FSX Helicopters

Page 13

Filter

Reset

Sort

Helicopters NZ Ltd AS350

Daniel McCarthy presents a Helicopters New Zealand Ltd AS350 variant built on the Nemeth Eurocopter AS350 Ecureuil baseline, retaining design cues from ZK-HDN. The work requires the payware Nemeth model, carries atc_id G-LHPL and ui_variation Helicopters New Zealand LTD, with compatibility on older simulators where results vary.

: 3.31 MB
: 547
: 2

Repaint for Payware Model

Auckland Police AS350 B3 'Eagle'

By J. Babich, the Auckland Police Eagle variant applies the color scheme to the AS350 B3, carrying the registration HB-ZIJ. A payware Ecureuil from Heli-Development is required for proper display, with a dedicated EAGLE folder housing the changes and an aircraft.cfg configuration to apply the look.

: 1.42 MB
: 545
: 3

Repaint for Payware Model

Japan Air Self-Defense Force Bell 412

Imagined Bell 412 EP variant appears for the Japanese air defense force, though the service has no Bell helicopters in operation. Bernhard Lechner credits the work, with Dirk Hueschelrath refining the interior color, while the setup relies on the Bell_412_EP model and uses ui_type=412 EP with ui_variation=JASDF and requires an original Cera aircraft.

: 3.88 MB
: 541
: 5

Repaint for Payware Model

Austrian Police Aerospatiale AS350 Ecureuil

An Austrian Police Libelle variant of the AS 350 Ecureuil uses a Nemeth Design base model with markings supplied by Lukas Egger. It uses atc_id OE-OXT and atc_flight_number 3500, and bases include LOWG, LOWW, LOWS, and LOWZ, reflecting its operational geography.

: 4.5 MB
: 540
: 6

Repaint for Payware Model

VIH Cougar Helicopters Bell 212

B. Lechner crafts a Bell 212 appearance for the Cougar Helicopters operator that uses accurate branding and sharp rivet details, reflecting real-world rotorcraft employed for aerial work in remote locations. It integrates with the Cera Bell 212 payware model and does not include the original helicopter files, requiring acquisition of that model.

: 3.11 MB
: 534
: 4

Patch

Bell 212 Main Rotor Fix

Brandon Filer credits accompany a revised main rotor for the Cera Bell 212, enhanced by a redone alpha channel that improves rotation visuals. The file main_rotor is set for replacement, with a backup named 1main_rotor to be kept in the same folder.

: 173.2 KB
: 531
: 1

Repaint for Payware Model

US Air Force Bell 212

Bernhard Lechner delivers a Bell 212 variant bearing a USAIRFORCE designation, implemented via a folder labeled USAIRFORCE inside SIMOBJECTS/ROTORCRAFT/BELL_212. The configuration identifies the model as Bell_212 with a variant number 36, cites manufacturer BELL, and marks the variation field as military designation.

: 4.06 MB
: 527
: 5

Repaint for Payware Model

Pakistan Air Force Bell 212

Created by Bernhard Lechner, this PAF variant for the Bell 212 adds insignia and markings aligned with real-world imagery, using a PAKISTAN designation in the aircraft.cfg. It requires the payware Bell 212 by Cera Simaircraft and the base model, and places the visual under SIMOBJECTS/ROTORCRAFT/BELL_212 with a PAKISTAN entry.

: 2.01 MB
: 515
: 2

Repaint for Payware Model

Heli-Development AS350 B3 'Helilink'

The Helilink option for the Eurocopter AS350B3 Ecureuil appears as a freeware variant created by J. Babich for the payware Heli-Development model. It designates atc_id HB-ZIJ in the aircraft configuration and relies on texture.EAGLE and texture.HELILINK folders for visual changes.

: 1.33 MB
: 504
: 2

Repaint

Bell 206 Blue/Black Textures

A blue-and-black coloring by Jeff Smith updates the default Bell 206 Jetranger, featuring deep blue panels and black sections with subtle shading to reduce color banding around the engine cowling and doors. It requires the base helicopter installed, with the Fly Away Simulation add-on library serving as a typical source for that model.

: 1.47 MB
: 492
: 3

Repaint

Red/Black Robinson R22

Alex James crafts a red and black variation of the Robinson R22 Beta II for the model, credited by the author. The configuration specifies ui_type R22 Beta II and ui_variation Red, Black, while the registered code atc_id is N6092U with an atc_id_color of 0xc6eff7ff.

: 3.14 MB
: 486
: 1

Repaint for Payware Model

RAF Bell 412

An RAF Bell 412 EP Griffin HAR2 variant labeled Royal Rescue, created by Cera Simaircraft and authored by Jeff Trozzo, is provided for the Bell 412 EP. It uses the Royal Rescue designation and ATC ID 3, and requires the original Cera Bell 412 EP model.

: 2.81 MB
: 477
: 5/5
: 3

Repaint for Payware Model

Marines HMM-263 Bell 212

By Bernhard Lechner, a single variant for a Bell 212 assigned to Marine Medium Helicopter Squadron 263 is provided, applying the unit’s markings. It relies on the original Cera Bell 212 aircraft and uses a data directory labeled HMM-263 to organize the files.

: 4.76 MB
: 475
: 3

Repaint for Payware Model

US Navy Bell 412

This record presents a Bell 412 EP variant associated with the US Navy at Naval Air Station Agana, Guam in 1981, and remains fictional beside the UH-1N-1 baseline. It requires an original Cera aircraft to operate, lists atc_id 264, and credits Jeff Trozzo as the contributor.

: 3.12 MB
: 457
: 4

Repaint

French Army (ALAT) Piasecki H-21C

This variant of the Piasecki H-21C carries ALAT markings with 1960 fins roundels, the Army Aviation crest, and a white serial on black. Landing gear relies on custom mdl files to reflect GH2 Sétif modifications, and France operates 108 H-21Cs, stationed at Sétif–Aïn Arnat, with service spanning 1956–1971.

: 2.48 MB
: 452
: 4

Repaint for Payware Model

RAF Bell 412 ZJ237

A Bell 412 EP belonging to the Royal Air Force depicts ZJ237 from Defence Helicopter Flying School, created by Jeff Trozzo and designed to work with a Cera airframe. Visual files reside in the dedicated Bell412_EP folder, and the .cfg data enables the variant.

: 3.01 MB
: 438
: 4

Repaint

Brazilian Bell 206

A Bell 206 JetRanger variant carries a Brazil tribute, with the interior and exterior updated to match a new VC color and seats, by Owen Young. The stock baseline remains intact, while the layout emphasizes the cockpit colors and seating for alignment with the updated virtual cockpit.

: 3.05 MB
: 420
: 3

Repaint for Payware Model

Bundesgrenzschutz UH-1H

Bundesgrenzschutz markings appear on a Nemeth UH-1H Huey, with Bernhard Lechner credited as the creator worldwide. It designates a named variant BGS D-HAQI for Nemeth Designs & MILVIZ, and requires an original Nemeth Design aircraft.

: 6.15 MB
: 419
: 9

Repaint

"Marine SAR" Bristol Sycamore

MARINE-SAR for the Bristol 171 Sycamore reproduces Bundesmarine Marine SAR markings used 1957–1969, with insignia and authentic color tones; the original airframe is Rick Piper’s, while the MARINE-SAR edition is credited to B. Lechner, and retains historic insignia.

: 1.48 MB
: 412
: 3

Repaint

French Bell 206B

By Patrick Machabert, this Bell 206B JetRanger variant presents a French coloring tied to registration F-GVOB. It provides a single variant and uses the default airframe as base, with the F-GVOB registration clearly cited here.

: 4.83 MB
: 409
: 7