FSX Historic & Vintage Aircraft

Page 29

Filter aircraft by:
Sort by:

* Please note, not all files have been tagged yet so remember to check files using the "Untagged Files" filter on the dropdown box as you may miss some files.

Gennadich DR1Repaint

Gennadich DR1. Includes repaints for the FSX DR1 of Gennadich software. Both repaints have been tested on FSX with Directx10 and full shadows. By Stefostef. Screenshot of Gennadich DR1 in flight. Hi, those are repaints for the FSX DR1 of Gennadich sowtfare. Hope KOTS will be out this year !!!!! Repaint have been tested on FSX with directx10 and full shadows. You can modify the repaint as you want, hope you like it. Installation: Rename your original texture folder by...

File size
5.49 MB
Download hits
394

SP2 Waco UPF-7Complete with Base Model

Waco UPF-7. An FSX rebuild of the earlier Waco UPF7 biplane. Includes updated VC, resized textures and XML gauges. Not tested in Vista/DX10. By Tim Conrad. Screenshot of Waco UPF-7. 1)After downloading the zip, locate it, and extract the zip to a temp folder. 2)If you already have my UPF-7 from FS9 flying in FSX, you can back it up to a new area first, or just get rid of it. This new release will work without the old package. 3)Copy the UPF-7 folder over to your...

File size
6.31 MB
Download hits
1321

Peruvian Bristol Fighter BF2BRepaint

Peruvian Bristol Fighter BF2B. Textures only; requires F2BX1PT1.ZIP. Original model by Robert Bruce. Repaint by Chris Brisland. Screenshot of Peruvian Bristol Fighter BF2B in flight. Repaint name: Bristol Fighter BF2B - Peruvian markings. Original aircraft is FSX freeware by Robert Bruce. Painter's notes and Installation instructions. This paint has been prepared by Chris Brisland. This skin represents a two-blade prop Bristol Fighter belung to the Peruvian armed...

File size
2.98 MB
Download hits
168

Bristol Fighter BF2BRepaint

Bristol Fighter BF2B - D8084. Textures only; requires F2BX1PT1.ZIP. Original model by Robert Bruce. Repaint by Chris Brisland. Screenshot of Bristol Fighter BF2B in flight. Repaint name: Bristol Fighter BF2B - D8084 pre Italy. Original aircraft is FSX freeware by Robert Bruce. Painter's notes and Installation instructions. This paint has been prepared by Chris Brisland. This skin represents D8084 - before she was sent to Italy - this is just a gues, as Robert's paint...

File size
2.54 MB
Download hits
249

Avia BH-5 And Bk.11Complete with Base Model

Avia BH-5 And Bk.11. The plane was constructed according to the type BH-1, the first successful plane produced by the Avia Works. It was an all-wooden two-seat training, sports and messenger plane, which was bigger than BH-1, more solid and more sophisticated, in its aerodynamics and technology. It was designed for flying basic acrobatics. The BH-5 was the first Czechoslovak plane to win an international contest and thus received the King of Belgium's Prize and the prize of the Belgian Tourist...

File size
31.66 MB
Download hits
822

Spirit Of St. LouisComplete with Base Model

Spirit Of St. Louis. This file contains the default FS2004 Spirit of St. Louis (Ryan NYP) that has been coverted to FSX. Includes upgrades to flight dynamics. Package by David Grindele. Screenshot of Spirit Of St. Louis in flight. "FS9 Default Spirit_of_StLouis Converted TO FSX" "Will no longer work in FS9 in it's converted state" I have given the Converted Spirit_of_StLouis a few updates to work in FSX such as better flight dynamics I...

File size
13.37 MB
Download hits
2835

Airspeed OxfordComplete with Base Model

Airspeed Oxford. A full Gmax aircraft with fully interactive VC. An update of the FS2004 version with many improvements to the original. Both camo and civil versions included. By Keith Hackett. Screenshot of Airspeed Oxford in flight. Thankyou for downloading my Airspeed Oxford package for FSX. I hope you enjoy flying it. The package is basically an update of my FS9 version, which although worked in FSX to a degree was in need of several modifications.Once I got going I...

File size
3.97 MB
Download hits
725

Curtiss JennyComplete with Base Model

Curtiss Jenny. This file contains the default FS2004 Curtiss Jenny that has been coverted to FSX. Includes updates such as better flight dynamics and smoke effects. Also includes eleven repaints. Package by David Grindele. Screenshot of Curtiss Jenny in flight. "FS9 Default Curtiss Jenny Converted TO FSX" "Will no longer work in FS9 in it's converted state" I have given the Converted Curtiss_Jenny afew new updates.Such as better flight...

File size
31.86 MB
Download hits
3524

Lockheed VegaComplete with Base Model

Lockheed Vega. This file contains the default FS2004 Lockheed Vega that has been coverted to FSX. Features updates such as better flight dynamics and updated lighting. Includes eight repaints. Package by David Grindele. Screenshot of Lockheed Vega in flight. "FS9 Default Lockheed_Vega Converted TO FSX" "Will no longer work in FS9 in it's converted state" I have given the Converted Lockheed_Vega alot of new updates. If you have the...

File size
24.76 MB
Download hits
2324

DeHavilland CometComplete with Base Model

DeHavilland Comet. This file contains the default FS2004 DeHavilland Comet that has been coverted to FSX with a lot of updates, including better flight dynamics and lights. Also includes three repaints. Package by David Grindele. Screenshot of DeHavilland Comet in flight. "FS9 Default Microsoft DeHavilland Comet Converted TO FSX" "Will no longer work in FS9 in it's converted state" I have given the Converted DeHavilland Comet alot of new...

File size
21.83 MB
Download hits
1895

Ford Tri-MotorComplete with Base Model

Ford Tri-Motor converted from the FS2004 default TriMotor. Includes many new updates along with better flight dynamics. Also includes twelve new repaints. Package by David Grindele. Screenshot of Ford Tri-Motor in flight. "FS9 Default Ford TRI-MOTOR Converted TO FSX" "Will no longer work in FS9 in it's converted state" I have given the Converted Ford TRI-MOTOR alot of new updates. If you have the Shockwave 3D Lights installed then you will...

File size
48.29 MB
Download hits
7428

Stinson 108 UpdatePatch

Stinson 108 Update. for use with STIN108X.ZIP. This update gets rid of the small ghostly apparition following about 30 feet behind the Voyager. It also includes a new panel.cfg file that replaces a couple of non-FSX compatible gauges. By Paul Clawson. Screenshot of Stinson 108 Voyager in flight. After I up loaded the FSX version of the Stinson 108 I discovered it was being followed by a small apparition about 30 feet behind the aircraft. At first I thought it was another sighting...

File size
117.05 KB
Download hits
473

Stinson 108 VoyagerComplete with Base Model

Stinson 108 Voyager. An FSDSv3.5 project compiled with Xtomdl into FSX. It has the usual animations and comes with a red-cream and a blue-white factory style livery. By Paul Clawson. (See also STN108X2.ZIP). Screenshot of Stinson 108 Voyager in flight. This is a FSDSv3.5 project which converts my FS2004 Voyager into a format where it is compiled by Xtomdl into the FSX format. The is what FSDSv3.5 was conceived to do and in this case worked flawlessly. This project is not...

File size
961.31 KB
Download hits
1258

Boeing PW-9Complete with Base Model

Boeing PW-9. The PW-9 was much inspired by the Fokker D-VII. The fuselage was of welded steel tubing construction put together by arc-welding (a Boeing-developed technique). The aircraft was a single-bay biplane with tapered wings. The lower wing was shorter and narrower than the upper wing. The wings were of traditional wooden frame construction with fabric covering. During 1926, the production PW-9s were shipped to US bases in Hawaii and the Philippines. Gmax source included. Complete...

File size
6.41 MB
Download hits
518

DeHavilland Dh89a Dragon RapideComplete with Base Model

DeHavilland Dh89a Dragon Rapide. Features fully working VC with smooth gauges. Sixteen paint schemes included. Complete aircraft, no other files needed. Includes custom panel and FX. By Dave Garwood and CBFS design team. Screenshot of DeHavilland Dh89a Dragon Rapide in flight. Model and textures by Dave Garwood Additional textures by Garry Russell, Mark Beaumont and Mike Wilson. VC gauge textures by Rick Piper and Dave Garwood Prop textures by Bob Rivera. 2D panel and gauges...

File size
34.24 MB
Download hits
3949

Sikorsky S-38 NC144MComplete with Base Model

Sikorsky S-38 NC144M. The Sikorsky S38 was used by Pan American Airways throughout the Caribbean and South America. Adapted for FSX by Eric Buchmann. Installation: Just put in your FSX / Simobjects / Airplanes folder and it should work!!! ...

File size
1.63 MB
Download hits
456

Caproni StipaComplete with Base Model

Caproni Stipa. Built in 1932 to test the thrust effect of a tubular fuselage. By Bill Holker. Screenshot of Caproni Stipa in flight. ...

File size
6.36 MB
Download hits
355

Bristol Fighter F.2B Mk.1 (All Parts)Complete with Base Model

Bristol Fighter F.2B Mk.1. Screenshot of Bristol Fighter F.2B Mk.1 (E2529). IMPORTANT - This file contains all parts (1-4) of this release. Parts 2 to 4 are optional. Parts 2, 3 must be installed in the correct sequence in order to function correctly. Other optional files in this release of the Bristol Fighter are [F2BX1Pt3.zip, F2BX1Pt4.zip] Aircraft included in this file include 4 examples of the Bristol Fighter Mk.1 with long diagonal exhausts and 2 blade propellor....

File size
72.93 MB
Download hits
1673

De Havilland DH82a Tiger MothComplete with Base Model

A complete De Havilland DH82a Tiger Moth package compatible with all versions of FSX (including Steam Edition) and all versions of Prepar3D (including v4). The original model has been developed by Anthony Lynch (Ant's Airplanes). Features of the model Native FSX SP2 model using bump and specular maps which also works in P3Dv4 Custom smooth 3D gauges (only the GPS is a default gauge) - Working Auto Slots Startup by pulling the prop Model lodded for better performance in...

File size
421.96 MB
Download hits
7085

Hughes XF-11/R-11AComplete with Base Model

FS2004/FSX SP1 Hughes XF-11/R-11A. Four repaints for the XF-11. This is the whole model package. This is another freeware lost classic, with a very nice VC, nice model, and blistering performance. If you want to blast along at 400+ kts/50,000 feet behind 56 cylinders, 8720 cu. in., and 16 prop blades, this is your machine. Ian Lawrence produced the original model, and Craig Richardson at Classic Wings put the cockpit in it and polished the original textures and FDE. This package adds four 'what...

File size
34.18 MB
Download hits
3858