United States of America

Page 29

Sort

Reset

Essex County Airport

Serving the busy New York–New Jersey general-aviation corridor, Essex County Airport (KCDW/CDW) scenery for Microsoft Flight Simulator X deploys high-resolution orthoimagery, custom 3-D terminals, updated AFCAD data, dynamic night environment and precise taxiway signage across runways 4/22 and 10/28, blending seamlessly with wider USA northeast terrain for consistent VFR and IFR routing.

: 3.39 MB
: 352
: 5/5
: 3

Catalina Island

Covering Catalina Island’s ‘Airport in the Sky’ (KAVX) plus Pebbly Beach (L11), San Clemente Island (KNUC) and North Island NAS (KNZY), this FSX add-on injects structures, marinas, terrain mesh and custom vegetation into Southern California VFR routes; built with Instant Scenery and Acceleration libraries, it favours visual richness over FPS, useful for pilots practicing short-field approaches and circuits around the Channel Islands.

: 10.72 MB
: 352

Canyonlands Field/Moab Airport

Canyonlands Field (KCNY) AFCAD for FSX adjusts taxiway geometry, ramp extension, hangar footprint and apron layout to current FAA charts, incorporates Redtail Aviation FBO, helipads, static GA traffic and updated autogen exclusion, giving Utah bush pilots accurate runway markings, fuel truck service and Denver regional carrier gate data.

: 3.04 MB
: 350

Scappoose Industrial Airpark

A photoreal upgrade for FSX users focused on KSPB Scappoose Industrial Airpark in Oregon’s Pacific Northwest Sauvie Island corridor; the package integrates high-resolution ground imagery, a hand-textured red barn with mailbox and floral details, selective static GA traffic, a 1955 Ford pickup, adjacent houses, fencing and low-impact autogen to preserve frame rate.

: 60.24 MB
: 350
: 4

Glacier Peak

Bush-flyers will find this FSX add-on places a fictional glacier-top strip on Washington’s Glacier Peak, coupling custom terrain mesh, seasonal photoreal bitmaps and corrected elevation data to render realistic ridgelines for short-field, high-density-altitude operations across the Pacific Northwest backcountry.

: 206.42 KB
: 350
: 1

Bradley Int'l Airport

Tailored for FSX pilots exploring New England, this AFCAD update for Bradley International Airport KBDL restores missing jetways, adjusts parking codes for authentic airline allocation, and aligns stands with current FAA charts, enhancing AI traffic behaviour on runways 6/24 and 15/33 while leaving the default terrain mesh intact.

: 91.12 KB
: 349
: 1

CCCFSX

Covering the California Central Coast corridor from Paso Robles to Santa Barbara, CCCFSX for Microsoft Flight Simulator X injects 22 bespoke landmarks, refined AFCADs across eight airfields (PRB, SBP, L52, SMX, LPC, VBG, IZA, SBA), animated windsocks, custom night illumination, AI traffic, radar arrays and improved coastline-landclass data for steady frame-rates during VFR or IFR sorties.

: 6.06 MB
: 348
: 1/5
: 3

Birds Volume 2 Dolphin Bay

FSX Birds Volume 2: Dolphin Bay situates animated AI dolphins within a custom BGL off Oahu’s south-east coast, giving Hawaii flyers a touch of marine wildlife during coastal VFR hops; designed for default terrain or MegaScenery Hawaii, the lightweight add-on respects frame rates when Advanced Animations is active.

: 445.36 KB
: 348
: 4

Joe's Outpost

Bean Island’s JO01 airstrip extends Alaska bush-flying options in FSX, adding a compact 3D outpost with two general-aviation hangars and a log cabin whose doors, chimney fire and smoke animate through NAV1/NAV2 triggers; ideal for STOL practice, VFR hops and coastal supply runs along Alaska’s southern panhandle.

: 7.33 MB
: 347
: 1

Dobbins Air Reserve Base

This FSX scenery package refines KMGE Dobbins Air Reserve Base in Marietta, Georgia with revised AFCAD parking, true-to-chart runway gradients, detailed maintenance hangars, photoreal aprons, calibrated PAPI and taxiway lighting, plus an optional static C-130 library—ideal for military logistics patterns, GA cross-country hops and southeastern USA route planning.

: 653.18 KB
: 347

Greater Rochester International Airport

Addon revises NY’s Greater Rochester Intl. Airport KROC for Microsoft Flight Simulator X, providing ADE-crafted optional crosswind operations, updated taxiway network, mapped airline gate codes, expanded parking stands, service vehicle routes, additional fuel trucks, animated jetway textures and a control-tower roof viewpoint suitable for circuit observation.

: 45.15 KB
: 345

Greater Kankakee Airport

Covering Illinois’ Greater Kankakee Airport (KIKK / IKK), this FSX add-on refreshes the South Chicago general-aviation field with accurate AFCAD data, photoreal aprons, custom hangars, dynamic lighting, default-friendly AI traffic and corrected navaids, giving instrument practice on runways 4/22 and 16/34 while fitting smoothly into U.S. Midwest VFR scenery.

: 4.09 MB
: 344
: 1/5
: 2

NAS North Island High Mast

FSX NAS North Island High Mast adds the 160-foot steel mooring tower to KNZY, San Diego, recreating the 1924 visit of rigid airship USS Shenandoah; this lightweight scenery layer integrates with the existing North Island NAS terrain, supplying a clear visual marker for VFR circuits, naval aviation drills and historic airship operations.

: 806.68 KB
: 344
: 1

St. George Airport

St. George Regional Airport scenery for Microsoft Flight Simulator X refines Utah’s KDXZ with photoreal ground polys, corrected runway 01/19 dimensions, accurate taxiway signage, updated ILS and navaid data, plus terrain blending into desert plateaus—an ideal add-on for virtual pilots operating GA hops or regional jet routes across the Southwest.

: 2.76 MB
: 342
: 1

Caribbean Seaplane Tours Fix

Compatibility update integrates the Caribbean Seaplane Tours package (CSPTCW) with Microsoft Flight Simulator X Acceleration, replacing legacy Key West, Key West Harbor and Marathon folders to clear alpha-channel artifacts and scenery overlaps while adding refined coastal mesh, corrected AFCAD files, photoreal shoreline tiles and glassy-water starts for floatplane, hydroplane and amphibian tour ops around the lower Florida Keys.

: 30.74 KB
: 342

Movie Maker Studio And Tour

This FSX add-on situates a Hollywood-style studio complex at KWHP Whiteman and extends to WWI film sets at KTLR Mefford Field and 1Q1 Eckert Field, bringing trench lines, dedicated AI traffic, custom aircraft skins and varied VFR hops across California’s citrus belt to Flight Simulator X users.

: 26.14 MB
: 341
: 5

Kona International Airport Fix

FSX flyers updating Hawaiian charts will welcome this PHKO Kona International AFCAD revision, realigning ramp geometry and enlarging parking stands so ATC can allocate any coded gate, matching Ellison Onizuka Kona International’s current apron layout, taxiway links, and airline parking codes for smoother AI traffic flow.

: 7.97 KB
: 338

Birds Volume 3 Big Mamma

Big Mamma layers an AI bird flock over Oahu, bringing audible wing-beats and scripted aerial circuits that span Waikiki, Diamond Head and the Koʻolau ridges; the ecological overlay blends with default or MegaScenery textures, enriching FSX’s Hawaiian atmosphere while keeping frame-rate overhead to a minimum.

: 356.14 KB
: 338
: 4

AFX File For KSRY

KSYR Syracuse Hancock International Airport AFX revamp for FSX updates the stock layout with extra jetway-equipped gates, airline-coded parking, relocated cargo apron, expanded GA stands and Air National Guard combat slots, aligning with current charts; compatible with afcad-style tweaks, Flight1 AFX, Ultimate Terrain X, Ground Environment X and World of AI traffic.

: 16.12 KB
: 337

Charlotte International Airport

Charlotte Douglas International Airport (KCLT) scenery for FSX updates runway numbering, realigns taxiway geometry and assigns accurate AI parking codes and airline gates, bringing the busy North Carolina hub in line with current charts; Dusty Bizub’s sixteenth revision enhances ATC sequencing, ramp spacing and jetway reach.

: 22.62 KB
: 337