South Africa

Scenery Mods for Microsoft Flight Simulator X and Prepar3D

Our current selection of scenery mods and expansions covering South Africa for Microsoft Flight Simulator X and Prepar3D. Completely free to download and use - no registration required. Updated regularly - bookmark to stay up to date.

Sort

Reset

73 Airports In South Africa

This FSX scenery add-on revises 73 South African airports and rural airstrips, applying Google Earth-sourced footprints and Airport Design Editor tweaks to runway geometry, apron detail, taxiway paths, parking codes and basic elevation, covering hubs such as FAOR, FACT, FAPE plus lesser bush strips for balanced VFR or IFR tour planning across the Cape, Highveld and Karoo.

: 207.89 KB
: 3.7K
: 5/5

FAJS

Ray Smith’s freeware AFCAD refresh for Johannesburg OR Tambo International (FAJS) in Microsoft Flight Simulator X realigns the entire ground layout, adding A380-capable stands, revised gate numbering, accurate taxiway signage, extra fuel-truck routes and an improved tower viewpoint for smoother ATC monitoring and AI traffic handling across South Africa’s busiest hub.

: 747.69 KB
: 3.8K
: 4/5
: 5

FACT

Ray Smith’s AFCAD rework for Cape Town International (FACT) refines the FSX default airport with ADE-built BGLs, revised taxiway geometry, realistic stand allocations, optional crosswind runway logic, cleaned autogen exclusions and new object placements, giving South Africa-focused flight-sim community accurate ground routing, AI traffic flow and parallel operations.

: 620.89 KB
: 3.2K
: 4

Table Mountain

Enhancing Microsoft Flight Simulator X with a revised digital elevation model, this Table Mountain scenery rebuilds the Cape Town landmark’s cliff faces, plateau, and surrounding ridges, giving VFR pilots crisper visual cues, improved coastal approach alignment, and seamless compatibility with existing South Africa terrain add-ons.

: 13.43 MB
: 2.4K
: 1

Exclusion File For FAJS Johannesburg

Built for Johannesburg’s FAJS O. R. Tambo International, this exclusion file removes Microsoft Flight Simulator X stock autogen and buildings so the renowned Aeroworx FS2004 airport scenery slots seamlessly into FSX SP1. The lightweight compatibility patch refines AFCAD placement, maintains frame rate, and keeps South African aviation flyers focused on accurate apron, gate, and taxiway layout.

: 13.79 MB
: 1.1K

George International Airport

This scenery add-on models George International Airport (FAGG) in South Africa’s Western Cape with custom buildings, photoreal ground textures and corrected AFCAD, prepared in SketchUp, ADE and SBuilderX, aligning ILS, taxiways, apron stands and night lighting for more authentic regional jet and GA operations in Microsoft Flight Simulator X.

: 10.39 MB
: 597
: 2/5

Cape Town Harbor

This FSX scenery add-on slots Cape Town Harbor into Microsoft Flight Simulator X with photoreal ground textures, hand-placed autogen, detailed piers, container cranes, and accurate shoreline mesh, providing a reliable VFR reference around Table Bay and the Cape Peninsula without noticeable frame-rate overhead.

: 12.09 KB
: 1000
: 1/5

Bloemfontein Airport

Bloemfontein Airport (FABL) scenery for Microsoft Flight Simulator X brings freeware custom-built terminals, revised AFCAD with accurate stands and taxiway signs, photoreal ground textures tied to seasonal switches, and an optional GSX profile, aligning seamlessly with Bloemfontein VFR v2.0 for a geographically correct central South Africa hub.

: 59.78 MB
: 999
: 1

Non-Airport Scenery For Southern Africa

This FSX non-airport scenery package stitches Kruger National Park, coastal harbours, Overvaal resort complexes, power-station stacks and refreshed photoreal ground textures into the Aeroworx terrain mesh, providing precise VFR landmarks and context across Southern Africa for regional bush trips, ferry hops and procedural training flights.

: 110.92 MB
: 984
: 1

Kruger Mpumalanga Int'l Airport

Covering FAKN near Nelspruit, this Aeroworx freeware brings Kruger Mpumalanga International Airport to FSX with custom Gmax structures, photo-real orthoimagery, refined AFCAD and elevation-corrected 1 m mesh, matching runway geometry, taxiway lighting, and local vector water fixes for reliable VFR or IFR ops into South Africa’s Kruger gateway.

: 2.54 MB
: 907
: 1

South African Waypoints Vol. 2

Covering Gauteng’s busy VFR corridor, FSX South African Waypoints Vol. 2 plants detailed 3-D renditions of the Northgate Dome and the distinctive Silver Ball water tower on a photoreal base, giving pilots reliable visual fixes for Johannesburg-FALA shuttles and low-level general aviation navigation in Microsoft Flight Simulator X freeware scenery.

: 16.93 MB
: 490

South African Waypoints Vol. 3

FSX South African Waypoints Vol. 3 adds two frequently referenced visual fixes—Ergo Slimes Dam south of Benoni and the South African Reserve Bank tower above Pretoria—delivering geo-accurate photoreal ground polys and bespoke 3-D models for dependable VFR navigation across Gauteng within the Microsoft Flight Simulator X freeware scenery catalogue.

: 3.95 MB
: 457

New Tempe Airport

Flying into New Tempe Airport (FATP) near Bloemfontein provides a small GA hub in your FSX South Africa scenery set, built with custom 3-D hangars, terminal assets and high-res, seasonally shifting photoreal base imagery; ideal for circuit work, VFR short hops and virtual pilot training; created by Frits Beyer and Jacques Botha.

: 17.95 MB
: 333
: 2

Umhlanga Rocks Beachfront

This FSX scenery recreates Durban’s Umhlanga Rocks beachfront in KwaZulu-Natal with high-resolution ground textures, custom hotel blocks, lighthouse model, and accurate shoreline autogen, giving South Africa VFR flyers a dependable coastal reference for light GA circuits and low-level heli tours.

: 7.93 KB
: 254

King Shaka International

Updated King Shaka International (FALE) for FSX introduces the 2010-era terminal layout, extended runways, accurate Navaids, and tuned AFCAD for seamless AI schedules, giving Durban’s La Mercy hub realistic gate assignments and taxiway geometry; version 1.0 by Pierre Cornelissen with traffic refinements by Mundus Yssel suits regional and long-haul virtual operations.

: 29.57 KB
: 2.3K

South Africa, Robben Island

Adding Robben Island to your Microsoft Flight Simulator X install gives a precise Cape Town landmark with custom coastline, corrected elevation mesh, restored WWII fortifications and the small island airstrip. This Aeroworx freeware scenery integrates photoreal textures, accurate vector roads, dams and hand-placed objects tailored to South African regional landclass.

: 4.69 MB
: 1.2K
: 2/5
: 1

Ellis Park Stadium Johannesburg

Ellis Park Stadium scenery for Microsoft Flight Simulator X adds a custom-built 3-D model of the Johannesburg landmark, complete with photoreal ground textures aligned to default landclass, accurate seating geometry, floodlights, and pitch markings. Ideal for VFR circuits into FAOR or nearby Rand Airport, this freeware recalls the 2010 FIFA and 1995 Rugby World Cup showdowns.

: 2.49 MB
: 1.2K

FALA

Lanseria International Airport (FALA/HLA) AFCAD refresh for FSX fine-tunes stands, taxiway links and approach data, matching current AIP charts so Johannesburg-north GA, charter and regional AI traffic slot correctly. Accurate runway 07/25 lengths, updated ILS, apron edge-lighting and realistic parking codes optimise IFR and VFR operations across Gauteng skies.

: 509.85 KB
: 1.1K
: 40

Worcester Airfield South Africa

Worcester Airfield (FAWC), positioned roughly 110 km northeast of Cape Town, is delivered in this freeware package for Microsoft Flight Simulator X and Acceleration, bringing revised AFCAD data, photoreal ground polys, refined elevation mesh, night lighting and detailed autogen for accurate VFR circuits, ridge-soaring, PPL training and light GA operations amid the Western Cape ranges.

: 6.59 MB
: 922
: 1/5
: 2

Kruger National Park

Covering the length of Kruger National Park, this FSX scenery add-on from Aeroworx threads authentic rest camps, gravel roads, dams and waterholes onto high-resolution Southern Africa terrain mesh, aligning with FSXWORX20; bush strip approaches at Skukuza and Satara gain photoreal context, allowing low-altitude wildlife spotting within accurate coordinates.

: 1007.67 KB
: 858
: 1