FS2004 AFCAD Files

AFCAD files are the skeleton of the airport or scenery, for example parking gates and taxiways and holding point information are stored in AFCAD files. These files do not show anything visually, but it's more along the lines of providing information to the simulator software so it may assign runways, parking gates and taxiways for you when you request them via ATC.

Sort

Reset

AFCAD Pack (Airport Scenery) by Leo Pardon

Leo Pardon presents 96 countries covered and more than 95 individual files that add parking and gates at lesser-known airports worldwide, based on real-world data. The assets are .bgl files compatible with AFCAD 2.04 or later and are not intended to precisely reflect taxiing and parking layouts, but they increase available spaces for AI traffic.

: 4.22 MB
: 7K
: 5/5
: 5

Tokyo Narita Airport

Narita Airport near Tokyo, RJAA, Japan, presents a layout that is not fully compatible with the default simulator. A file named AF2_RJAA.bgl provides the modification, with taxiways based on Jeppesen charts from 2001 and gates partially omitted to maintain frame rates, while enough remain to handle traffic.

: 332.22 KB
: 957
: 3

Colombia V1.3

Colombia v1.3 encompasses 103 airports with default aircraft flights across the nation, representing the nationwide coverage. The tower view remains fixed to reach the right altitude, by Alejandro Gomez B, who officially receives credit for this version.

: 324.66 KB
: 189

AFCAD2 Files For Central America

These files, by Jason Diaz, cover Central America and the Caribbean, detailing airports such as Grand Cayman MWCR and Guatemala City MGGT. Airports comprise four reissued locations and nine new ones, with adjusted taxiways, lighting, and runway markings to better reflect real layouts.

: 258.86 KB
: 583
: 3

China AFCAD2 Files

Chinese airport data spans twenty-six identifiers, including VMMC, ZBAA, ZBHH, ZGGG, ZGHA, ZGNN, ZGSZ, ZHCC, ZJHK, ZLLL, ZLXY, ZPPP, ZSFZ, ZSJN, ZSNB, ZSNJ, ZSPD, ZSQD, ZSSS, ZSYT, ZUCK, ZUUU, ZWWW, ZYCC, ZYHB, and ZYTL. Notable codes include ZSPD and ZBAA among others.

: 92.89 KB
: 516

Argentina AFCAD2 Files

The file centers on Argentine and Uruguayan airfields used with Raul Terraz add-on airports, including Ezeiza SAEZ, Aeroparque Jorge Newbery SABE, Don Torcuato SADD, El Calafate SAWC, Mar del Plata SAZM, Ushuaia SAWH, Corrientes SARC, Mendoza SAME, Carrasco SUMU, and Punta del Este SULS. Jorge Soldano Deheza provides authorship.

: 22.01 KB
: 204

Patch

Centrair (RJGG) Fix

By Tetsuji Nakata, this correction for the RJGG facility in AF2JPN_2.ZIP reexamines the Chubu International Airport layout, fixes taxiway linework and lighting, and documents AI aircraft landing and takeoff tests conducted with two PC setups.

: 93.22 KB
: 188
: 2

Johnston Atoll

Johnston Atoll (PJON) gains a runway extension with full approach lighting and expanded south apron, plus parking for aircraft up to B747 size. The package includes a traffic file and a voicepack update for the airport, tied to DBWSims Johnston Atoll project package (DBWJA04.ZIP) by Lee Brompton.

: 10.08 KB
: 67

Perth Int'l Airport

Ray Smith provides a YPPH configuration at Perth International Airport in Australia that adds 33 gates and parking, three helipads, and relies on the AF2_YPPH.bgl file to implement the change for the default airport layout.

: 7.9 KB
: 67

EDDF

Frankfurt/Main Airport, Germany, is provided for use with AMEDDF11.ZIP and requires Version 1.1 of AM_EDDF; runways 07L/25R and 07R/25L are open for arrivals and departures. An updated 2D file with embedded traffic coordination features enables AI traffic offline; AM_EDDF_2D.bgl is renamed to AM_EDDV_2D.bgx or removed, and AM_EDDF_2D_AI.bgl is copied to the same folder.

: 35.39 KB
: 1.6K

RCKH and RCSS

Hyun-wook Hong provides a two-airport layout file covering Taipei Sungshan Airport and Kaohsiung Airport. Hyun-wook Hong centers the project on two-airport coverage and provides a succinct configuration for Taipei Sungshan and Kaohsiung, intended for use with the default visuals.

: 11.5 KB
: 1K

AFCAD2 Files For Venezuela Airports

The package adds apron areas, taxiways, helipads, and military parking positions (FAV and ARV) for combat and transport planes, with gates and parking allocated to typical Venezuelan operators and GA. By Daniel Nole, it aligns with Jaime Ortega's and Rafael Useche's layouts and covers SVMI Maiquetia, SVMC Maracaibo, SVPC Puerto Cabello.

: 221.23 KB
: 794
: 1

Biggest African Airports AFCAD2

Bruno Hamza offers an Africa-wide collection of 29 AFCAD2 files covering airports such as DAAG, DGAA, DIAP, DNMM, DRRN, and HECA, with gates expanded to support traffic AI. Parking codes appear only for HECA (Cairo International), while the remaining entries omit codes.

: 101.05 KB
: 725

AFCAD2 Files For United Kingdom

UK and Irish Airports v1 collection lists Heathrow (EGLL), Gatwick (EGKK), and London City (EGLC) along with Manchester (EGCC) and Edinburgh (EGPH). Created by V.F. Holderness, it provides .bgl files compatible with Afcad 221 or later.

: 140.83 KB
: 639

AFCAD2 Files For The Philippines

Files map to airports such as Camiguin, Butuan, Iloilo, Tacloban, and Manila, with each connecting to a named creator or project, including Ver Walter, Manny, Jeffrey Staehli, Elmer Nasol, and Peter; several files come from PFSG library efforts for Iligan, Pagadian, Dumaguete, Kalibo, Roxas, Davao, and Mactan, while Bacolod remains excluded due to ongoing development.

: 32.73 KB
: 626

Hong Kong Chek Lap Kok

The second Afcad for Hong Kong Chek Lap Kok International Airport (VHHH) adds airline assignments to nearly all gates and parking. Runways 7R/25L close for landing and 7L/25R close for take-off, while dedicated taxiways speed departures and cargo crossing; the arrangement relies on the Hong Kong Chek Lap Kok layout by Thomas Kwong.

: 1014.58 KB
: 476
: 8

EHAM AFCAD2 File

Victor Nauta presents a Schiphol layout file that assigns parking codes to major carriers, such as Air France AFR and Delta DAL, with atc_parking_codes=KLM embedded in Aircraft.cfg. Schiphol uses 36C for departures and 36R for arrivals, and wind conditions may force tailwind landings.

: 177.06 KB
: 387
: 1/5
: 2

AFCAD2 Italy Pack

An Italy-focused assembly delivers AFCAD files for 26 airports, spanning LIBD, LIBR, LIMC, LIRF, and LIRQ. The arrangement emphasizes geographic reach across Italian airfields and anchors with example codes LIMC and LIRF, while noting overall coverage and code continuity for included identifiers.

: 82.44 KB
: 365

AFCAD2 Caribbean/Central America 2004 Vol.1

Volume 1 covers eight Caribbean and Central American airports, including Providenciales International (PLS/MBPV), Belize Philip S. W. Goldson International Airport (BZE/MZBZ), Montego Bay Sangster International (MBJ/MKJS), and Nassau International (NAS/MYNN). Jason Diaz refines gate assignments with generally accurate numbering, improving on the default references.

: 441.01 KB
: 313
: 8

AFCAD2 Files For Austria

This file covers six Austrian airports, including LOWG, LOWI, LOWK, LOWL, LOWS, and LOWW, by Lukas Haselsteiner. Known issues include missing taxiway x at LOWG and unnamed gate positions at LOWI, while other design adjustments reflect chart limitations for LOWK, LOWL, LOWS, and LOWW.

: 141.05 KB
: 305
: 2