FSX Helicopters

Page 11

Filter

Reset

Sort

"HTG 64 Luftwaffe" Bell UH-1D

B. Lechner designs a German Luftwaffe–styled Bell UH-1D for use with the payware Bell UH-1H from Nemeth Designs & MILVIZ and the Acceleration expansion. The variation LUFTWAFFE places unit insignia and German markings on the ND_UH1H base, arranged under SIMOBJECTS/ROTORCRAFT.

: 3.58 MB
: 664
: 3

Repaint for Payware Model

Bell UH-1D Huey 'N205R'

Tim Scharnhop designs a UH-1D Huey variant registered as N205R for use with a separate add-on and releases AS_HueyX_N205R.ZIP. The installer places a N205R folder in Aerosoft_Bell UH1D, and editing aircraft.cfg adds an [fltsim.XX] entry with atc_id=N205R and ui_variation=N205R.

: 5.71 MB
: 663
: 3

Repaint for Payware Model

Royal Australian Air Force Bell UH-1H

Bernhard Lechner presents a RAAF-marked Bell UH-1H variant built on Nemeth Design's base for rotorcraft models, featuring authentic markings and a dedicated in-code identity. The configuration resides in SIMOBJECTS/ROTORCRAFT/ND_UH1H and credits Bernhard Lechner as creator.

: 4.17 MB
: 662
: 5

Repaint

FBI Bell JetRanger 206B

An FBI variant of the JetRanger lineage emerges, derived from the DH4 FBI helicopter seen in Die Hard 4 and based on the Bell_206B_JetRanger model. It bears an FBI designation with the Federal ATC ID and is listed as FBI (DH4 edited) with credits to Simran Grewal.

: 2.33 MB
: 647
: 1

Repaint for Payware Model

Israeli Air Force Bell UH-1H

Bernhard Lechner creates an authentic IAF appearance for the Bell UH-1H, intended to accompany the Nemeth Designs payware model, which buyers must acquire separately. Emblems and national insignia are placed to mirror the Huey’s desert and urban operations, mapped to the ND_UH1H rotorcraft folder.

: 3.45 MB
: 642
: 4

Repaint for Payware Model

"THR 30" Bell UH-1D

A THR 30 variant for the Bell UH-1D carries Transporthubschrauberregiment 30 markings from Niederstetten, Germany. By B. Lechner, this work draws on the Nemeth Designs Bell UH-1H payware model and emphasizes precise fuselage markings reflecting German Army identity.

: 4.31 MB
: 639
: 4

Repaint for Payware Model

Turkish Navy Bell 212

Bernhard Lechner crafts a Turkish Navy variant of the Bell 212 as a freeware enhancement for the Cera Simaircraft model. It employs a dedicated TURKEY-NAVY section in aircraft.cfg, a TURKEY folder under SIMOBJECTS/ROTORCRAFT/BELL_212, and twin PT6 engines to support maritime surveillance and patrol duties.

: 4.5 MB
: 638
: 3

Repaint for Payware Model

SAMU Dodosim 206 Helicopter

Registration F-GMHC marks the 206 Low Skid variant, identified by a blue stripe for the SAMU theme and the Dodosim branding. The variation tag F-SAMU3 accompanies the designation, and Dodosim receives sole credit as creator.

: 1.42 MB
: 617
: 1

Repaint

Bell 206 JetRanger Helicopter

Patrick Machabert applies dragon butterfly fuselage markings to the default 206 airframe, with a reference image named b206drbf.gif facilitating the design's presentation. The configuration preserves the original geometry of the airframe while presenting a color motif.

: 4.42 MB
: 616
: 6

Repaint for Payware Model

"Flugbereitschaft BMVg" Bell UH-1D

Nemeth Designs’ Bell UH-1H payware model accommodates this variant, which carries authentic Bundeswehr VIP insignia and registration details mirrored on the Flugbereitschaft fleet. The ui_type UH-1D and ui_variation FLBSCH-BMVG appear in the configuration, while a high-detail finish preserves accurate color rendering for crisp close-range views.

: 6.52 MB
: 615
: 3

Repaint

Bell 206 Black/Gold Textures

By Jeff Smith, this black-and-gold finish for the Bell 206 JetRanger emphasizes metallic shading along the fuselage while preserving the core flight model, cockpit systems, and rotor animations. Owners fetch the base model from the Fly Away Simulation repository.

: 1.28 MB
: 615
: 2

Repaint for Payware Model

Air Greenland Bell 212 OY-HCU

Registration OY-HCU anchors a Bell 212 variant associated with Air Greenland, based at Qaqortoq, and Mads Petersen credits the work. It adopts the OY-HCU atc_id and ui_variation HCU-2009, aligning with a single variant focused depiction for the Cerasim Bell 212.

: 2.94 MB
: 614
: 1

Repaint

Bell 206B JetRanger

An orange-accent JetRanger variant replicates the Orange County Choppers helicopter seen on TLC, while Silver Cities Helicopters operates it in Las Vegas. Heath Phillips applies the finish using a dedicated paint kit, and the associated image carries the file name occb206b.gif.

: 3.01 MB
: 606
: 2

Repaint for Payware Model

US Navy Test Pilot School Bell UH-1D

Bernhard Lechner crafts a Bell UH-1D configuration honoring the US Navy Test Pilot School, built on Nemeth Designs’ Bell UH-1H base model. It relies on an [fltsim.XX] entry in aircraft.cfg to apply USNTPS markings, with ui_variation set to USNTPS, and the original payware is required separately.

: 6.9 MB
: 594
: 5

Repaint for Payware Model

ADAC-Luftrettung Bell 412

Bernhard Lechner creates a Bell 412 EP ADAC variant that shows a vibrant yellow color identity and ADAC-style fuselage markings to mirror Germany’s rescue fleet, while noting that ADAC does not operate Bell airframes in reality. The file requires the payware Bell 412 by Cera Simaircraft to run.

: 2.13 MB
: 593
: 5

Repaint for Payware Model

SAPS MMB BO-105

A SAPS-marked Nemeth Designs MBB BO-105 by Shaun Mulder presents registration ZS-HRI and the South African Police Service identity. Two in-flight photographs document the SAPS-specific markings on the BO-105 variant alongside the Nemeth base model.

: 3.48 MB
: 589
: 2

Repaint for Payware Model

Gendarmerie Nationale Bell 412

Bernhard Lechner presents a fictional Bell 412 EP variant named GENDARMERIE, designed for the Bell 412 EP and built upon the Cera Simaircraft base. A folder named GENDARM resides in SIMOBJECTS/ROTORCRAFT/BELL412_EP, and the aircraft.cfg section uses sim=Bell_412_EP with ui_type=412 EP and ui_variation=GENDARMERIE, ui_createdby=Cera Simaircraft.

: 4.04 MB
: 588
: 5

Repaint for Payware Model

German Army/HEER Bell UH-1D

By B. Lechner, this German Army HEER UH-1D variant relies on the Nemeth Designs Bell UH-1H payware model. It uses a folder labeled HEER containing the skin and requires edits to aircraft.cfg to reference ui_type UH-1D and ui_variation HEER.

: 3.67 MB
: 582
: 4

Repaint for Payware Model

Policia Nacional de Colombia Bell 212

Bernhard Lechner creates a variant for Colombia's national police Bell 212, featuring distinctive markings on a twin-engine, two-turboshaft helicopter with a two-blade main rotor. It relies on the Cera Sim Bell 212 payware core and designates ui_variation as COLOMBIA in the aircraft.cfg, linking the entry to the COLOMBIA folder.

: 1.97 MB
: 580
: 2

Repaint

Elite Helicopters Bell 206B

By Jamie Edmond, this Bell 206BIII Jetranger variant bears Elite Helicopters' G-HMPH fuselage markings and a blue with gold stripes finish, featuring full spectral reflections. It is released under the GNU General Public Licence worldwide.

: 2.28 MB
: 579
: 5