FSX General Aviation Aircraft

Page 25

Filter

Reset

Sort

Grumman AA-5B Tiger

Registration N78KP identifies the AA-5B Tiger variant, tying the model to a real-world aircraft globally. The offering provides only surface assets and requires AA-5BX.ZIP, with the atc_id fixed to N78KP, and Edric Chew is credited.

: 2.62 MB
: 499
: 1

Repaint for Payware Model

PZL-104 Wilga Part 1 Skins Pack

Rafal Stankiewicz / Yoyosims presents three real color variants for a Wilga X payware model from Aerosoft, bearing SP-ECC, SP-ECN, and SP-AGH. The work targets version 1.00 of the model and includes an executable installer for straightforward deployment.

: 28.42 MB
: 498
: 3

Complete with Base Model

Classic Cessna 195

An adaptation of a radial-engine Cessna 195, this variant uses Mike Stone’s design as its base and places authentic cockpit instrumentation in a modernized panel. Mark Rooks of RSDG Aircraft updates exterior details with refreshed surfaces and a white accent, while credits acknowledge Stone and Rooks.

: 9.89 MB
: 497
: 1

Repaint for Payware Model

Piper PA-34 Seneca II HB-LRD

Loic Rais presents a Carenado twin-engine variant with registration HB-LRD, described as a visual modification. It preserves two turbocharged counter-rotating engines delivering 200 hp up to 12,000 ft and a six-seat cabin, while metadata lists Carenado as the indicated manufacturer.

: 3.47 MB
: 486
: 1

Repaint for Payware Model

TAT Cessna C185F Skywagon

Three variants exist for the C185F Skywagon—Wheeled, SKI, and TUNDRA—each bearing the atc_id N1694M for Talkeetna Air Taxi. The archive uses bmp-formatted files labeled TAT, TAT_S, and TAT_T to cover the configurations, and wheeled assets can be adapted to float or amphibian setups.

: 42.77 MB
: 485
: 6

Repaint

Aeroworks ARX-5X Coyote Expansion Pack

This expansion adds 20 color variations for the ARX-5X Coyote, including 12 domestic US and 8 international versions in colors associated with England, Italy, Japan, Switzerland, Brazil, and Finland. It requires the original ARX-5X Coyote v2.1 and ARX5XV21_JT.ZIP, and aliases the remainder to the aircraft.cfg of the base model, by Jason L. Terry.

: 8.32 MB
: 484
: 1

Repaint

CAF DeHavilland DHC-2 Beaver

A CAF variant of the De Havilland DHC-2 Beaver emphasizes rivet detailing and panel framing on a polished metal finish, built on a freeware base from Fly Away Simulation. It requires the original freeware model from Fly Away Simulation and adds a new [fltsim.xx] block in the configuration, with atc_id N9766Z and ui_variation CAF.

: 3.9 MB
: 483
: 5/5
: 3

Repaint for Payware Model

Cessna 206 Stationair ZK-EYM

By B. Lechner, this edition adds true-to-life visual enhancements to the cargo configuration of the Carenado 206 family. A base Carenado payware model is required, and the configuration uses the ZK-EYM registration, located in SIMOBJECTS/AIRPLANES/Carenado Cessna 206 Cargo.

: 8.64 MB
: 479
: 4

Repaint

Cessna 310Q N3364L

The Cessna 310Q with registration N3364L and serial 310Q-0784, delivered in 1973, is presented by Peter Watkins based on Rob Richardson's base model. Peter Watkins adds distinct design elements to replicate the exact look, with markings faithfully representing the original N3364L.

: 9.27 MB
: 476
: 5/5
: 4

Repaint for Payware Model

Rutan 61 Long EZ

An experimental USMC two-tone grey variant of the Long EZ, produced by Rutan, carries the O-235 designation. Compatibility notes refer to a pod configuration labeled ALPHA_LongEZ_o235_pods, and a backup file Rutan61_t8_t.dds is provided to switch to plain grey pods.

: 950.44 KB
: 475
: 2

Repaint

Yellow And Blue Maule 260C

Daniel Wanvig designs a yellow and blue exterior for the Maule M7 260C Orion, aligning with the base Maule model from the Fly Away Simulation library and adding a black powder-coated instrument panel with darker cabin textures. The variant uses atc_id N55001 and carries ui_variation Yellow, blue in its config.

: 3.18 MB
: 474
: 2

Repaint

BAE Systems CT4 Airtrainer Patch

Version 1.1 patches the CT4 Airtrainer with a replacement model file for use alongside BAECT4V1.ZIP, addressing canopy front transparency, belt webbing remaining in the virtual cockpit with no pilot, and flags tied to the canopy flag that lift when the canopy rises.

: 759.89 KB
: 473
: 4/5
: 1

Repaint

French Mudry CAP10B

Samdim Design delivers a Cap 315 variation for the Mudry CAP-10B, with panel work credited to Samdim and a 2007 note attached to the project. Avions Mudry is listed as the manufacturer, while Cap 315 variation and the 315 slot indicate the chosen presentation, and Mike Delizee is named in association with the work.

: 4.33 MB
: 471
: 2

Repaint

USAF DeHavilland DHC-2 Beaver

Henry William delivers a DHC-2 Beaver variant finished in bare alloy with red accents, issued as USAF Metal, and assigned to atc_id N9766Z with ui_type Beaver DHC2 and ui_variation USAF Metal. The cockpit layout and core systems remain faithful to the original airframe, ensuring authentic flight behavior.

: 4.04 MB
: 471
: 3

Repaint for Payware Model

Liberty Aerospace XL-2

Two Liberty XL-2s assigned to Averett University's Aviation Program in 2009 form the basis for two named variants, Averett University No. 1 and Averett University No. 2, bearing registrations N208AU and N207AU. Artwork by Caz Dalton.

: 14.28 MB
: 468
: 7

Repaint

Zlin Z-50 In Hungarian Liveries

Two finishes span five registrations for Tim Conrad's Zlin Z-50LA, with Tibor Kókai credited, and they reflect Hungarian markings. The ZLINZ-50L.ZIP archive hosts these variations and relies on revised visuals described as photoreal imagery, while clearly aligning with the Zlin Z-50LA family.

: 8.06 MB
: 468
: 3

Repaint

Twin Pioneer CF-STX

CF-STX, serial C/N 516, is an ex-EP-AGA and TF-LOA Scottish Aviation Twin Pioneer now stored at the Quesnel Heritage Aircraft Museum. By Peter Watkins, it reflects February 1966 colors and preserves a concise provenance for this airframe.

: 4.64 MB
: 464
: 4

Repaint

Zlin Z-226MS

Tom Tiedman creates a Red N6379W variant of Pavel Karasek’s Zlin Z-226MS, with registration N6379W. The option uses the ui_variation label and includes a [fltsim.X] header with atc_id_enable=1 and atc_id=N6379W. Pavel Karasek is named for the Z-226MS and Tom Tiedman is credited for the red finish.

: 2.39 MB
: 460
: 4

Repaint for Payware Model

Beechcraft Duchess C-GJFE

Beechcraft Duchess C-GJFE adopts the Ottawa Flying Club’s BE-76 colors from one of two BE-76s they own and operate, with the work credited to Matt Dodds, and image assets tied to Just Flight's Beech Duchess.

: 5.91 MB
: 460
: 1

Repaint for Payware Model

Piper Super Cub 'Tiger'

Josef Rotter creates a Tiger variant skin for the Classic Piper Super Cub by Flight Replicas, applying appearance-only changes to the original model. The package requires the payware Piper Super Cub and labels the Tiger option as a named variant within the collection.

: 3.91 MB
: 449
: 5