FS2004 AFCAD Files

AFCAD files are the skeleton of the airport or scenery, for example parking gates and taxiways and holding point information are stored in AFCAD files. These files do not show anything visually, but it's more along the lines of providing information to the simulator software so it may assign runways, parking gates and taxiways for you when you request them via ATC.

Sort

Reset

AFCAD2 Files For Italian Airports

By Marco Miraglia, this lineup covers major Italian hubs, including LIRF, LIMC, and LIPZ, among numerous others such as LIRA, LIRN, LIPR and LIEO. It highlights geographic breadth across Italy, reflecting coverage of airports from Rome and Milan to coastal and island centers.

: 101.34 KB
: 1.3K

AFCAD Pack (Airport Scenery) by Leo Pardon

Leo Pardon presents 96 countries covered and more than 95 individual files that add parking and gates at lesser-known airports worldwide, based on real-world data. The assets are .bgl files compatible with AFCAD 2.04 or later and are not intended to precisely reflect taxiing and parking layouts, but they increase available spaces for AI traffic.

: 4.22 MB
: 6.9K
: 5/5
: 5

AFCAD2 LFPG Paris CDG

RealCDG v3.1 by Xavier Ossedat presents LFPG with 271 gates and four landing runways, complemented by aprons, blue centerline lights, stop lines, hold short lights, a helicopter area, de-icing bays, and new taxiways. The LFPG_2004.BGL file is included for integration.

: 409.82 KB
: 2.7K
: 2

RAF AI Flight Package

Eleven RAF bases in the UK receive parking for a range of aircraft, including F-15 C and E at Lakenheath, KC-135 and MC-130s at Mildenhall, and C-17 and VC-10 at Brize Norton. A readme links to suggested AI airframes and light flight plans for low-end PCs, by Dave O'Brien.

: 187.58 KB
: 908
: 3

AFCAD2 Files For Venezuela Airports

The package adds apron areas, taxiways, helipads, and military parking positions (FAV and ARV) for combat and transport planes, with gates and parking allocated to typical Venezuelan operators and GA. By Daniel Nole, it aligns with Jaime Ortega's and Rafael Useche's layouts and covers SVMI Maiquetia, SVMC Maracaibo, SVPC Puerto Cabello.

: 221.23 KB
: 775
: 1

Tokyo Narita Airport

Narita Airport near Tokyo, RJAA, Japan, presents a layout that is not fully compatible with the default simulator. A file named AF2_RJAA.bgl provides the modification, with taxiways based on Jeppesen charts from 2001 and gates partially omitted to maintain frame rates, while enough remain to handle traffic.

: 332.22 KB
: 944
: 3

Soekarno-Hatta Airport

Rinaldi Hanafi provides a dedicated add-on for Soekarno-Hatta International, Jakarta (WIII), linked to WIII.ZIP content. It covers all parking spaces and assigns airlines to gates, and offers two compatibility formats for different simulator versions, with geographic focus on Indonesia's capital region.

: 202.02 KB
: 753
: 1

AFCAD2 Files For Spain

Barcelona–El Prat gains a brand-new runway 07R/25L, with navaids, taxiways and apron areas published by Aena AIP for all Spain. Airports such as LEMD and LEBL are included, and the work is by Luis de Diego, with SPAI2K4A.ZIP referenced.

: 213.04 KB
: 698
: 1

AFCAD2 Files For European Airports

An assembly by V.F. Holderness covers 32 airports defined by ICAO codes, including LFML, LFPG, and LOWW, with 16 included from a TIME magazine article on Ryanair operations in France. LFBO lacks parking on the Airbus side, LFCR’s grass runway remains closed and unconnected to taxiways, and LIRF updates runway properties to expedite AI traffic.

: 177.39 KB
: 490

Bali Int'l Airport

Rinaldi Hanafi provides a layout file for Ngurah Rai International Airport in Denpasar, Bali (WRRR) intended for DPSNR_50.ZIP, and it includes all parking spaces and assigns airlines to gates as a .bgl component for integration.

: 66.93 KB
: 474
: 1

Patch

SBRJ V2

Version 2 by Luis Phelippe da Silva adds parking-area visuals, helipads, and new lighting enhancements at Santos Dumont Airport in Rio de Janeiro, Brazil. The AF2_SBRJ.bgl file applies the changes to the SBRJ site precisely.

: 4.35 KB
: 442

UK2000 Heathrow

Lee Brompton presents a Heathrow layout for UK2000, built from scratch with the latest CAA charts and aligned to real taxiway names and gate numbers; Runways 9L, 9R, 27L and 27R remain open, 05/23 operates as Taxiway Alpha, and 200 usable parking positions cover terminals, maintenance, hangar and cargo areas.

: 77.95 KB
: 301

SBSP

SkyScene Studio refines gate layouts, taxiway connections, and runway intersections at SBSP Congonhas International in São Paulo, Brazil, using a single .BGL file to mirror real operations and support high-density arrivals and departures during peak hours.

: 5.4 KB
: 289

LFPO Paris Orly

Paris Orly in the default layout gains 107 gates with illuminated centerlines and stop lines, plus a hold-short area, helicopter zone, and a tower viewpoint, while the crossed-wind technique is applied. By Xavier Ossedat, two BGL options exist, one with assigned gates and one without.

: 57.59 KB
: 277

Ramstein AB

The Ramstein AB layout assigns C-130s to Mil_Cargo parking mainly on Ramp 1 and 2, while heavy transports such as C-5, C-141, and KC-135 take Cargo-coded spots on Ramp 5. Fighters use Mil_Combat with six positions, and part of the India taxiway is missing while a second runway is being built, with completion by August 2004.

: 118.22 KB
: 244
: 2

Colombia V1.3

Colombia v1.3 encompasses 103 airports with default aircraft flights across the nation, representing the nationwide coverage. The tower view remains fixed to reach the right altitude, by Alejandro Gomez B, who officially receives credit for this version.

: 324.66 KB
: 178

SYCJ

Karl F. Hajek delivers a freeware adjustment for Cheddi Jagan International Airport, expanding ramp space to support wide-body, cargo, and commuter operations while aligning runway data with official charts, including heading details, length, and lighting aids. The change centers on the AF2_SYCJ.bgl file and improves AI traffic flow at Georgetown.

: 4.8 KB
: 108
: 3/5

KTPA

Richard Mohammed crafts a Tampa International layout refinement that assigns gates and parking to mirror real-world carriers while enabling simultaneous use of multiple runways. The design aligns airport operations with actual traffic patterns, improves taxi routing, and reduces bottlenecks during busy periods.

: 9.32 KB
: 69

EDDF

Frankfurt/Main Airport, Germany, is provided for use with AMEDDF11.ZIP and requires Version 1.1 of AM_EDDF; runways 07L/25R and 07R/25L are open for arrivals and departures. An updated 2D file with embedded traffic coordination features enables AI traffic offline; AM_EDDF_2D.bgl is renamed to AM_EDDV_2D.bgx or removed, and AM_EDDF_2D_AI.bgl is copied to the same folder.

: 35.39 KB
: 1.6K

AFCAD2 Files For Some Greek Airports V1

By V.F. Holderness, the compilation covers twenty Greek airports, including LGAV and LGIR, plus sixteen smaller fields. The files are tidied up and parking maximized without creating new areas, and runways remain unchanged apart from LGAV, with control towers placed near parking areas.

: 43.14 KB
: 1.1K