FSX General Aviation Aircraft

Page 55

Filter

Reset

Sort

French Alps Piper Super Cub

An L-21 variant carries the registration F-BLHP for Aeroclub du Gresivaudant at Grenoble le Versoud, by Bertrand Barbe. Flight Replicas marks the configuration as a Super Cub with ui_variation 150 hp L-21 F-BLHP Le Versoud and atc_id F-BLHP.

: 6.27 MB
: 63

Repaint

Savannah C-MEGO

Bob Azzaro creates an airshow-themed finish for the ICP Savannah, registered as C-MEGO, built atop Massimo Taccoli’s Savannah v3.8 base model. It resides in the savannah38 folder and preserves the high-wing, spacious cabin layout while highlighting STOL performance and suspension features in a bold color palette.

: 966.89 KB
: 63
: 1

Repaint

Aeromere F.8L Falco III America D-EHHE

By Milan Stefanovic, the Falco F8L carries registration D-EHHE and construction number 227, with former owner HB-UOI and a private owner at EDLH Hamm Lippewiesen, Germany, from 21.09.1977 to 02.10.1982. The D-EHHE variant uses FALCO_V1_2_X.ZIP.

: 7.12 MB
: 62
: 10

Repaint

Piper PA-32RT-300 Lance II N1717F

The Lance II variant uses a 300-horsepower engine and retractable landing gear, with a six or seven-seat cabin and a distinctive copper-on-white exterior. It carries registration N1717F and integrates with the existing freeware base model, with design by Tom Tiedman.

: 2.34 MB
: 62
: 4

Repaint

Extra 300S The Blades G-OFFO (2007)

Like a dedicated variant, this G-OFFO registration is built on the default Extra 300S model and created by Ben Hartmann of UKMIL. A folder labeled OFFO resides in the Extra 300S directory, while lines in aircraft.cfg configure atc_id as G-OFFO and ui_variation as G-OFFO.

: 2.53 MB
: 62
: 2

Repaint

Blue & White Falco F.8L N7639H

A blue Falco F.8L bears registration N7639H, based on the Sequoia Aircraft experimental kit by Massimo Taccoli with Tom Tiedman. The aircraft.cfg includes a fltsim.X block with atc_id=N7639H and ui_variation=Blue N7639H, while the smoke system is adjusted to produce a single-trail plume from the starboard exhaust.

: 6.29 MB
: 61
: 2

Repaint for Payware Model

Piper J-3 Cub G-BDEZ

G-BDEZ appears as a single variant for the J-3 Cub from A2A Simulations, carrying the G-BDEZ registration and matching fuselage and tail markings. No core model is included, so the base payware must be obtained separately. Users place the BDEZ data into the A2A_PiperJ3 directory and adjust aircraft.cfg FLTSIM index accordingly.

: 5.99 MB
: 60
: 4

Repaint

Pink Extra 300S

Microsoft Corporation presents a pink variant of the Extra 300S, registered as N68PW, with the Pink designation and a Single Engine Prop layout. The variant aligns with the Extra 300S lineage, carrying the manufacturer tag Extra and maintaining the base airframe.

: 5.68 MB
: 60
: 1

Repaint for Payware Model

Cessna 182 TI-AJC

The Cessna 182 TI-AJC record documents a Costa Rican private aircraft based at Tobias Bolanos, prepared for the Carenado 182Q platform, with registration TI-AJC. It designates a single variation TI-AJC, uses the ui_type C Skylane 182Q and ATC ID TI-AJC, with a thumbnail file ajc.jpg.

: 4.04 MB
: 59
: 4

Repaint

Piper PA-32RT-300 Lance II N2167A

Registration N2167A anchors this Lance II variant, which is based on the Paul Craig freeware model and linked to PCPA32RT-300.ZIP and PCPA32RT-300_UPDATE.ZIP. The configuration supports a 6/7-seat layout, retractable landing gear, and a T tail, by Tom Tiedman.

: 2 MB
: 58
: 5

Repaint for Payware Model

Cosens Air Taxi And Cargo Services Piper J-3 Cub

Fictional appearance for A2A's payware J-3 Cub depicts an air taxi configuration, linking the model to a compact transport concept. By Dean P. Cosens, a blue example on the ground appears in the accompanying image, illustrating the concept as described.

: 8.9 MB
: 58
: 3

Repaint

Custom Shop ARX-5 Sauber F1 Scheme

The ARX-5X Model X carries a Sauber F1 theme inspired by the 2013 C32. It works only with the Model X and ARX-5X version 2.1, may also operate with 2.0, while ATC ID HB-NEC is defined.

: 1 MB
: 57
: 2

Repaint

Blue & White Zlin Z-142 N4879W

A blue-white arrangement enhances the PWDT Zlin Z-142, carrying registration N4879W and variation Blue N4879W, by Tom Tiedman for the PWDT_Z142.ZIP freeware model and excluding the base aircraft. The Z-142 is a single-engine, low-wing dual-seat trainer.

: 9.31 MB
: 56
: 1

Repaint for Payware Model

Mooney M20J N623SP

Sean Doran designs a Mooney M20J variant identified as N623SP, issued as freeware for general aviation hobbyists seeking an improved cockpit aesthetic. Files reference an atc_id N623SP within the fltsim.x section of aircraft.cfg and use the Mooney M20J designation in ui_type, aligning with the Carenado M20J model.

: 2.28 MB
: 56
: 5

Repaint for Payware Model

CPEA Flight School Piper Archer TI-BDT

TI-BDT variant for the Archer II, by Luis Jimenez Trejos, carries the TI-BDT registration and aligns panel lines and fuselage markings with real-world references. The visuals employ high-resolution graphics with accurately placed markings on the Archer II's low-wing airframe and require ownership of the Carenado PA28-181 Archer II model to be viewed.

: 12.27 MB
: 55
: 3

Repaint for Payware Model

Piper J-3 Cub ZU-AYK

South African-registered Piper J-3 Cub ZU-AYK carries color data by Grant MacLean and draws on a photo from Stellenbosch, South Africa. The ZU-AYK designation marks the sole variant, and anchors its regional registration and the Cub’s familiar, simple airframe.

: 4.39 MB
: 55
: 5

Repaint

Ardmore Aerodrome Cessna 172 ZK-JRA

Jon Murchison creates a Cessna 172SP Skyhawk variant featuring Ardmore Aerodrome styling for the default Cessna 172. The configuration assigns the atc_id JRA and ui_variation JRA, and includes a folder labeled JRA to be placed in the C172 directory, with a simple aircraft.cfg line required to activate it. Ardmore Aerodrome, New Zealand.

: 699.39 KB
: 55
: 5/5
: 1

Repaint

Savannah CDN

Massimo Taccoli's Savannah v3.8 base model gains a Canadian Beer Wheel Covers variation identified as CDN, with the variation name set to Canadian Beer Wheel Covers and ATC ID CDN enabled. The modification places the files under the savannah38 directory, and references the SAVANNAH38.ZIP release as the compatible foundation.

: 958.31 KB
: 55
: 1

Repaint for Payware Model

Piper J-3 Cub SP-AWP

By Lukasz Kubacki, this SP-AWP variant for the J-3 Cub by A2A Simulations carries atc_id SP-AWP and ui_variation SP-AWP, with ui_manufacturer listed as A2A Piper and ui_type as J-3 Cub. The configuration depicts PiperJ3 as the base model and associates the SP-AWP designation with the registration.

: 7.23 MB
: 54
: 3

Repaint for Payware Model

DeHavilland Beaver C-FODB

By Nathan Havercroft, a five-seat float variant carries registration C-FODB. It centers on the DHC-2F model and links to the DHC-2F_check and DHC-2F_ref files, with the designation describing a DHC-2 Floats 5 Seats variation that emphasizes identifiers over aesthetics.

: 2.82 MB
: 54
: 2