FSX General Aviation Aircraft

Page 29

Filter

Reset

Sort

Canadian Beechcraft Baron

Offering a Canadian-themed exterior option for the Beech Baron 58, it uses DDS files and remains compatible with the original Beech Baron 58 included with the simulator. Crafted by William Ortis of Lionheart Creations Ltd., it omits the base model and carries a fictional registration of C-LHCF.

: 2.49 MB
: 338
: 5

Repaint

Cessna 172 N3608L

George V. Trovato delivers an authentic look for the default Cessna 172, registered N3608L and based near KGIF in Florida. It requires the base Cessna 172 installed and provides a folder named N3608L with an atc_id set to N3608L in its aircraft.cfg entry.

: 3.13 MB
: 337
: 6

Repaint

German Yakovlev Yak-18 DM-WBE

By B. Lechner, this DM-WBE variant of the Yak-18 uses era-consistent markings and is built on the SWingman base model. It carries atc_id DM-WBE and remains freeware for personal use, with full functionality dependent on the supplied SWingman model.

: 5.89 MB
: 331
: 2

Repaint

Cessna 310B G-AVZS

G-AVZS carries construction number 35660 and registers in the United Kingdom in December 1967. A landing accident at Elstree in May 1983 writes off the aircraft, and Peter Watkins receives credit for the accompanying work.

: 6.39 MB
: 330
: 4

Repaint

Cessna 172SP 1972 Skyhawk

Canadian-registered 1972 C172L Skyhawk C-FTWE, based at Cold Lake, Alberta, is represented as a Cessna 172SP variant. It offers two size options, 1024 x 1024 and 2048 x 2048, both 32-bit with no mips, named C-FTWE 1024 x 1024 and C-FTWE 2048 x 2048.

: 18.61 MB
: 330
: 4

Complete with Base Model

Cessna 182 Project

Mark Rooks of RSDG leads a modification of a 2004 default Cessna 182 Skylane. The setup lists six core elements—CFG, Airfile, Model, Sound, Panel, Textures—residing in the main aircraft folder, with a Gauges file placed in the gauges folder and textures created from blank bitmap data.

: 12.84 MB
: 330
: 5/5
: 1

Repaint

Orange And White Cessna 172SP Skyhawk

Canadian registered C-ITOH Skyhawk 172SP is depicted with a C-ITOH (DXT3) variation, using 1024-pixel visuals encoded in DXT3 without mipmaps. Tom Tiedman is credited as the creator, and the work targets compatibility with the standard Skyhawk baseline.

: 4.33 MB
: 329
: 4

Repaint for Payware Model

PZL-104 Wilga Part 3 Skins Pack

The set includes two registrations, SP-EZB and SP-CRP, representing Polish clubs Aeroklub Warszawski and Aeroklub Zagrebia Miedziowego, compatible with model version 1.00. Part 3 marks an eight part sequence and credits Rafal Stankiewicz / Yoyosims.

: 21.67 MB
: 328
: 2

Repaint for Payware Model

Piper Pacer PA20 Bush N3615G

Richard Luycx presents a variant of the Piper Pacer PA-20-180 Bush, registered N3615G and named Hell's Gangsters, created for Lionheart Creations Piper TriPacer 180. The UI designation lists Pacer Bush as the type, with Hell's Gangsters as the variation.

: 6.69 MB
: 326
: 6

Repaint for Payware Model

Cessna C337 Skymaster D-GMCM 2013

By Hiroaki Kubota, this White and Glay skin for the C337 Skymaster uses the 2P model and carries the D-GMCM registration, requiring the payware Carenado version. The variation mirrors White and Glay, with a thumbnail file named thumbnail_D-GMCM2.jpg.

: 7.09 MB
: 324
: 2

Repaint for Payware Model

Piper J-3 Cub CF-DCW "Bushwhacker" (Fictional)

Created by Urs Burkhardt, this CF-DCW Bushwhacker variant for the A2A payware J-3 Cub adds four configurations: wheel, tundra, float, and ski. The variation uses atc_id CF-DCW and includes ui_variation CF-DCW Bushwhacker, with dedicated entries in aircraft.cfg under fltsim for each type.

: 24.07 MB
: 323
: 9

Complete with Base Model

Lancair Gold Edition GAP

An enhanced Lancair IV P variant reaches 325 knots and uses revised cockpit layouts with 2D and 3D panels, while Mark Rooks of RDG Aircraft supplies default gauges; Robert Christopher introduced the Legacy 2000 concept in 2004, with revisions adding six components including CFG, Airfile, Model, Sound, Panel, and a visual file.

: 13.89 MB
: 321
: 1

Repaint

German Cessna 172 SP

German Cessna 172 SP presents three variants aligned with registrations D-FCHA, D-FCMU, and D-FCBE. Each version carries a distinct identity Hamburg, Muenchen, and Berlin, with atc_id values D-FCHA, D-FCMU, and D-FCBE.

: 4.93 MB
: 320
: 4

Patch

Piper J-3 Cub Fix

By David Grindele, this fix addresses missing thumbnails for Piper17.zip and includes a modification to the Aircraft config file for the J-3 Cub. Thumbnails reside in their respective folders, and the correction targets the folder named Piper_J3Cub.

: 222.34 KB
: 320
: 17

Repaint for Payware Model

AEAC Cessna C337 Skymaster F-ZAGU

An AEAC variant of the C337 Skymaster carries registration F-ZAGU and serves as a flying testbed for the Flying Test Center from 1983 to 1995. The Carenado payware model accommodates the AEAC variant in French colors.

: 5.06 MB
: 319
: 5

Repaint for Payware Model

13 Pack Texture Set For RealAir Scout

John Cagle and Roland Pohl prepare an update of thirteen finishes for the Decathlon and Scout models, revising them for use with the related versions and noting registrations such as N878AC, DEJKS, and DEFSA, including Barnstormer FSC variants.

: 21.98 MB
: 319
: 40

Patch

Extra 300 Texture Fix

By Andrew McGowin, these files address blurred default visuals of the Extra 300, with the original aircraft credited to Microsoft; two image references, extra-300-texture-fix-fsx1.jpg and extra-300-texture-fix-fsx2.jpg, provide replacements for the prior appearance data and clarify the model's standard presentation.

: 5.44 MB
: 319
: 7

Repaint for Payware Model

Mooney M20J N201J

A Mooney M20J carries registration N201J, with UI variation N201J, illustrating a defined variant tied to a single identification within the lineup. The configuration references atc_id N201J and credits Kevin Michael for authoring the record under the Mooney_Carenado designation.

: 6.87 MB
: 318
: 1

Repaint

Red And White Cessna 152

Two resolution options accompany a red-on-white Cessna 152 bearing fictional registration N2746W, created by Tom Tiedman and updated for compatibility by Mark Rooks. It offers DXT3 1024 and 32-bit 2048 image files, both without mip maps, and requires the Rancho JEN Cessna base model.

: 2.04 MB
: 318
: 3

Repaint

Mooney Acclaim G1000 N988A

An Acclaim Type S variant for the Mooney Bravo bears the N988A registration and features a G1000 glass panel, powered by 280 horsepower and capable of 25,000 feet with cruise near 242 KTAS. The package relies on the default Mooney Bravo model and offers optional cockpit and camera adjustments.

: 7 MB
: 316
: 7