FSX Turboprops

Page 20

* Please note, not all files have been tagged yet so remember to check files using the "Untagged Files" filter on the dropdown box as you may miss some files.

Piper Cheyenne II VH-ATC

A practical FSX repaint providing a fictional VH-ATC livery for the Digital Aviation Piper PA31T Cheyenne II, this textures-only add-on includes a ready [fltsim] aircraft.cfg block with appropriate UI fields, leaving model, panel, and sounds unchanged; released under GPL v3 for straightforward redistribution within Microsoft Flight Simulator X turboprop installs.

: 4.18 MB
: 682
: 2

Complete with Base Model

Kenmore Air DeHavilland DHC3

Kenmore Air’s DHC‑3 Turbo Otter freeware for Microsoft Flight Simulator X (FSX), from Premier Aircraft Design, offers a tuned FDE (E. Heyart/D. Crance), full animations with amphibious float systems, and a cockpit with 2D/VC layouts, calibrated autopilot and engine parameters, custom gauges (incl. ground handling, Davtron M803), STOL performance modeling, an interactive cabin with opening exits and cargo doors.

: 12.79 MB
: 973
: 6

Complete with Base Model

Ward Air DeHavilland DHC3 Turbo Otter

Microsoft Flight Simulator X (FSX) add-on of the Ward Air De Havilland DHC-3 Turbo Otter amphibian, powered by a Garrett TPE-331-10-12JR and 4-blade prop, modeled as a 12-seat STOL utility transport with full animations, dynamic shine, full suspension, a 2D panel, virtual cockpit and complete cabin, opening crew/cargo doors, sound, and Acceleration/SP2 compatibility from Premier Aircraft Design.

: 11.42 MB
: 394
: 3

Complete with Base Model

DeHavilland DHC3 Turbo Otter Amphibian

For FSX by PAD, this freeware DeHavilland DHC-3 Turbo Otter Amphibian features two models with full control-surface animations, dynamic shine, a detailed suspension system, amphibious floats with water rudders, and a 12-seat cabin with operable crew/cargo doors, plus a tuned FDE (Heyart/Crance), STOL bush performance, VC/2D panels, custom XML gauges, Ground Handling, Davtron M803 integration, and Air Saguenay/Harbour Air liveries.

: 13.45 MB
: 2.3K
: 3

Complete with Base Model

DeHavilland DHC8-Q311 Four Pack

FSX DeHavilland DHC8-Q311 Four Pack provides a freeware Dash 8-300 add-on featuring four real-world liveries (Air Canada Jazz, Aires, Air New Zealand, BahamasAir), a reworked 2D flight deck panel, a fully clickable VC (main/overhead/pedestal), refined flight dynamics, authentic PW123 turboprop soundset, animated passenger/cargo doors, and Acceleration/SP2 compatibility; FS2004 not supported, by Premier Aircraft Design.

: 21.85 MB
: 2.5K
: 5/5
: 10

Complete with Base Model

Air Saguenay DeHavilland DHC3

PAD’s Air Saguenay DeHavilland DHC-3 Turbo Otter for FSX delivers a STOL-focused model with wheel and wheel/ski variants, dynamic shine, active suspension, a 2D panel and virtual cockpit (VC) with cabin, crew and cargo doors, plus DH3-specific gauges (overhead/pedestal/engine, Davtron M803, Ground Handling gauge). Flight dynamics by Heyart/Crance are tuned for FSX Acceleration/SP2 for accurate power response and envelope fidelity.

: 12.06 MB
: 1.1K
: 5/5
: 2

Complete with Base Model

DeHavilland DHC8-Q311 5EX

FSX DeHavilland DHC8-Q311 5EX by Premier Aircraft Design bundles five Dash 8-300 turboprop variants (BA Tartan, Sabena, Cirrus, Air Southwest, Air Nostrum) with a revised 2D panel, reworked VC/avionics, tuned FD, PW123B sound set, improved prop disk rendering, dynamic shine, animated airstair/cargo door, 56-seat cabin, HTML kneeboard checklists; FSX SP2/Acceleration only; not FS2004.

: 22.54 MB
: 1.7K
: 11

Complete with Base Model

DeHavilland DHC8-Q311 Caribbean Pair

FSX DeHavilland DHC8‑Q311 Caribbean Pair supplies two regional airline repaints (Caribbean Star V2‑LFF, LIAT V2‑LFV) with revised flight dynamics, upgraded 2D panel and dynamic VC, and HTML checklists. Premier Aircraft Design adds a 56‑seat layout, animated airstair and cargo hatches, transparent prop disc and dynamic shine, plus flight‑management tweaks; tuned for Microsoft Flight Simulator X Acceleration/SP2 only, not FS2004.

: 21.45 MB
: 1.2K
: 4/5
: 14

Complete with Base Model

DeHavilland DHC6-300 Twin Otter

FSX-native DeHavilland DHC-6-300 Twin Otter pack with two liveries (BA/Loganair G-BVVK and Scilly Skybus G-BIHO), featuring a custom panel with dedicated gauges, a dynamic VC with full cabin, custom turboprop sounds, reflective textures, full suspension, and animated doors; SP2/Acceleration compatible, not FS2004. By Premier Aircraft Design.

: 23.35 MB
: 21.9K
: 5/5
: 34

Complete with Base Model

Air Tindi DeHavilland DHC6-300

FSX Air Tindi DeHavilland DHC-6-300 Twin Otter (C-FGOG, 1998 livery) floatplane by Premier Aircraft Design delivers FSX Acceleration/SP2-compatible features: fully animated model with dynamic shine, included sound set, 2D panel plus VC and full cabin, operable doors and airstair, and a functional water-rudder control for seaplane taxiing; Yellowknife-based scheme included. Not compatible with FS2004.

: 16.86 MB
: 2.2K
: 7

Complete with Base Model

DeHavilland DHC8-Q311

FSX DeHavilland DHC8‑Q311 (Dash 8‑300) freeware from Premier Aircraft Design delivers dual liveries (US Airways Express/Piedmont N343EN and BA CitiExpress G‑NVSB) with refined flight dynamics, full control‑surface animations, synchronized turboprop sounds, PW123B/Hamilton Standard prop modeling, an updated 2D panel, HTML checklists, a readable virtual cockpit, interactive doors, and Acceleration/SP2‑ready gauges and textures.

: 21.33 MB
: 1.8K
: 14

Complete with Base Model

Cayman Airways Express Twin Otter

FSX Cayman Airways Express DHC-6-300 Twin Otter (VP-CXA) by Premier Aircraft Design is a complete add-on featuring a 2D panel, dynamic virtual cockpit with full cabin, custom soundset, wing views, dynamic shine, animated exits (pax, pilot, luggage), and fully articulated suspension/gear, built in FSDS2/3; FSX Acceleration/SP2 compatible (no DX10; not FS2004).

: 17.54 MB
: 901
: 11

U.S. Forestry Service King Air 350

Focused FSX repaint providing a U.S. Forestry Service livery for the default Beechcraft King Air 350, this textures-only package by Anthony Celentano supplies a USFS paint scheme and agency markings while leaving the stock model, panel, and flight dynamics untouched—an efficient Microsoft Flight Simulator X livery/skin for the Beech King Air 350.

: 1.51 MB
: 152
: 1

Repaint

FedEx Feeder Cessna C208 Grand Caravan

FedEx Feeder repaint for the default FSX Cessna 208B Grand Caravan (Canadian C‑FEXF) delivering an exterior-only livery/skin that retains the stock passenger-window fuselage and crew door, applies accurate FedEx branding and registration, and alters neither model nor flight dynamics; requires the original freeware base aircraft available in the Fly Away Simulation library.

: 657.73 KB
: 4.1K
: 4/5
: 4

Snow Camo Beechcraft King Air 350

Snow Camo Beechcraft King Air 350 is a texture-only repaint for Microsoft Flight Simulator X, applying a winter/arctic camouflage livery to the default Beechcraft King Air 350 twin-turboprop; it alters exterior textures only, leaving the stock model, flight dynamics, panel, and gauges unchanged for seamless integration with the default aircraft.

: 2.14 MB
: 126
: 1

Pilatus PC-7 Smoke System

Designed for Tim "Piglet" Conrad's Pilatus PC-7 Turbotrainer (PC7_PAK.ZIP), this FSX/FS9 add-on enables a dedicated smoke system by configuring effect entries via aircraft.cfg, providing straightforward aerobatic/display smoke and training plume/vapor visuals; a lightweight, minimal modification authored by Alexander Jennewein for reliable smoke effect control.

: 6.19 KB
: 134

Repaint

Saguenay Express Beech King Air 350

Built for the default Microsoft Flight Simulator X Beechcraft King Air 350, this freeware repaint by Jean-Pierre Couture provides a fictional “Saguenay Express” livery—external textures only—aligned to the stock Beech_King_Air_350 UV layout, adding regional-airline branding to the twin-engine turboprop without modifying flight dynamics, panel, model, or sounds.

: 2.44 MB
: 554

Complete with Base Model

Zambia Flying Doctor Service Cessna 208B

Created by Bashir Ismail, this FSX repaint applies Zambia Flying Doctor Service (ZFDS) air-ambulance markings to the default Cessna 208B Grand Caravan, with accurate EMS logos and registration details (e.g., 9J-AGC/9J-FDS). This texture-only livery suits bush flying and medical transport scenarios in Microsoft Flight Simulator X.

: 13.11 MB
: 582
: 6

Repaint

DHL Cessna C208B Grand Caravan

This freeware DHL-themed livery for the FSX default Cessna 208B Grand Caravan by Amara SokNhep features accurate texture mapping, color fidelity, and logo placement for realistic cargo operations. Suited to short-field routes and remote strips, it reflects real DHL usage; the developer notes an XML gauge/keystroke request to set the Fuel Condition Lever to low idle (~25% mixture).

: 1017.78 KB
: 3.8K
: 3

Complete with Base Model

Converted Lockheed L-188 Electra

An FSX freeware conversion of Chris Buff’s Lockheed L-188 Electra, this package by David Grindele offers a rebuilt aircraft.cfg and .air file (tighter flight dynamics), per-engine smoke effects, revised nav lights and beacons, optional Shockwave 3D landing lights support, and 28 included liveries with panels and sounds preconfigured; FSX-only (not FS9/FS2002).

: 143.57 MB
: 2.8K
: 31