronise; do not choose an option that deletes data everywhere.

Should I reinstall MSFS 2020?

No—reinstallation should be a last resort because it may leave the faulty configuration in place or restore the same cloud profile.

First use the platform's verify or repair function, test whether a security tool is blocking writes, and determine exactly when the setting reverts. An immediate reversal indicates a missed save or protected preset; a change lost at the next launch suggests a file or optimisation utility; a change lost after synchronisation points to the cloud profile.

AI Assistant New

Still stuck? Ask Fly Away

Ask Fly Away is our AI flight-sim assistant. Ask your exact question and get a direct, step-by-step answer in seconds — free to try.

Ask Fly Away Free preview · unlimited for PRO members