FSX General Aviation Aircraft

Page 37

Filter

Reset

Sort

CVA Fairchild 24w Float Plane

Gary Moore depicts CVA colors applied to the Lionheart Creations Fairchild 24W radial float model, reflecting CVA branding. The archive cva_LHC_Fairchild_F24w_radial_Float.zip documents the CVA presentation for the 24W float variant, tailored to CVA aircraft colors and identification cues.

: 29.35 MB
: 217
: 5

Repaint for Payware Model

Diamond DA40 Real World Repaint N591CA

Registration N591CA anchors a DA-40 Diamond Star XLS owned by Western Reserve Interiors and based at Cuyahoga in the real world. The model is DA-40 Diamond Star XLS, with Iris's DA40 Diamond Stars as the required baseline.

: 3.4 MB
: 217
: 1

Repaint

Bluegrass Airlines Beech Baron 58

By L. Friese, a Bluegrass variation skins the default Beechcraft Baron 58 with a distinct visual for the twin-engine prop model. It assigns ATC ID BGA and identifies Beechcraft as manufacturer, Baron 58 as type, and Bluegrass as variation.

: 1.34 MB
: 216
: 2

Repaint

Blank Cessna 414 Chancellor

Tom Tiedman provides a blank white exterior option for the Cessna 414A Chancellor, designed to pair with the Premier Aircraft Design model and reflecting the 6-to-8-seat pressurized twin configuration. The aircraft.cfg block for the 414A carries the fltsim label.

: 1.5 MB
: 215
: 3

Repaint

Minnesota State Patrol Cessna 172SP Skyhawk

Two image options exist for the Skyhawk 172SP variant, with registration N4759V, by Tom Tiedman; each option uses 1024 by 1024 or 2048 by 2048 dimensions, saved as 32-bit with no mip maps, ensuring clear presentation.

: 25.38 MB
: 214
: 5

Repaint for Payware Model

A2A J-3 Cub HB-ELI

An HB-ELI variant for the J-3 Cub from A2A carries Swiss registration HB-ELI, ATC ID HB-ELI, and UI variation HB-ELI. It does not include the original payware model, and enthusiasts must already own the A2A Simulations version to use these visuals.

: 5.71 MB
: 214
: 3

Repaint

Extra 300S N300SX

Extra 300S N300SX, by Daniel Wanvig, presents a Blue Flames variation and carries the registration N300SX with a red atc_id_color value. It relies on the base Extra 300S model to operate, with configuration referencing atc_id N300SX and the ui_variation Blue with Flames.

: 1 MB
: 213
: 2

Repaint

Lion Research Centre Cessna 152

A Cessna 152 variant named Lion operates around Seronera in the Serengeti, Tanzania. Just Flight supplies the base model for a freeware Cessna 152, with the jfC152_INSIDER Lion designation shown in the [fltsim] configuration block.

: 3.81 MB
: 213
: 8

Repaint for Payware Model

Piper Cherokee 180 TI-AHQ A2A Payware

Luis Jimenez Trejos of Tico Sim creates this PA-28-180 Cherokee variant carrying the TI-AHQ registration and featuring high-precision rivet lines and panel seam mapping. It integrates with a separate payware Cherokee 180 model, preserving the original flight dynamics while refining exterior details.

: 12.28 MB
: 212
: 3

Repaint for Payware Model

Yellow Devil Vans Aircraft RV-7A

Gregory Mannarelli crafts a single-variant visual for the Vans RV-7A, presenting a Devil option linked to the UI variation devil. The setup adds a fltsim entry titled VansRV7A Tip-Up Devil, with the air file Vans_RV7/vansRV7.air, the model RV7A_tip, the panel RV7A_tip, and the internal identifier NC67591.

: 2.03 MB
: 212
: 4

Repaint

Dart Kitten II Red/White/Blue

Dutch-inspired coloration distinguishes the Kitten II, which features a red, white, and blue color combination, bears the fictional registration PH-4A9, and derives from the original single-seat ultralight design; the named variant is RWB, and the base model is distributed as DART_KITTEN_II.ZIP.

: 8.08 MB
: 212
: 3

Repaint for Payware Model

A2A J-3 Cub

Jeff Trozzo delivers the HB-OTG variant for the Piper J-3 Cub, presenting historically accurate markings suited to the real-world standard. The package requires ownership of the payware Piper J-3 Cub and registers HB-OTG via ATC_ID in the configuration, using a folder labeled HB-OTG within the Piper J-3 Cub directory.

: 6.4 MB
: 211
: 4

Repaint for Payware Model

Cirrus SR22 VH-WCE

By Tristan Ridge, the author presents a fictional SR22G3 Turbo variant VH-WCE with atc_id vh-wce. The VH-WCE designation connects the variant to its atc_id vh-wce while signaling a distinctive identification within the configuration for review and use.

: 2.93 MB
: 210
: 2

Repaint for Payware Model

Beechcraft B58 Baron PR-PVJ

Developer Adelson de Souza Brito Junior delivers a Brazilian-registered PR-PVJ variant for the Beechcraft B58 Baron, designed to pair with the payware Carenado model and to seat up to six. The modification updates the aircraft.cfg with atc_id PR-PVJ and UI variant PR-PVJ, and requires placing visuals alongside existing Carenado B58 assets.

: 3.6 MB
: 209
: 2

Repaint

Cessna 172 G-BCKV

G-BCKV decorates a Cessna 172, with L.T. patchz Davis credited for the work, delivering an authentic civilian finish. The configuration assigns atc_id and ui_variation to G-BOBV in aircraft.cfg, and Service Pack 2 and Acceleration remain compatible.

: 5.79 MB
: 209
: 1

Repaint for Payware Model

Mooney M20J N252Q

Sean Doran presents a single N252Q variation for the Carenado Mooney M20J, attaching the real-world registration to this model. Three modified images accompany the variation, and the base payware Mooney M20J remains a requirement today.

: 2.53 MB
: 208
: 7

Repaint for Payware Model

Vans RV-8 N64PR

Rafal Stankiewicz (yoyosims) presents a Vans RV-8 kit aircraft depiction emphasizing a two-seat tandem layout and conventional gear, aligned with the VS_RV-8 designation. The markings carry U.S. registration N64PR and an ATC ID of N64PR, while the model identifies as RV-8 with a two-blade prop.

: 2.02 MB
: 207
: 4

Repaint

Cessna C-150 F-GJTD

Dedicated surface artwork files for the French VFR/Franckart Cessna 150 variant registered as F-GJTD arrive, by Bertrand Barbe. They depict full external and internal detailing with reworked alpha channels and a seat fabric pattern, aligning with the C150 variant and UI variation F-GJTD PAU LFBP.

: 6.19 MB
: 204
: 1

Repaint for Payware Model

Cessna Cardinal N821KF

Registration N821KF anchors this C177B Cardinal variant, with Michael Mannschreck designing it to integrate with the payware Flight1 Cessna 177B model. This pairing preserves the real-world identity through the N821KF designation and its Flight1 compatibility.

: 4.28 MB
: 204
: 1

Repaint for Payware Model

Cessna C188 AGTruck N5851G

The C188B AGTruck variant carries registration N5851G, with ATC ID color value 0xffff0000, detailing a compact configuration suitable for cataloging purposes and aligning with typical naming conventions used for this aircraft family across simulation catalogs and archives.

: 6.27 MB
: 203
: 6