Italy

Scenery Mods for Microsoft Flight Simulator X and Prepar3D

Our current selection of scenery mods and expansions covering Italy for Microsoft Flight Simulator X and Prepar3D. Completely free to download and use - no registration required. Updated regularly - bookmark to stay up to date.

Sort

Reset

Milan Malpensa Airport

Pilots can retrofit Italian Scenery Design’s cherished FS2004 LIMC Milan-Malpensa package for FSX, with patched BGLs that correct ground polygons, revive AI traffic, and supply an updated AFCAD covering gates, cargo stands and taxi routes, preserving original photoreal terminals for reliable VFR and IFR legs across northern Italy.

: 361.58 KB
: 7.1K
: 2

Fiumicino International Airport

Rome’s main international gateway sees an ADE v1.37 AFCAD rebuild for FSX default, offering optional crosswind runway activation, fixed 34C hold-shorts, expanded GA and heavy stands, rebuilt airside service roads, cargo-area floodlighting, updated taxiway signage and additional fuel trucks—delivering LIRF Fiumicino accurate apron geometry, tower-view spots and orderly ATC sequencing.

: 4.32 MB
: 6.5K
: 4/5
: 23

Sardinia Complete Photoreal

Sized for FSX and Prepar3D, this all-in-one Sardinia photoreal layer draws 1-m orthoimagery from calibrated satellite data, blankets Gallura, Ogliastra, Campidano and the Maddalena archipelago, applies water masks, includes selective autogen at LIEA/LIEE and precise runway geo-referencing at LIEO, LIER and auxiliary strips for realistic VFR legs.

: 4.74 GB
: 5.1K
: 5/5
: 24

Pompeii Italy

Covering Pompeii, Herculaneum, and the looming cone of Vesuvius, this FSX scenery integrates sixteen licensed 3-D archaeological structures, high-resolution photoreal ground textures, precise coastline alignment, and custom terrain mesh for the Bay of Naples, providing IFR/VFR pilots with accurate visual cues during approach to LIRN Naples-Capodichino.

: 315.08 MB
: 2.8K
: 5/5
: 12

Orio al Serio

Orio al Serio (LIME) for FSX refreshes the Bergamo low-cost hub with revised AFCAD layout, accurate Jeppesen-based taxiway geometry, correct gate numbering, custom airside clutter and CVX flattens, delivering seamless AI integration for WOAI, UGA or AIG traffic across Lombardy’s busy Milan flight operations.

: 382.54 KB
: 1.6K
: 1

Naples Capodichino Scenery V2

Napoli Capodichino LIRN-X v0.2 refines Italy’s southern gateway for FSX/Acceleration, adding a levelled terrain poly, fresh AFCAD with gates 31–33, accurate INPL-tagged ILS, widened 25 nm visibility, object excludes and tidied Atitech structures—delivering smoother frame-time and an airport diagram that matches current AIP charts for domestic and Euro-Med traffic.

: 13.8 MB
: 5.6K
: 4/5
: 3

Olbia Airport

Olbia Airport (LIEO) scenery for Italy’s regional index revamps the FSX default field using ADE v1.45 tweaks: usable jet bridges at Terminal 1, freshly plotted Apron 2, re-profiled Apron 3, an ILS RWY 24 dialed to 111.30 MHz, and a fire-service ramp featuring trucks and static rotorcraft.

: 8.93 KB
: 1.2K

Lamezia Terme International Airport

This Microsoft Flight Simulator X add-on updates LICA Lamezia Terme International Airport in Calabria using an ADE 9-compiled AFCAD, matching 2010 Google Earth data to refine runway geometry, taxiway links, apron edge lines and parking positions, supplying regional flyers accurate navaid placement and stand numbers for reliable IFR and VFR planning.

: 74.15 KB
: 1.2K
: 1/5
: 1

NAS Sigonella

NAS Sigonella (LICZ), situated on Sicily’s eastern plain, is replicated for FSX with the runways shifted 550 ft north, realigned headings, complete taxiway network, plus Villaggio NATO and Marinai housing areas rendered from geo-referenced overlays. Custom SketchUp structures, night textures and an optional 108.55 MHz east-approach ILS deliver a pragmatic NATO base environment for Microsoft Flight Simulator X flyers.

: 4.79 MB
: 1.1K
: 2/5
: 14

Italy Regionspack

Covering the Apennines to the Alpine arc, FSX Italy Regionspack refreshes Microsoft Flight Simulator X with revised landclass, enhanced autogen density, accurate coastlines and adjusted desert-bug textures, transforming peninsular and insular Italy plus adjacent microstates for reliable VFR legs and smooth frame-rate-friendly IFR approaches.

: 193.31 KB
: 4.7K
: 5/5
: 2

Venice Tessera Int'l Airport

FSX rendition of Venice Marco Polo Airport LIPZ refreshes the default scenery using current Jeppesen and AIP Italy data: RWY 4L/22R becomes the primary taxiway, CAT III RWY 4R/22L holding positions moved, 3-degree PAPI installed, updated ALS, enlarged runway strips, accurate stand codes and SID-aligned traffic flow, all compiled in an AFCAD for Microsoft Flight Simulator X.

: 304.71 KB
: 3.3K
: 5/5
: 1

Italy

Spanning Milan, Rome, Naples, and down to Palermo, this scenery add-on for Microsoft Flight Simulator X places 12 hop-list Italian airports plus the Maltese island strip into the sim, using stock asset libraries to maintain high FPS. VFR and IFR routes gain updated waypoints, runway data, and coastal reference points; authored by J.D. Starseed.

: 632.62 KB
: 2.9K
: 5/5

LIRF Update

Rome’s LIRF – Leonardo da Vinci / Fiumicino – receives a re-drawn AFCAD for Microsoft Flight Simulator X, delivering geo-referenced taxiways, corrected ILS positions, refined gate assignments for realistic AI traffic flow, an expanded Terminal 3 sized for A380 operations, plus an optional three-runway crosswind setup synchronized with current AIP navigation data.

: 578.79 KB
: 2.7K
: 5/5
: 3

LIPB - Bolzano

Covering LIPB Bolzano in South Tyrol, this AIG AFCAD rebuild aligns aprons, taxiways and parking for FSX and FS2004, adds heli pads for Esercito, Polizia and Guardia di Finanza, supports Air Alps Dornier 328 schedules, refines tower frequency, introduces custom CVX vectors, extra GA stands and smoother AI ground flow.

: 110.12 KB
: 1.9K
: 1

Sicily Version I

FSX Sicily Version I renders 104 Sicilian municipalities with custom coastlines, five paved airports, two secondary aerodromes and detailed Mediterranean harbours, pairing region-specific autogen and terraformed mesh for smoother VFR hops, realistic approaches and low-level sightseeing across Palermo, Catania, Syracuse and surrounding coastal terrain.

: 19.42 MB
: 1.9K
: 4/5
: 6

Dolomiti

Covering the Dolomiti stretch of Italy’s Alpine arc, this FSX add-on delivers photoreal mesh and high-resolution texture mapping for Antelao, Croda Rossa, Tre Cime di Lavaredo, Pelmo, Sassolungo and the Tofane above Cortina d’Ampezzo, using advanced perspective projection to retain sheer cliff fidelity in the simulator.

: 77.37 MB
: 1.4K
: 1

ADE File For LIRL

Emiliano Matterazzo's ADE v1.0 scenery enhancement redraws LIRL Latina “E. Comani” Airport for Microsoft Flight Simulator X SP2, supplying an AFCAD upgrade with accurate runway 12/30 thresholds, revised taxiway links, corrected parking spots, updated tower/APP frequencies, refined navigation aids and proper CVX flattens, giving GA pilots and military trainers a realistic central-Italy base for circuit work.

: 218.22 KB
: 457
: 3

Palermo Punta Raisi Airport

Punta Raisi LICJ v2.0 brings a precise FSX rendition of Palermo’s Falcone-Borsellino hub, featuring the updated passenger terminal, calibrated AFCAD, crosswind runway coding, animated jetways, comprehensive ground service equipment, photoreal aprons, custom night lighting and verified navaids for both IFR and coastal VFR sorties across western Sicily.

: 25.4 MB
: 3.2K
: 21

Catania Fontanarossa Airport

Designed by Antonio Baeli for Microsoft Flight Simulator X, this scenery pack refreshes Catania Fontanarossa Airport LICC in Sicily with high-resolution ground poly, revised taxiway coding, SID/STAR-compliant AFCAD, bespoke night lighting and precise stand positions, providing Italian domestic and Mediterranean IFR operations an up-to-date hub without excess performance overhead.

: 5.04 MB
: 3.1K
: 1/5

Rome Ciampino Airport

Serving as Rome’s secondary hub, Ciampino Airport (LIRA) arrives in FSX with an accurate AFCAD layout, custom aprons, aligned taxiways, and photoreal ground polys derived from high-resolution Google Earth imagery; compiled through ADE X, the add-on meshes smoothly with Italian peninsula photo scenery and preserves existing navaids, parking codes, and ILS data.

: 70.33 KB
: 2.4K
: 4/5
: 1