Brazil

Scenery Mods for Microsoft Flight Simulator X and Prepar3D

Our current selection of scenery mods and expansions covering Brazil for Microsoft Flight Simulator X and Prepar3D. Completely free to download and use - no registration required. Updated regularly - bookmark to stay up to date.

Sort

Reset

Guararapes-Gilberto Freyre

Recife’s Guararapes–Gilberto Freyre Intl (SBRF) v2 drops a finely-scaled AFCAD with accurate parking codes, photoreal aprons, custom jetways, dynamic night lighting, and updated ILS alignment for runway 18/36—an efficient Brazil-northeast hub upgrade for Microsoft Flight Simulator X users seeking realistic SID/STAR compatibility without heavy FPS cost.

: 7.14 MB
: 2.7K
: 5/5
: 2

Galeao-Antonio C Jobim International Airport

Rio’s SBGL layout for FSX gains reassigned gates, full AI-compatible crosswind runway logic, corrected taxi-hold markings, additional fuel bowsers, and updated service roads, packaged as two selectable BGL variants plus an objects library—delivering smoother traffic patterns and realistic ground handling at Galeão–Antonio Carlos Jobim International Airport.

: 53.51 KB
: 3.3K
: 5/5

SBGR

Guarulhos International (SBGR) gains a refreshed AFCAD by Ray Smith that injects additional gate allotments, corrected taxiway links and dedicated service-road nodes, giving FSX users in the Brazil scenery index an up-to-date parking matrix for heavy and regional traffic while keeping AI flow and fuel truck dispatches aligned with current airport charts.

: 578.07 KB
: 3.3K
: 5/5
: 3

Maceio Int'l Airport

Covering Zumbi dos Palmares—ICAO SBMO—this FSX scenery refreshes apron layout, georeferenced taxiway markings, updated AFCAD parking codes, VASI/PAPI alignment and custom night textures, offering a reliable reference for Brazilian domestic and international route planning across northeastern FIRs while retaining optimized performance for high-traffic virtual airline operations.

: 1.98 MB
: 2.9K
: 5/5
: 7

Belem Airport

Gustavo Luna’s freeware scenery add-on v2.0 brings SBBE Val de Cans–Belém International to FSX with revised AFCAD, accurate runway 06/24 geometry, calibrated ILS, geo-referenced taxiway signage, GMAX-built terminals, photoreal ground polys and balanced night lighting, framing approaches over the Amazon River delta for realistic Brazil regional ops.

: 2.36 MB
: 2.4K
: 4/5
: 3

Uberlandia City - SRTM Meshes Correction

Built for Microsoft Flight Simulator X and FSX:SE, this Uberlândia—SBUL terrain fix replaces default SRTM mesh with a purpose-made flatten and updated APX35380.BGL, aligning runway elevation, apron gradients and nearby landclass to authentic survey data; an essential Brazil scenery download for stable taxi performance and realistic approach geometry.

: 7.28 KB
: 843
: 2/5

Photoreal Ribeirao Preto

FSX Photoreal Ribeirão Preto adds accurate orthoimagery, refined autogen footprints and custom 3-D models to the Brazilian agricultural hub in São Paulo state, delivering believable VFR circuits around SBRP, industrial parks and downtown landmarks while maintaining frame-rate efficiency, all compiled by Paulo Ricardo and Felipe Bachian as freeware.

: 59.02 MB
: 3.2K
: 3/5

Teresina Airport

FSX rendition of Teresina-SBTE, Brazil, provides updated AFCAD, accurate taxiway and runway markings, revised hold-short lighting, detailed apron textures showing surface wear, plus custom night FX files for balanced illumination; a lightweight, freeware scenery designed by Gustavo Luna that integrates smoothly with Microsoft Flight Simulator X without noticeable frame-rate penalty.

: 1.47 MB
: 1.9K
: 1/5
: 2

Palmas Airport

FSX users can load a faithful rendition of Palmas–Brigadeiro Lysias Rodrigues Airport (SBPJ) in Tocantins, Brazil, featuring precise taxiway sign placement, upgraded apron and ground textures, static and animated ramp elements, and balanced performance—ideal for regional jet or GA route planning within your Microsoft Flight Simulator X scenery library.

: 1.14 MB
: 772
: 1/5
: 8

Caldas Novas Airport

FSX-exclusive Caldas Novas Airport SBCN adds a precise Brazilian regional airfield with updated ramp light arrays, default-asset construction and the real 3.42° RNP/GNSS approach aligned to a 3.27° PAPI, supporting routine 737 and A320 traffic. Built from Jeppesen charts, DECEA data, Google Earth and on-site imagery for seamless inclusion in any Brazil scenery portfolio.

: 4.05 MB
: 638
: 5

Hotel Transamerica Airport

Adds Hotel Transamerica Airport (SBTC) in Una plus nearby Pôções airfield (SNZP) to Microsoft Flight Simulator X, supplying detailed taxiways, paved aprons, gate stands, and default library structures positioned with Instant Scenery and Airport Facilitator X— a freeware, Brazil-centric upgrade for sim pilots navigating Bahia’s general-aviation network.

: 4.89 KB
: 565

Macapa 2005 Airport

Flight Simulator X pilots charting routes across Brazil can slot in this Macapá 2005 SBMQ scenery upgrade; the freeware add-on supplies corrected AFCAD geometry, photoreal ground textures, custom taxiway signs, PAPI calibration and night lighting, matching the Amazon-river airport’s 08/26 asphalt layout with minimal frame-rate impact.

: 1.23 MB
: 564
: 1/5
: 4

Itanhaem Airports

Targeting Flight Simulator X pilots flying Brazil’s litoral, Itanhaem Airports v2.0 slots SDIM and SDCR aerodrome layouts into São Paulo’s coastal mesh, adding accurate asphalt runways, marked taxiways, GA parking stands, and custom terminal structures that align precisely with Project Mesh X elevation data.

: 145.23 KB
: 415
: 1/5
: 4

Cachimbo Air Base

Cachimbo Air Base SBCC plants a faithful Brazilian Air Force support hub in FSX, positioning a 2,602 m runway amid Pará’s Serra do Cachimbo rainforest. Custom buildings, accurate AFCAD, refined landclass, night lighting and upgraded mesh provide a solid stage for tactical transport runs and low-altitude Amazon navigation practice.

: 8.39 MB
: 364
: 2

Sinop Airport

Covering Sinop Airport (SWSI) in northern Mato Grosso, this FSX scenery add-on refreshes terminal geometry, apron markings, taxi-link logic, custom night lighting and photoreal ground polys, giving Brazil-bound virtual pilots accurate parking, GA ramps and navaid alignment when running IFR or VFR circuits over the Cerrado region.

: 11 KB
: 154

Eduardo Gomes Airport

This FSX flight-sim add-on refreshes Eduardo Gomes International (SBEG) in Manaus with satellite-derived photoreal ground textures, accurate runway and taxiway geometry, custom landclass, refined Amazon basin shoreline and subtle night lighting, compiled in SBuilderX from Virtual Earth data—useful for VFR circuit training, IFR cargo schedules and regional bush flying across northern Brazil.

: 35.1 MB
: 2.9K
: 4/5
: 7

Boa Vista Int'l Airport

Update Boa Vista International Airport (SBBV) for Microsoft Flight Simulator X with geo-referenced ground imagery, corrected AFCAD, native gMAX buildings, realistic night lighting and optimized autogen matching the Roraima savannah; includes accurate stand numbering, SID/STAR-ready navaids and AI traffic compatibility for seamless VFR or IFR hops across northern Brazil.

: 2.42 MB
: 1.8K
: 3/5
: 3

Salvador Fotoreal

Covering Salvador, Bahia and the environs of Deputado Luís Eduardo Magalhães International (SBSV), this FSX add-on layers high-resolution Virtual Earth photoreal textures created in SBuilderX over the coastal terrain, refining city skylines, reefs, mangroves and runway environs for IFR and VFR flyers seeking accurate beaches, approach visual cues and Brazilian atmosphere and culture.

: 57.67 MB
: 1.5K
: 5/5
: 5

Jundiai

Covering the busy Jundiaí Airfield (SDJD) near São Paulo, this FSX v2.0 scenery refresh adjusts field elevation to match real-world charts, refines threshold markings, extends the AFCAD with extra GA parking and updated taxiway designators, and integrates custom apron lighting for smoother night operations; the package is tuned for default FSX landclass and high-resolution mesh terrain.

: 114.17 KB
: 1.5K
: 1/5
: 2

Americana Photo Realistic

High-resolution orthoimagery covers Americana’s city grid, industrial parks, and surrounding sugar-cane fields in São Paulo, Brazil, supplying 7 cm satellite textures over a 2 m terrain mesh for Microsoft Flight Simulator X; perfect for VFR hops between Campinas and SDAI Aeroclube, this add-on blends with default landclass while keeping frame rates steady.

: 183.89 MB
: 1.5K