FS2004 AFCAD Files

AFCAD files are the skeleton of the airport or scenery, for example parking gates and taxiways and holding point information are stored in AFCAD files. These files do not show anything visually, but it's more along the lines of providing information to the simulator software so it may assign runways, parking gates and taxiways for you when you request them via ATC.

Sort

Reset

AFCAD Pack (Airport Scenery) by Leo Pardon

Leo Pardon presents 96 countries covered and more than 95 individual files that add parking and gates at lesser-known airports worldwide, based on real-world data. The assets are .bgl files compatible with AFCAD 2.04 or later and are not intended to precisely reflect taxiing and parking layouts, but they increase available spaces for AI traffic.

: 4.22 MB
: 6.9K
: 5/5
: 5

Tokyo Narita Airport

Narita Airport near Tokyo, RJAA, Japan, presents a layout that is not fully compatible with the default simulator. A file named AF2_RJAA.bgl provides the modification, with taxiways based on Jeppesen charts from 2001 and gates partially omitted to maintain frame rates, while enough remain to handle traffic.

: 332.22 KB
: 951
: 3

Marshall Islands

Marshall Islands Intl (PKMJ) gains an extended runway with full approach lighting and a hold point at the 07 end, while parking accommodates B747-sized aircraft and the apron enlarges. A voicepack update adds ATIS and Tower frequencies, with the file AF2_PKMJ intended for the default base setting, by Lee Brompton.

: 4.9 KB
: 79

Schiphol AFCAD2 File V2

John Moerman crafts two BGL files, AF2-EHAM.BGL and AP949130.BGL, that refine gates and taxiways at Amsterdam Schiphol International (EHAM) in the Netherlands. The changes target gate arrangements and taxiway routing to improve aircraft movement across peak hours.

: 364.78 KB
: 790
: 3

MUHA

MUHA, Aeropuerto Internacional Jose Marti in Havana, Cuba, appears here as the reference point for this entry today, linking MUHA_V20.ZIP. The MUHA_V20.ZIP file remains the sole named file for this MUHA site at present today.

: 6.28 KB
: 357

AFCAD2 Files For UK Air Bases

Dan King provides 18 .BGL files that add parking at Boscombe Down, Brize Norton, Coltishall, Coningsby, Cranwell, Kinloss, Lakenheath, Leuchars, Lossiemouth, Lyneham, Marham, Mildenhall, Northolt, Odiham, St Mawgan, Valley, Waddington, and Diego Garcia Navy in the Indian Ocean. The layouts are not accurate.

: 81.47 KB
: 324
: 3/5

AFCAD2 Files For The Netherlands

By Peter Bos, this compilation covers thirteen airports across the Netherlands and nearby Caribbean territories, naming items such as EHAM Schiphol and TNCM Sint-Maarten. Asterisked EHVB Valkenburg Navy stays closed in real life, yet remains usable, with Caribbean locations such as Reina Beatrix Aruba.

: 169.38 KB
: 302

AFCAD2 Files For Western Australia

Comprises Western Australia coverage based on the March 2003 Enroute Supplement, listing airfield identifiers such as YABA, YADD and YAPA among many others, by Dennis Stiglmayer, and requires perth_scenery.zip and ypjt2004.zip for proper integration.

: 96.35 KB
: 195

Kathmandu Tribhuvan

Kathmandu Tribhuvan International in Nepal gains 15 gates, split as 7 GA and 8 international, through the TRIBHVN3.ZIP addition, with gate numbering remaining fictitious while parking positions align with the layout. By Kostis Prassas, the configuration references AF2_VNKT.bgl alongside TRIBHVN3.ZIP.

: 3.19 KB
: 179

SBEG

Manaus hosts a layout file for Eduardo Gomez International Airport identified as SBEG, featuring 12 gates for heavy and medium jets and 10 parkings for general aviation. Runway and taxiway areas, including aprons, receive maximum lighting, and creator Dario F. Finazzi signs the design as AF2_SBEG.

: 172.73 KB
: 115
: 2

AFCAD2 Files For Italian Airports

By Marco Miraglia, this lineup covers major Italian hubs, including LIRF, LIMC, and LIPZ, among numerous others such as LIRA, LIRN, LIPR and LIEO. It highlights geographic breadth across Italy, reflecting coverage of airports from Rome and Milan to coastal and island centers.

: 101.34 KB
: 1.3K

AFCAD2 Files For Some Greek Airports V1

By V.F. Holderness, the compilation covers twenty Greek airports, including LGAV and LGIR, plus sixteen smaller fields. The files are tidied up and parking maximized without creating new areas, and runways remain unchanged apart from LGAV, with control towers placed near parking areas.

: 43.14 KB
: 1.1K

RAF AI Flight Package

Eleven RAF bases in the UK receive parking for a range of aircraft, including F-15 C and E at Lakenheath, KC-135 and MC-130s at Mildenhall, and C-17 and VC-10 at Brize Norton. A readme links to suggested AI airframes and light flight plans for low-end PCs, by Dave O'Brien.

: 187.58 KB
: 918
: 3

AFCAD2 Files For Venezuela Airports

The package adds apron areas, taxiways, helipads, and military parking positions (FAV and ARV) for combat and transport planes, with gates and parking allocated to typical Venezuelan operators and GA. By Daniel Nole, it aligns with Jaime Ortega's and Rafael Useche's layouts and covers SVMI Maiquetia, SVMC Maracaibo, SVPC Puerto Cabello.

: 221.23 KB
: 788
: 1

Biggest African Airports AFCAD2

Bruno Hamza offers an Africa-wide collection of 29 AFCAD2 files covering airports such as DAAG, DGAA, DIAP, DNMM, DRRN, and HECA, with gates expanded to support traffic AI. Parking codes appear only for HECA (Cairo International), while the remaining entries omit codes.

: 101.05 KB
: 719

AFCAD2 Files For United Kingdom

UK and Irish Airports v1 collection lists Heathrow (EGLL), Gatwick (EGKK), and London City (EGLC) along with Manchester (EGCC) and Edinburgh (EGPH). Created by V.F. Holderness, it provides .bgl files compatible with Afcad 221 or later.

: 140.83 KB
: 637

China AFCAD2 Files

Chinese airport data spans twenty-six identifiers, including VMMC, ZBAA, ZBHH, ZGGG, ZGHA, ZGNN, ZGSZ, ZHCC, ZJHK, ZLLL, ZLXY, ZPPP, ZSFZ, ZSJN, ZSNB, ZSNJ, ZSPD, ZSQD, ZSSS, ZSYT, ZUCK, ZUUU, ZWWW, ZYCC, ZYHB, and ZYTL. Notable codes include ZSPD and ZBAA among others.

: 92.89 KB
: 507

Malta Luqa LMML AFCAD2

This LMML-focused AFCAD2 file targets Daniel Chircop's Luqa scenery and also functions with the default airport, adding 18 passenger gates at the main Terminal Park 9, 5 maintenance gates at the maintenance bay, and 15 GA parking at Park 1, by Christoph Rockerath.

: 78.15 KB
: 493
: 4/5
: 1

Patch

Improved AFCAD2 File For EHRD

Rotterdam EHRD in the Netherlands is supported alongside NL2K29S2.ZIP from the NL2000 collection, with parking codes for Transavia, VLM, and KLM Cityhoper and GA spots at Rotterdam Aeroclub. Place AF2_EHRD.BGL in the relevant add-on subfolder; remove or rename AF2NL2K29v1_EHRD.bgl in the NL2000 directory, noting that the old file reappears when using the NL2000 feature panel.

: 160.88 KB
: 450
: 2

AFCAD2 Italy Pack

An Italy-focused assembly delivers AFCAD files for 26 airports, spanning LIBD, LIBR, LIMC, LIRF, and LIRQ. The arrangement emphasizes geographic reach across Italian airfields and anchors with example codes LIMC and LIRF, while noting overall coverage and code continuity for included identifiers.

: 82.44 KB
: 358