FSX General Aviation Aircraft

Page 36

Filter

Reset

Sort

FlyCay Flying Club Cessna 172 Trainer

Guy Dutton creates a club-affiliated variant of the Cessna 172SP, built on the default airframe and offered with DDS image files in a CAY folder. The offering preserves the original avionics and cockpit layout, aligning training flights with a consistent visual identity.

: 1.71 MB
: 216
: 2

Repaint for Payware Model

FSX/SP2 Cessna Stationair N8185Q

By Bob Rivera, this Bush variant for Carenado's U206G appears today. It sits in a folder named N8185Q, and sets atc_id to N8185Q while ui_type remains C U206G Stationair 6 II in aircraft.cfg for the amphibian model.

: 8.38 MB
: 214
: 3

Repaint

Bluegrass Airlines Beech Baron 58

By L. Friese, a Bluegrass variation skins the default Beechcraft Baron 58 with a distinct visual for the twin-engine prop model. It assigns ATC ID BGA and identifies Beechcraft as manufacturer, Baron 58 as type, and Bluegrass as variation.

: 1.34 MB
: 214
: 2

Repaint for Payware Model

Diamond DA40 Real World Repaint N591CA

Registration N591CA anchors a DA-40 Diamond Star XLS owned by Western Reserve Interiors and based at Cuyahoga in the real world. The model is DA-40 Diamond Star XLS, with Iris's DA40 Diamond Stars as the required baseline.

: 3.4 MB
: 212
: 1

Repaint

Minnesota State Patrol Cessna 172SP Skyhawk

Two image options exist for the Skyhawk 172SP variant, with registration N4759V, by Tom Tiedman; each option uses 1024 by 1024 or 2048 by 2048 dimensions, saved as 32-bit with no mip maps, ensuring clear presentation.

: 25.38 MB
: 212
: 5

Repaint

Lion Research Centre Cessna 152

A Cessna 152 variant named Lion operates around Seronera in the Serengeti, Tanzania. Just Flight supplies the base model for a freeware Cessna 152, with the jfC152_INSIDER Lion designation shown in the [fltsim] configuration block.

: 3.81 MB
: 211
: 8

Repaint for Payware Model

A2A J-3 Cub

Jeff Trozzo delivers the HB-OTG variant for the Piper J-3 Cub, presenting historically accurate markings suited to the real-world standard. The package requires ownership of the payware Piper J-3 Cub and registers HB-OTG via ATC_ID in the configuration, using a folder labeled HB-OTG within the Piper J-3 Cub directory.

: 6.4 MB
: 211
: 4

Repaint for Payware Model

Yellow Devil Vans Aircraft RV-7A

Gregory Mannarelli crafts a single-variant visual for the Vans RV-7A, presenting a Devil option linked to the UI variation devil. The setup adds a fltsim entry titled VansRV7A Tip-Up Devil, with the air file Vans_RV7/vansRV7.air, the model RV7A_tip, the panel RV7A_tip, and the internal identifier NC67591.

: 2.03 MB
: 210
: 4

Repaint

Dart Kitten II Red/White/Blue

Dutch-inspired coloration distinguishes the Kitten II, which features a red, white, and blue color combination, bears the fictional registration PH-4A9, and derives from the original single-seat ultralight design; the named variant is RWB, and the base model is distributed as DART_KITTEN_II.ZIP.

: 8.08 MB
: 210
: 3

Repaint for Payware Model

A2A J-3 Cub HB-ELI

An HB-ELI variant for the J-3 Cub from A2A carries Swiss registration HB-ELI, ATC ID HB-ELI, and UI variation HB-ELI. It does not include the original payware model, and enthusiasts must already own the A2A Simulations version to use these visuals.

: 5.71 MB
: 210
: 3

Repaint

Blank Cessna 414 Chancellor

Tom Tiedman provides a blank white exterior option for the Cessna 414A Chancellor, designed to pair with the Premier Aircraft Design model and reflecting the 6-to-8-seat pressurized twin configuration. The aircraft.cfg block for the 414A carries the fltsim label.

: 1.5 MB
: 209
: 3

Repaint

Extra 300S N300SX

Extra 300S N300SX, by Daniel Wanvig, presents a Blue Flames variation and carries the registration N300SX with a red atc_id_color value. It relies on the base Extra 300S model to operate, with configuration referencing atc_id N300SX and the ui_variation Blue with Flames.

: 1 MB
: 208
: 2

Repaint

Castrol Aviator Extra 300S

Daniel Wanvig delivers a Castrol-branded variant of the Extra 300S that preserves the default flight model while emphasizing aerobatic lines. The variant is named Extra 300S Castrol and uses atc_id N821MG with atc_id_color 0xffff0000, requiring the standard Extra 300S baseline.

: 2.22 MB
: 208
: 5

Repaint for Payware Model

Piper Cherokee 180 TI-AHQ A2A Payware

Luis Jimenez Trejos of Tico Sim creates this PA-28-180 Cherokee variant carrying the TI-AHQ registration and featuring high-precision rivet lines and panel seam mapping. It integrates with a separate payware Cherokee 180 model, preserving the original flight dynamics while refining exterior details.

: 12.28 MB
: 206
: 3

Repaint for Payware Model

Vans RV-8 N64PR

Rafal Stankiewicz (yoyosims) presents a Vans RV-8 kit aircraft depiction emphasizing a two-seat tandem layout and conventional gear, aligned with the VS_RV-8 designation. The markings carry U.S. registration N64PR and an ATC ID of N64PR, while the model identifies as RV-8 with a two-blade prop.

: 2.02 MB
: 206
: 4

Repaint

Sounds Air Cessna 172 ZK-EKE

Jon Murchison provides a single-design skin for the default C172SP Skyhawk, registering ZK-EKE with Sounds Air, which serves New Zealand regional routes. It targets the standard model and uses a base package from Fly Away Simulation; the assets live in a dedicated Sounds Air folder and the atc_id equals EKE.

: 694.39 KB
: 206
: 1

Repaint

Cessna 172 G-BCKV

G-BCKV decorates a Cessna 172, with L.T. patchz Davis credited for the work, delivering an authentic civilian finish. The configuration assigns atc_id and ui_variation to G-BOBV in aircraft.cfg, and Service Pack 2 and Acceleration remain compatible.

: 5.79 MB
: 206
: 1

Repaint

Cessna C-150 F-GJTD

Dedicated surface artwork files for the French VFR/Franckart Cessna 150 variant registered as F-GJTD arrive, by Bertrand Barbe. They depict full external and internal detailing with reworked alpha channels and a seat fabric pattern, aligning with the C150 variant and UI variation F-GJTD PAU LFBP.

: 6.19 MB
: 203
: 1

Repaint for Payware Model

Cirrus SR22 VH-WCE

By Tristan Ridge, the author presents a fictional SR22G3 Turbo variant VH-WCE with atc_id vh-wce. The VH-WCE designation connects the variant to its atc_id vh-wce while signaling a distinctive identification within the configuration for review and use.

: 2.93 MB
: 203
: 2

Repaint for Payware Model

Mooney M20J N252Q

Sean Doran presents a single N252Q variation for the Carenado Mooney M20J, attaching the real-world registration to this model. Three modified images accompany the variation, and the base payware Mooney M20J remains a requirement today.

: 2.53 MB
: 202
: 7