FSX Helicopters

Page 6

Filter

Reset

Sort

Italian Navy Bell 212

Two variants for the Bell 212 serve the Italian Navy, MARINA-56 with orange markings and MARINA-33 without, each uses an original Bell 212 airframe and remains compatible with the base model. Bernhard Lechner receives credit.

: 5.92 MB
: 756
: 7

Repaint for Payware Model

"Gronlandsfly" Bell 212

An operator-specific Bell 212 skin targets Gronlandsfly/Greenlandair, carrying the ui_variation GRONLANDSFLY and ui_createdby Cera Simaircraft. B. Lechner is credited as the author, and the modification references the Bell_212 model with a Greenland skin labeled GREENLAND in its configuration.

: 2.89 MB
: 720
: 4

Repaint for Payware Model

Bristow Helicopters Bell 212

By Bernhard Lechner, this Bristow-branded exterior variation for the Bell 212 targets the payware model from Cera Simaircraft and has been tested on SP2 builds. It places Bristow branding on the fuselage and tail, uses a BRISTOW directory within the BELL_212 assets, and adds a ui_variation entry labeled BRISTOW in the aircraft.cfg.

: 3.62 MB
: 717
: 5

Repaint for Payware Model

NSCA Bell UH-1H

An NSCA-themed designation for the Bell UH-1H requires the Nemeth Designs base model to operate and places a NSCA folder into SIMOBJECTS/ROTORCRAFT/ND_UH1H. By Bernhard Lechner, it carries NSCA insignia and designates variant NSCA-05 to reflect Australian safety operations.

: 6.03 MB
: 710
: 5

Repaint for Payware Model

Japan Coast Guard Bell 212

Bernhard Lechner develops a Japan Coast Guard variant for the Bell 212, intended for owners of payware Bell 212 by Cera Simaircraft to achieve authentic exterior. The installer places BELL_212 directory under SIMOBJECTS/ROTORCRAFT and adds a FLTSIM entry in aircraft.cfg with Title Bell 212 JAPAN COAST GUARD and ui_variation JAPAN COAST GUARD, leaving atc_id blank.

: 5.02 MB
: 708
: 4

Repaint for Payware Model

Austrian Air Force Bell UH-1C

Bernhard Lechner creates an AB 204 variant for Austrian air operations, capturing authentic tail flashes and stenciled numbers used by transport and liaison helicopters. Files are organized under SIMOBJECTS/ROTORCRAFT/ND_UH1C with atc_id = 001 and ui_variation = AUSTRIA - 4D-BL.

: 13.38 MB
: 695
: 5

Repaint for Payware Model

Polizei Bayern Bo 105

Polizei Bayern branding presents on the Bo 105, capturing the Bavarian police color layout used in patrol and rescue missions. The variation, named EDELWEISS 2, integrates as a visual replacement for a Nemeth Design Bo 105, featuring twin engines and the Bölkow hingeless rotor, with no flight-model changes.

: 3.08 MB
: 687
: 5

Repaint for Payware Model

King County Sheriff's Office Bell UH-1H

Registered as N71KP, the aircraft serves a Seattle-area sheriff's office and remains in a UH-1D configuration, reflecting its operational role. The variant carries ui_type 205 and a prop_anim_ratio of 1.67, with atc_id N71KP, atc_type Bell, and ui_createdby Specific-3D-Design.

: 13.46 MB
: 684
: 3

Repaint for Payware Model

Bell UH-1D Huey 'N205R'

Tim Scharnhop designs a UH-1D Huey variant registered as N205R for use with a separate add-on and releases AS_HueyX_N205R.ZIP. The installer places a N205R folder in Aerosoft_Bell UH1D, and editing aircraft.cfg adds an [fltsim.XX] entry with atc_id=N205R and ui_variation=N205R.

: 5.71 MB
: 668
: 3

Repaint for Payware Model

"HTG 64 Luftwaffe" Bell UH-1D

B. Lechner designs a German Luftwaffe–styled Bell UH-1D for use with the payware Bell UH-1H from Nemeth Designs & MILVIZ and the Acceleration expansion. The variation LUFTWAFFE places unit insignia and German markings on the ND_UH1H base, arranged under SIMOBJECTS/ROTORCRAFT.

: 3.58 MB
: 667
: 3

Repaint for Payware Model

Corpo Forestale Bell 212

By Bernhard Lechner, a FORESTALE variation for the Bell 212 features an imaginary paint. It requires an original Cera Bell 212 aircraft and places its configuration under SIMOBJECTS/ROTORCRAFT/BELL_212, with the FORESTALE variation clearly labeled here.

: 5.47 MB
: 666
: 5

Repaint for Payware Model

Rettungsflugwacht Bo 105

Bernhard Lechner presents a DRF variant for the Bo 105, named BO105 Dt. Rettungsflugwacht, with a UI variation and ui_type BO-105. It relies on Nemeth Designs’ Bo 105 model and introduces a rescue identity with markings identifying the rescue authority suitable for high-mobility medical missions.

: 3.12 MB
: 658
: 5

Repaint for Payware Model

"THR 30" Bell UH-1D

A THR 30 variant for the Bell UH-1D carries Transporthubschrauberregiment 30 markings from Niederstetten, Germany. By B. Lechner, this work draws on the Nemeth Designs Bell UH-1H payware model and emphasizes precise fuselage markings reflecting German Army identity.

: 4.31 MB
: 641
: 4

Repaint for Payware Model

Air Greenland Bell 212 OY-HCU

Registration OY-HCU anchors a Bell 212 variant associated with Air Greenland, based at Qaqortoq, and Mads Petersen credits the work. It adopts the OY-HCU atc_id and ui_variation HCU-2009, aligning with a single variant focused depiction for the Cerasim Bell 212.

: 2.94 MB
: 623
: 1

Repaint for Payware Model

SAMU Dodosim 206 Helicopter

Registration F-GMHC marks the 206 Low Skid variant, identified by a blue stripe for the SAMU theme and the Dodosim branding. The variation tag F-SAMU3 accompanies the designation, and Dodosim receives sole credit as creator.

: 1.42 MB
: 621
: 1

Repaint

Bell 206 JetRanger Helicopter

Patrick Machabert applies dragon butterfly fuselage markings to the default 206 airframe, with a reference image named b206drbf.gif facilitating the design's presentation. The configuration preserves the original geometry of the airframe while presenting a color motif.

: 4.42 MB
: 617
: 6

Repaint for Payware Model

US Navy Test Pilot School Bell UH-1D

Bernhard Lechner crafts a Bell UH-1D configuration honoring the US Navy Test Pilot School, built on Nemeth Designs’ Bell UH-1H base model. It relies on an [fltsim.XX] entry in aircraft.cfg to apply USNTPS markings, with ui_variation set to USNTPS, and the original payware is required separately.

: 6.9 MB
: 596
: 5

Repaint for Payware Model

German Army/HEER Bell UH-1D

By B. Lechner, this German Army HEER UH-1D variant relies on the Nemeth Designs Bell UH-1H payware model. It uses a folder labeled HEER containing the skin and requires edits to aircraft.cfg to reference ui_type UH-1D and ui_variation HEER.

: 3.67 MB
: 583
: 4

Repaint for Payware Model

US Navy Bell 212

Two variants for a Bell 212 used by the US Navy appear here, credited to Bernhard Lechner. The assets sit in SIMOBJECTS/ROTORCRAFT/BELL_212 as NAVY-01 and NAVY-02, with explicit navy identifiers in the variation labels for quick recognition.

: 4.01 MB
: 581
: 6

Repaint

Bell 206B Jet Ranger III N7359C

Three variants accompany the N7359C registration for the 206B rotorcraft, offering 32-bit 2048-pixel, 32-bit 1024-pixel, and DXT5 with no mipmaps. The setup uses the Bell_206B_JetRanger model, with the N7359C designation appearing across the three variants, and the work is attributed to Tom Tiedman.

: 25.82 MB
: 568
: 3