United Kingdom

Page 7

Sort

Reset

RAF Valley

This FSX scenery upgrade for RAF Valley EGOV brings current Royal Air Force infrastructure to Microsoft Flight Simulator, adding photoreal textures of the Anglesey, Wales aerodrome, updated runway lighting, precise taxiway geometry, Hawk T1 dispersal areas, hardened shelters and Sea King SAR pads for authentic UK military sorties.

: 219.37 KB
: 1.1K
: 1

Barton City Airport

Historic Barton City Airport (EGCB) scenery refreshes Manchester’s grass-strip field with accurately sited 1930s hangars, Europe’s oldest brick control tower, detailed club apron and heli pads, matched to FSX terrain, Horizon VFR and default meshes. GA pilots gain realistic ground cues for pattern work, rotary-wing training and local sightseeing hops.

: 56.64 MB
: 1.1K
: 1

Edinburgh

Covering Edinburgh from the Pentland Hills through Musselburgh to EGPH and the Firth of Forth coastline, this FSX photoreal scenery layers high-definition orthoimagery on the default terrain, integrates smoothly with UTX Europe and custom mesh, adds calibrated night textures, and maintains accurate landmark placement for dependable VFR and low-level IFR circuits.

: 65.32 MB
: 1K
: 4/5
: 1

Kent Manston International UK

Covering southeastern England's EGMH, this FSX scenery supplies a reworked AFCAD featuring correctly offset 10/28, hand-drawn touchdown zones, dual-end ILS beams, a straight parallel taxiway, and the restored south perimeter track. Closed spurs are marked, and static AN-225 plus 747 models occupy terminal stands for credible ramp ambiance.

: 1.21 MB
: 1K
: 2

England

Regional flyers looking for fresh UK hops will welcome this FSX add-on: twelve fictional yet location-aware airfields—eight in England, three in Northern Ireland—each reworked with added gates, aprons, static vehicles and other visual details while remaining frame-rate friendly. Authored by J. D. Starseed for Microsoft Flight Simulator X.

: 2.04 MB
: 1K
: 1/5

Bournemouth International

Covering England’s south-coast gateway, this FSX Bournemouth International Airport (EGHH) upgrade supplies new terminals, bespoke hangars and AFCAD layout corrections, plus expanded GA and FRA corporate ramps, accurate hold-short fixes and optional RWY12 details, blending with default or Just Flight VFR photo scenery; included Falcon AI schedules inject steady executive traffic for authentic apron flow.

: 4.13 MB
: 1K
: 3/5

Glasgow Airport

Updated Glasgow Airport EGPF scenery rebuilds Scotland’s hub with expanded heavy-jet ramp sizes, supplementary taxiways, fresh runway turn-offs and airline-coded jetway stands, easing AI traffic flow across the Clyde estuary field. The AFCAD update adds accurate taxiway signage, vehicle routes and gate allocations, mirroring current charts for smooth flight-sim ops in FSX.

: 14.06 KB
: 1K

Belfast Aldergrove

Covering Belfast Aldergrove (EGAA) for FSX, this scenery add-on refreshes the airport’s gate layout, parking stands and taxiway network while introducing a purpose-built fire station, a correctly positioned control tower and assorted objects, giving VFR and IFR pilots a more accurate Irish regional hub for scheduled, cargo and GA ops.

: 2.49 MB
: 1K

Carlisle Airport Scenery by Chris Thompson

Covering Carlisle Lake District Airport (EGNC) in Cumbria, this Microsoft Flight Simulator X scenery rebuilds the former RAF Crosby-on-Eden with a 2-light PAPI on RWY 07, extra general-aviation stands, twin helipads, optional crosswind runway layout and calibrated taxi nodes that restore AI traffic, scaled across Very Sparse through Very Dense autogen layers.

: 452.89 KB
: 995
: 4/5
: 3

Portsmouth Spinnaker Tower

FSX pilots covering United Kingdom legs can insert the Spinnaker Tower landmark in Portsmouth Harbour—170 m (560 ft) of concrete and steel at Gunwharf Quays—featuring reflective glazing, custom night textures and LOD-friendly geometry; this add-on sharpens coastal VFR navigation over the Solent while blending smoothly with default autogen.

: 1.22 MB
: 974
: 1/5
: 1

The Thames Barrier P3D

Adding a geo-correct static model of London’s iconic Thames Barrier, this FSX and Prepar3D add-on slots cleanly into ORBX EU England, supplying a precise reference point for VFR river runs, SID departures from EGLC, or heli training along the tidal Thames—requires the ORBX regional base scenery.

: 584.76 KB
: 972
: 3

UK ANO Objects

Covering 307 charted sites across England, Wales, Scotland and Northern Ireland, this Microsoft Flight Simulator X scenery add-on positions the CAA-listed En-Route Air Navigation Obstacles—radio masts, broadcast towers, chimneys, pylons and stacks—at georeferenced coordinates, supplying UK VFR pilots with faithful landmark beacons, accurate obstruction-clearance cues and sharper low-level situational awareness.

: 336.59 KB
: 966
: 5/5

Birmingham Int'l Airport (Update)

Focused on EGBB—Birmingham International Airport—this FSX scenery add-on update recalibrates DME offsets on both ILS tracks, adds touchdown-zone lighting to runways 15/33, and integrates with prior EGBBX10/EGBBXV11 packages, supporting UK domestic IFR training, VATSIM traffic, and realistic SID/STAR flight planning.

: 28.23 KB
: 957

RAF Bentwaters/Woodbridge

Built for Microsoft Flight Simulator X, this scenery add-on recreates the twin Suffolk USAF stations, RAF Bentwaters and RAF Woodbridge, depicting the complete Cold-War configuration, hardened aircraft shelters, taxiway loops and technical sites while keeping smooth frame rates; 81st TFW AI traffic brings A-10, F-16 and C-130 sortie patterns alive.

: 69.12 MB
: 916
: 1

Orkney Islands Airports

Covering Eday, Sanday, Papa Westray, Westray, North Ronaldsay and Stronsay, this FSX addon refreshes each Orkney GA strip with custom terminal models, accurate grass-and-gravel runway data, AFCAD-aligned parking stands and corrected ICAO identifiers—useful for VFR island hopping, short-field practice and UK regional scenery collectors.

: 19.2 KB
: 858
: 1

EGKB

FSX and Prepar3D flyers gain a refreshed AFCAD for London Biggin Hill EGKB that reshapes aprons via current satellite data, refines taxiway surface mapping, adds GA, corporate and occasional military hardstands, introduces cross-wind runway operation, and applies targeted landclass plus vehicle-route edits for steadier AI traffic at this South-East England airfield.

: 309.04 KB
: 835
: 1

London Helipad

Cover London’s active Battersea heliport (EGLW) with this focused FSX SP2 add-on, presenting photoreal pad markings, refined Thames-bank elevation data, discreet night lighting and tight approach cues for rotor pilots refining confined-area operations over the UK capital; the freeware scenery appears via the standard airport menu, requiring no extra libraries.

: 5.42 KB
: 828
: 1/5

UK Farmstrips Scenery (All Parts)

Covering over 80 rural UK farmstrips in a single FSX package, this conversion stitches Parts 1–3 into UK_FARMS_ALL_GW, bundling a static-objects library, Gerrish Gray foliage textures and optional NDB data. Designed for VFR GM or Generation X photoscenery, the collection restores unflattened grass runways, custom AFCADs and bonus fields such as Branscombe and Wing Farm.

: 27.44 MB
: 819

V1.2 Gloucestershire Airport

Gloucestershire Airport EGBJ v1.2 for FSX refines the Cheltenham–Staverton hub with photorealistic ground imagery, precise runway lighting alignment, and native-format AI schedules that inject realistic GA and business traffic; the scenery uses pure FSX code, ensuring hassle-free operation under SP2 or Acceleration and smooth visual blending with UK photo layers.

: 1.66 MB
: 792
: 2

Exeter Airport UK Expansion

For flight sim pilots navigating southwest England in Microsoft Flight Simulator X, this scenery add-on's fictional upgrade of Exeter Airport (EGTE) extends runway 08/26 to roughly 7 080 ft, inserts a north-side parallel taxiway serving a GA apron and new terminal, fills the airfield with bespoke structures and vegetation, and correctly closes runway 13/31 for more realistic UK regional operations.

: 1.1 MB
: 791
: 2