FSX / P3D aircraft

FSX SP2 Flight1 Cessna Conquest II Fix

Flight1’s Cessna Conquest II regains fully working co-pilot gauges and radio stack in the virtual cockpit after installing FSX SP2 by correcting the panel.cfg configuration that can leave those displays blank. The package supplies an updated panel.cfg that restores proper VC panel mapping and improves cockpit usability.

238 downloads 5.71 KB Scanned clean

Flight Simulator X Prepar3D

SP2 Flight1 Cessna Conquest II Fix. If you own Flight One's Cessna Conquest II and have installed FSX SP2, you may have noticed that the co-pilot gauges and radio stack are blank in the VC. This is due to a panel.cfg issue with how the VC panels were configured. An updated config file is included here. By Jim Allen.

If you own Flight One's excellent Cessna Conquest II and recently installed FSX SP2, you may have noticed that the Co-Pilot gauges and Radio stack are blank in the VC.

I discovered that this was due to a panel.cfg issue with how the VC panels were configured. I'm not sure why this was not a problem until SP2 however.

Anyway, the fix is to place the updated panel.cfg file to your

Path\simobjects\airplanes\F1_Cessna_441\panel folder. Backup your original to be safe first.

Enjoy

Jim Allen

Ready to download SP2 Flight1 Cessna Conquest II Fix?

Free for all simmers · 5.71 KB · Scanned clean

File information

Filename

f1c441_p.zip

File size

5.71 KB

Virus scan

Clean (scanned with ClamAV)

Access

Freeware

Content rating

Everyone

Download speed: Free tier is capped at 0.5 Mbps. PRO members download at full line speed.

This is a freeware file — use is subject to our freeware copyright terms.

How to install this mod

FSX / P3D aircraft

Extract the downloaded archive

Use 7-Zip (free) or WinRAR to extract the ZIP to a temporary folder. Don't install while still zipped — the simulator can't read inside ZIP files.
Copy aircraft files into SimObjects

Place the aircraft folder inside FSX\SimObjects\Airplanes\. The folder must contain an aircraft.cfg file. Effects go into FSX\Effects\; gauges go into FSX\Gauges\.
Verify in FSX

Launch FSX, go to Free Flight → Select Aircraft and find your new aircraft under its manufacturer.
Always read the included readme

Every mod ships with a readme.txt or README file. It tells you exactly where files go, what dependencies are needed, and any quirks specific to this add-on.