FSX / P3D scenery

FSX Blairstown Airport Scenery

Blairstown Airport (1N7) scenery brings this private New Jersey GA and glider field to life with satellite-placed buildings, hangars, turf operations areas, and practical ramp parking and fuel spots, tailored for FSX. It aligns object placement to MegaScenery Earth New York 007 and requires common third-party scenery libraries for full detail.

151 downloads 576.17 KB Scanned clean United States of America
Flight Simulator X Prepar3D

Scenery Blairstown Airport (1N7), NJ. Located two miles southwest of Blairstown, New Jersey on 151 acres of land, Blairstown Airport is privately owned by J.D. Air Inc. and is home to a moderate number of small GA planes and gliders. This scenery is not completely up to date, as the MegaScenery Earth textures themselves are outdated. Missing are the added taxiway/parking lot north of the existing north taxiway as well as the second hangar area to the north that it leads to. Parking is available on the south tarmac but if that's all taken there is room just to the west in the taxiway offshoot. Also room on the grass, although stay south of the windsock to avoid interfering with glider operations. Glider pilots that wish to start on the grass, select either Runway East or Runway West. Fuel is available by stopping near the gas tank on the south tarmac. By Drew Sikora.

Located 02 miles SW of Blairstown, New Jersey on 151 acres of land, Blairstown Airport is privately owned by J.D. Air Inc. and is home to a moderate number of small GA planes and gliders. This scenery is not completely up to date, as the MegaScenery Earth textures themselves are outdated. Missing are the added taxiway/parking lot north of the existing north taxiway as well as the second hangar area to the north that it leads to. Parking is available on the south tarmac but if that's all taken there is room just to the west in the taxiway offshoot. Also room on the grass, although stay south of the windsock to avoid interfering with glider operations. Glider pilots that wish to start on the grass, select either Runway East or Runway West. Fuel is available by stopping near the gas tank on the south tarmac.

Scenery constructed with use of satellite images/streetview, the author has not been there in person.

This scenery is meant to be used in conjunction with MegaScenery Earth New York 007. It is not required, but apron use is minimized to allow satellite scenery to show through as much as possible, and objects are placed based on the MSE textures - lack of it may make scenery look out of place.

Airport Remarks:

- Fuel Available: 100LL (blue)
- Wind Indicator: Yes, Lighted
- GLIDERS OPERATE FROM TURF AREA JUST SOUTH OF RWY 07/25.
- TREES IN THE 7:1 TRANSITIONAL AREA ALONG RUNWAY SIDES.
- HILL NORTHEAST OF ARPT MAY RQR PILOTS EXCT STEEP APCH TO RY 25.

Installation:

Unzip the folder 1N7 to wherever you stash your add-on scenery, then activate within the FSX scenery library.

This airport uses the following external scenery objects:

EZ Scenery Objects
RWY 12 Objects
gld_obj1.zip
gld_obj2.zip
GA Hangars SS V3
fs9_custom_objects_ss_1_v2.zip
ezhangers.zip

NOTE: the airport AD2 file in the main 1N7 directory is the Airport Design Editor file for anyone that wants to further tweak the airport.

Disclaimer:

There is no reason installation of this scenery should harm your computer. I will not be held responsible for any damage occured to your computer as result of installing this scenery. Use at your own risk.

Ready to download Blairstown Airport Scenery?

Free for all simmers · 576.17 KB · Scanned clean

File information

Filename
1n7.zip
File size
576.17 KB
Virus scan
Clean (scanned with ClamAV)
Access
Freeware
Content rating
Everyone

Download speed: Free tier is capped at 0.5 Mbps. PRO members download at full line speed.

How to install this mod

FSX / P3D scenery
  1. Extract the downloaded archive

    Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
  2. Place scenery in Addon Scenery

    Create a folder under FSX\Addon Scenery\ containing scenery and texture sub-folders.
  3. Activate in Scenery Library

    In FSX, go to Settings → Scenery Library → Add Area. Higher priority means it overrides lower entries for the same location.
  4. Always read the included readme

    Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.

Finding the scenery

Use these coordinates to fly directly to this location once the mod is installed.

FSX / Prepar3D coordinates (or generate a flight plan)
40.97170000,-74.99740000
Decimal degrees
40.971700°, -74.997400°
Degrees, minutes, seconds
40° 58' 18.120" N 74° 59' 50.640" W

Launch FSX or Prepar3D and use Flights → Load to open the downloaded .pln file. Your aircraft will be positioned at this location.

What’s inside this archive

The archive 1n7.zip has 8 files and directories contained within it.

File Contents

This list displays the first 500 files in the package. If the package has more, you will need to download it to view them.

Filename/Directory File Date File Size
1N710.08.100 B
1N7_ADEX_DS.ad210.08.10575.48 kB
Scenery10.08.100 B
1N7_ADEX_DS.BGL10.08.1036.90 kB
1N7_ADEX_DS_CVX.bgl10.08.10701 B
ReadMe.txt10.08.103.17 kB
flyawaysimulation.txt10.29.13959 B
Go to Fly Away Simulation.url01.22.1652 B

0 comments

Be the first to leave a comment on this download.

Leave a comment

No comments yet

Be the first to share your thoughts on this download.

Leave a comment

Replying to

Used only for your Gravatar avatar — never shown publicly or shared.

Minimum 30 characters 0
Your comment is reviewed by a moderator before publication. Spam, abuse and self-promotion are removed.