France

Page 5

Sort

Reset

Eyguieres/Salon Airport

Short-field VFR flyers will appreciate this FSX flight-sim scenery for Eyguieres-Salon Airport LFNE, a grass-surface aerodrome in Provence near Istres and Salon-de-Provence. The package adds dual turf runways, glider launch strip, tower operations, assorted hangars and surrounding Alpilles reference points, enriching Microsoft Flight Simulator X coverage of southern France.

: 787.74 KB
: 393
: 3

Chateau Thierry

This FSX add-on refreshes France’s LFFH Château-Thierry Belleau with 1 m/px photoreal ground textures, geo-referenced runway 04/22 markings, seasonal colouration, night lighting and dense custom autogen, providing VFR pilots authentic terrain cues across the Marne valley and Champagne-Picardie region without taxing frame rates.

: 33.66 MB
: 388
: 5/5
: 2

Royan Medis Airport

Royan-Médis Airport (LFCY) scenery add-on for Microsoft Flight Simulator X brings this Charente-Maritime coastal airfield to the sim with photoreal ground polygons, GMAX-built hangars, custom night lighting, ambient environment audio and FPS-friendly optimization—useful for VFR circuits, DR400 training flights and low-level coastal navigation.

: 14.92 MB
: 366
: 1/5

Barre des Ecrins

Covering the Barre des Écrins summit—the loftiest peak in France’s Massif des Écrins—this FSX add-on delivers high-resolution photoreal terrain, sharp DEM mesh and glacier textures for precise VFR navigation across the French Alps; authored by Frank Dainese, it complements regional France scenery libraries and default landclass.

: 215.43 MB
: 334

LFRD

Dinard–Pleurtuit–Saint-Malo LFRD for Microsoft Flight Simulator X and Prepar3D refreshes this Brittany airfield with corrected ILS, VOR and ATIS frequencies, precise runway and threshold data, authentic taxiway nomenclature, extra GA and commuter parking stands, and an optimised AFCAD compiled via Airport Design Editor 1.78 for smoother AI traffic flow.

: 3.03 MB
: 315
: 1

LFGS - Longuyon-Villette

Covering Longuyon-Villette LFGS in Meurthe-et-Moselle 54, this FSX scenery deploys custom GMAX structures, aligned autogen, and high-res ortho imagery to depict the Les Frontières Lorraines flying club and ASCPV54 model field, offering fluid GA circuits and convenient positioning for Belgium–Luxembourg border hops.

: 18.85 MB
: 299

Dax Seyresse

Covering the Aquitaine town’s GA hub, this freeware rebuild of Dax Seyresse Airport (LFBY) for Microsoft Flight Simulator X SP2/Acceleration aligns runway data, taxiway geometry and elevation with current charts, adds custom 3-D hangars, photoreal ground textures and matching landclass, and supports UTX Europe for smooth VFR transitions across south-west France.

: 7.43 MB
: 297

Millau Viaduct Patch

This FSX patch refines the Millau Viaduct landmark in southern France by removing the default duplicate span and realigning deck elevation for accurate shadow casting; three variants cover users running France VFR mesh, UTX Europe, or default terrain, ensuring seamless VFR navigation over the Tarn valley on both boxed and Steam editions.

: 11.75 KB
: 286

Pic St Loup Airport

Adding the often-overlooked LFNL Pic Saint-Loup glider strip to Microsoft Flight Simulator X, this scenery supplies an up-to-date AFCAD, corrected landclass, grass runway elevation profile, clubhouse assets, and the distinctive ridge line north of Montpellier—offering accurate reference points for VFR soaring in southern France while keeping frame-rate impact minimal.

: 765.37 KB
: 285
: 3

Scenery Of Airfield LFFT Neuchateau

Covering the overlooked LFFT Neuchâteau grass strip in northeastern France, this FSX scenery add-on replaces default terrain with hi-resolution photoreal ground imagery (seasonal and nocturnal variants), specular-mapped hangars, animated windsock, static GA traffic, custom landclass out to roughly 10 nm, plus regional landmarks such as telecom masts and a police compound—well suited to low-level VFR circuits without runway lighting.

: 9.55 MB
: 274
: 1/5

Fontenay le Comte

Fontenay-le-Comte LFFK airstrip in south Vendée offers an asphalt runway alongside the original turf strip, plus FBO apron, nearby karting track and R/C model zone, all built with default FSX libraries to keep frames steady. Great for VFR hops, touch-and-go practice and GA ops around western France. Authored by Dominique Donzelot, this freeware scenery slots smoothly into any add-on library.

: 977.87 KB
: 270
: 3/5
: 3

France Domaine de la Boissiere

Quiet 550-m grass runway of Domaine de la Boissière in Vendée brings west-coast France to Microsoft Flight Simulator X; this GA-only private strip, roughly 15 NM north of Les Sables-d’Olonne (FSOO), offers a discreet 108 MHz ADF beacon and default-asset scenery for minimal FPS overhead, authored by Dominique Donzelot.

: 931.57 KB
: 270
: 7

Besancon Thise Photographic

LFSA Besançon-Thise photoreal add-on brings 30 cm satellite textures, custom-placed stock autogen and accurate grass runways to this glider, ULM and GA strip at the foot of the Doubs highlands near the French-Swiss border, offering VFR fliers in FSX a crisp Jura Mountains reference without notable FPS penalty.

: 11.67 MB
: 268
: 3

La Tranche Sur Mer

This FSX scenery recreates La Tranche-sur-Mer (ACLT) aerodrome in southern Vendée on France’s Atlantic coast, layering photoreal shoreline, grass strip sited on reclaimed marshland, nearby seaside townscape and default-library assets that keep frame rates stable—suited to VFR circuits, general-aviation pattern work, ultralight hops and coastal cross-country legs to Île de Ré.

: 781.39 KB
: 264
: 7

Optional Textures For Clemenceau

This texture set for the French Navy’s Clemenceau carrier supplies alternative 2048×2048 or 1024×1024 DDS flight-deck maps, with optional MIP-mapped editions, curbing shimmer, boosting load times and reducing GPU memory demand for performance optimisation in Microsoft Flight Simulator X (FSX) while operating the moving carrier scenery in naval aviation sessions.

: 19.52 MB
: 264
: 1

LFNV Airstrip

LFNV Airstrip scenery for Microsoft Flight Simulator X positions a rural GA strip within l'Enclave des Papes, Provence, placing your Cessna or Pipistrel between vineyard rows and mature olive groves, offering realistic ground textures, accurate elevation data, AFCAD parking and VFR-friendly landmarks for low-level navigation across southern France.

: 14.32 MB
: 263

Itxassou

FSX Itxassou (LFIX) scenery add-on v1.0 slots a compact Basque Country grass strip into the Aquitaine terrain, blending ADE-baked runways, custom taxiways and SBuilderX-derived landclass with SP2 Acceleration and UTX Europe layers—ideal for VFR hops, short-field GA practice and low-level Pyrenees sightseeing across southwestern France.

: 1.63 MB
: 256
: 1

Mimizan

LFCZ Mimizan adds the small Aquitaine coastal aerodrome to Flight Simulator X SP2/Acceleration, blending with UTX Europe terrain; an ADE-refined AFCAD, geo-referenced ground polys, and Whisplacer scenery objects recreate runway 09/27, taxiways and hangars for low-level VFR, bush and general-aviation sorties along the Landes shoreline.

: 4.62 MB
: 247

Neuchateau LFFT Scenery Patch

Targeting FSX pilots flying within France, this Neuchâteau LFFT patch swaps the main BGL to resolve runway-end shadow glitches, eliminates overgrown tree objects, and brings cleaner approaches for VFR patterns; designed for lfft_fsx.zip, the update refines ground poly rendering without altering native performance or navigation data.

: 266.51 KB
: 244
: 1/5

Fromentine-Beauvoir

Serving light GA traffic, the private Fromentine-Beauvoir strip (LF8561) sits on reclaimed marshland between Fromentine and Beauvoir-sur-Mer, Vendée, opposite Île de Noirmoutier along France’s Atlantic seaboard; this FSX scenery upgrade layers accurate runway turf, custom hangars, tidal wetlands autogen, and regional photoreal textures aimed at low-level VFR touring.

: 20.63 MB
: 240
: 4/5
: 21