FSX AFCAD Files

Page 23

Sort

Reset

Denver International Airport CO

Two BGL files for KDEN, tied to a Denver-area scenery by Patrick Finch, feature one version with Xwind runways activated and another default variant without parking; the files are named KDEN_ADE_RS.BGL and KDEN_ADE_CW_RS.BGL, and only one BGL may be present in the Addon Scenery/scenery folder at a time.

: United States of America
: 73.63 KB
: 251

Louisiana Oil Platforms

Three BGL files—KLFO_ADE_TM, KGLO_ADE_TM, KNGO_ADE_TM—define GPS-based offshore platforms in the Gulf of Mexico. They specify NDBs at 477.0, 396.0, and 391.0 kHz with 100 NM ranges; the Lafayette site sits 65 NM south of its regional airfield, while the Galveston and Corpus Christi locations lie about 7 NM south of nearby airports.

: United States of America
: 3.9 KB
: 250
: 5/5

EGNX

An airport layout adjustment file for East Midlands Airport (EGNX) fixes taxiways and expands the passenger apron to stands 40–45, while rearranging aprons with realistic stand numbers. The modification updates the control tower, adds a fire station, removes air bridges, and ensures all aircraft park on correct stands; created by Noel Marsh-Giddings.

: United Kingdom
: 8.89 KB
: 249

KISP

Matthew Brooks / Alpha-India Group updates Long Island MacArthur Airport in Islip, New York, with ADE V1.38.04 to re-draw aprons and taxiways, add taxiway D, and configure three runways as crosswind. It adds jetways, buildings, GA parking, a fire station, and two BGLs named AIG_KISP_ADE_MB_Default.BGL and AIG_KISP_ADE_MB_Default_OBJ.BGL, the OBJ file including added objects.

: United States of America
: 441.09 KB
: 248
: 5/5
: 1

AFX File For KPWM

Jim Cook creates an AFX file for KPWM that expands the ramp with additional gates and labels each gate with a matching airline, and adds designated cargo ramps with realistic operator assignments; the file named AFX_KPWM_JC.bgl integrates with compatible environments such as Ultimate Terrain X and World of AI traffic packages.

: United States of America
: 10.82 KB
: 247

AFX File For RJFF

An AFX file for RJFF updates gate, ramp, and ATC parking codes at Fukuoka Airport in Japan, guiding aircraft to designated spots when codes are specified. By Macha, the RJFF_fsx folder accompanies the archive and emphasizes alignment with the local layout.

: Japan
: 237.1 KB
: 247
: 6

YBMC

An airport layout file for YBMC Maroochydore (Sunshine Coast) Airport in Queensland enlarges the apron and adds parking areas. It corrects gate numbers, notes incomplete assignments, and documents jetways that can be turned off by lowering display complexity; the runway uses noise-abatement: Landing RWY 36, Takeoff RWY 18, and testing occurs with WoAI AI only.

: Australia
: 115.39 KB
: 246
: 1

Boscobel Aerodrome

Boscobel Aerodrome (MKBS) in Jamaica presents the older layout now known as Ian Fleming International, with a longer runway and expanded parking compared to the former field. Gate 3 remains allocated to Air Jamaica Express (JMX), a .bgl for Ocho Rios is included, and original work by Martin Erinin is upgraded by Chris Zoepound.

: Jamaica
: 7.51 MB
: 242

AFX File For LEVC

Victor Suau documents Valencia Airport in Spain as LEVC, listing AFX_LEVC.bgl and AF2_LEVC.bgl as related files. ATC frequencies include Ground 121.700MHz, Tower 118.550MHz, Approach 120.100MHz, and Centre 124.750MHz to diagnose communications issues, with these frequencies covering Ground, Tower, Approach, and Centre operations.

: Spain
: 10.11 KB
: 241

YGLA

Gladstone Airport in Australia features a runway extended to 1920 meters, removal of the parallel taxiway, a new taxiway on the opposite side, modified parking, and PAPI on runway 28.

: Australia
: 5.8 KB
: 237

EHAM

Designed to adjust existing airport facility data for EHAM, this adjustment refines taxiway signage and ground markers on Schiphol’s main and secondary runways, aligning labels with real-world signage and standard taxi patterns. Developed by Peter van Dusschoten, it also adapts gate areas for a smoother runway-to-apron transition.

: Netherlands
: 57.02 KB
: 236

DBBB

Cotnou, Benin anchors the work in a precise location, while d'Oliveira Thomas is named as the creator. With these two explicit details, the record remains focused and factual, linking the place to the author without introducing any additional identifiers or assumptions.

: Benin
: 556.92 KB
: 224
: 3

AFCAD For EHRD

Joost de Wit presents a two-file enhancement for Rotterdam-Zestienhoven, using Airport Design Editor to add two .bgl files that reposition parking stands and refine taxiway geometry around EHRD. The revision emphasizes present-day runway alignments and smoother traffic flows, reflecting the airport's regional and charter operations near western Netherlands.

: Netherlands
: 128.76 KB
: 223
: 1

FGAB

An island airfield FGAB receives a new configuration to support AI traffic, with a freshly created runway 05/23 and a listed control frequency of 122.200. Parking arrangements include a 21.3-meter main parking spot along the apron.

: Equatorial Guinea
: 1016.6 KB
: 221
: 6

AFCAD For The BluePrint Simulations TJSJ

A modified layout file revises the AF2_TJSJFSX.BGL for TJSJ, applying the 2009 approach plates and refining AI parking at Terminals B through E. It adds GA ramps, additional on- and off-airport facilities and vegetation, and introduces AI parking spots for a forthcoming Terminal A based on a preliminary map showing DAL/NWA and USA/AWE.

: Puerto Rico
: 352.97 KB
: 219
: 1

KBRD

Brainerd Lakes Regional Airport in Minnesota gains a new runway 16/34 with ILS 34, while runway 12/30 closes, according to KBRD_RB. AI traffic uses the new runway, and the ILS for Runway 34 covers 109.70 inbound course 340, by Ryan Butterworth.

: United States of America
: 9.28 KB
: 217

TJBQ AFCAD Fix

Diego Soler authors a fictional modification that adjusts Rafael Hernandez Airport in Aguadilla, Puerto Rico. The visual shows a plane over the field, and the layout does not reflect real-world geography for the depicted area.

: Puerto Rico
: 157.91 KB
: 217
: 1

EDKB

Bonn-Hangelar, Germany, hosts a file designed with ADE conceived by Jon Masterson; the piece carries a credit to Ralf Maylin, reflecting a collaboration between two named contributors associated with this German locale for record-keeping and historical context.

: Germany
: 5.15 KB
: 215

AFD File For RPMD

An AFD update for Francisco Bangoy International Airport in Davao City, Mindanao, Philippines redraws aprons and taxiways, adds jetways, and codes gates and parking to airlines and aircraft. It includes two BGL files that reposition GA and business-jet parking and modify the control tower, reflecting Google Earth-inspired layout and new signage.

: Philippines
: 6.5 KB
: 215

Tresco Heliport

By Ryan Bell, Tresco Heliport encompasses a static helicopter, a correctly sized waiting room, and tractors parked behind the building, with accurate helipad locations and a central cross-aisle path, plus a fire engine. The EGHT_ADEX_RB.BGL file places this heliport on the approach to Tresco Private Airstrip and is about 90% accurate.

: United Kingdom
: 3.19 KB
: 214