FSX Helicopters

Page 10

Filter

Reset

Sort

INEM-Portugal Bell 412

This INEM-PORTUGAL variant for the Bell 412 shows vivid medical markings on the four-blade rotorcraft operated by Portugal's National Institute of Medical Emergency. It relies on the Cera Simaircraft Bell 412 payware model to function, with cockpit refinements by Dirk Hueschelrath and Bernhard Lechner providing base visuals.

: 4.44 MB
: 906
: 6

Patch

Royal Netherlands Navy Bell UH-1C Panel Fix

René Spaan presents a panel update for the Nemeth/MILVIZ Bell UH-1C family, aligning Dutch naval color schemes with corrected cockpit references after a CS Weapons Package reference. The adjustment modifies aircraft.cfg lines across multiple fltsim entries, using textures labeled RNLN1 through RNLN7 and atc_id values such as 001, 244, and 251.

: 2.09 MB
: 867
: 5/5
: 5

Repaint

Piasecki H-21C - May 2012 Upgrade

An update for the Piasecki H-21C Flying Banana, distributed as PIASH21C.ZIP by Mick Posch, relocates the external starting camera and enhances flight dynamics with sharper responsiveness, plus higher-altitude lift and more realistic fuel use. It also fixes the New York Airways front door window behavior during operation.

: 10.68 MB
: 862

Complete with Base Model

AI SH-60 Seahawk

Derived from aicarriers 2 r2, this stand-alone asset lets users spawn and control a SH-60 variant helicopter. It includes a folder named SH-60_Plane_Guard and a separate sound folder to accompany it, enabling autonomous use without requiring additional integrations.

: 1.76 MB
: 848

Repaint

Robinson R22

Robinson R22, registration G-BYZP, is documented with a used yellow finish and is attributed to Steven Frost of the UkPilots Organisation. The note centers on the default helicopter variant, highlighting the specific registration and creator credits.

: 1.32 MB
: 847
: 4/5
: 1

Repaint for Payware Model

Petroleum Helicopters Bell 206B

Petroleum Helicopters operates a Bell 206B JetRanger with HS, registered N206PH, and painted by Jeff Dugan. The ui_type field designates the III variant and PHI variation, and the Bell_206B_JetRanger_III_HS reference anchors the configuration, crediting Eagle Rotorcraft Simulations.

: 2.82 MB
: 843
: 3

Repaint

Fictional Army OH-58C Kiowa Scout #03915

By Alejandro Amezcua, this Kiowa Scout variant appears as v2.0 for the Bell 206B, with two paint options: glossy by default and a flat alternative, and a pilot in an Army ACU flight suit. It carries atc_id 03915 and atc_flight_number 915, and does not overwrite the prior v1.0.

: 4.42 MB
: 822
: 4

Repaint for Payware Model

Koninklijke Luchtmacht AS 332 L2

By Bernhard Lechner, this color scheme targets the Koninklijke Luchtmacht markings on the Nemeth AS 332 Super Puma and requires the original Nemeth Design aircraft for compatibility. It emphasizes the Netherlands Air Force identity and relies on the Nemeth design as the compatible baseline.

: 4.28 MB
: 818
: 6

Repaint for Payware Model

"LTG 61" Bell UH-1H

By B. Lechner, the Bell UH-1H features Lufttransportgeschwader 61 markings tied to Penzing, Germany, and targets the ND_UH1H baseline model by Nemeth Designs & MILVIZ. It emphasizes high-fidelity surfaces across the fuselage, tail boom, and rotor assembly, conveying an authentic European air force rotorcraft in active duty context.

: 4.25 MB
: 814
: 3

Repaint for Payware Model

Royal Canadian Air Force Bell 212

Developed by Bernhard Lechner, this Bell 212 aligns with the RCAF's 424 Tiger Squadron in a rescue-focused variant, capturing historical operations and distinctive markings. Detailed insignia and squadron badges faithfully reproduce RCAF identifiers for this configuration of the aircraft.

: 3.42 MB
: 814
: 4

Repaint for Payware Model

Westland Lynx

Westland Lynx GLYnX-variant carries a German Lynx reference and refines camera definitions for multiple views, with Erwin Welker credited for the work. The real WK88a variant uses wheels, highlighting a mismatch between the model and its depiction.

: 4.78 MB
: 788
: 2

Repaint for Payware Model

Dutch Aviation Bell 412 EP

Two variants exist for the Nemeth Design Bell412_EP, designated SAR DUTCH AVIATION with atc_id R-01 and SAR GRAY DUTCH AVIATION with atc_id R-02. R.A.W.L.S DESIGNS creates the coloration to reflect the Netherlands RAF Blackwolf Squadron lineage under owner RealPilotBlackWolf, aligning with the Bell_412_EP base for the two color variants.

: 5.54 MB
: 783
: 8

Repaint

Orbit Airlines Bell 206 Helicopter

By Stephen Hulme, this modification converts the Bell 206B JetRanger into Orbit Airlines colors, with ui_variation Orbit Airlines and ui_type 206B JetRanger. The configuration includes an fltsim entry in aircraft.cfg and sets atc_id Orbit alongside atc_id_color=0xc6eff7ff.

: 2.08 MB
: 757
: 5/5
: 1

Patch

Default Robinson R22 Blurred Texture Fix

Paul Craig provides replacement image files that improve the R22 in the simulator, removing blur and delivering a clearer exterior for this two-seat light rotorcraft commonly used as a trainer. Users copy the DDS file Robinson_R22_T.dds into the R22’s main directory under SimObjects\Rotorcraft\Robinson_R22.

: 1.5 MB
: 736
: 5/5
: 2

Repaint for Payware Model

Hokkaido Government Cera Bell 412

Bell 412 EP variant for the Hokkaido Government in Japan, by Bernhard Lechner, models a silhouette close to the original, in service with the prefecture. It remains not exact to a millimeter, but stays near the original.

: 2.97 MB
: 734
: 5

Repaint

Bell 206 JetRanger 'Thunder' Textures only

A fictional color layout for the default Bell 206B JetRanger is provided, credited to Raul Abella. The format uses DXT5 DDS, and an image at /userimages/fsx206thndr750.JPG accompanies the entry, illustrating the presentation for the default Bell 206B JetRanger.

: 2.44 MB
: 727
: 3

Repaint

Austrian Air Force Bell 206B JetRanger

Within a flight-simulation context, the Bell 206B JetRanger operated by Austria’s Bundesheer appears as a visual change for the default Bell 206 helicopter, aligning with the JetRanger variant used by the force. Martin Gustav earns credit for the work.

: 3.14 MB
: 726
: 3

Repaint for Payware Model

"Gronlandsfly" Bell 212

An operator-specific Bell 212 skin targets Gronlandsfly/Greenlandair, carrying the ui_variation GRONLANDSFLY and ui_createdby Cera Simaircraft. B. Lechner is credited as the author, and the modification references the Bell_212 model with a Greenland skin labeled GREENLAND in its configuration.

: 2.89 MB
: 719
: 4

Repaint for Payware Model

Bristow Helicopters Bell 212

By Bernhard Lechner, this Bristow-branded exterior variation for the Bell 212 targets the payware model from Cera Simaircraft and has been tested on SP2 builds. It places Bristow branding on the fuselage and tail, uses a BRISTOW directory within the BELL_212 assets, and adds a ui_variation entry labeled BRISTOW in the aircraft.cfg.

: 3.62 MB
: 716
: 5

Repaint for Payware Model

NSCA Bell UH-1H

An NSCA-themed designation for the Bell UH-1H requires the Nemeth Designs base model to operate and places a NSCA folder into SIMOBJECTS/ROTORCRAFT/ND_UH1H. By Bernhard Lechner, it carries NSCA insignia and designates variant NSCA-05 to reflect Australian safety operations.

: 6.03 MB
: 709
: 5